http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다공체 내 연소의 열광전 발전에의 적용과 단일, 다중채널 및 다공체 내 초과 엔탈피 연소의 상사성
이대근(Dae Keun Lee) 한국연소학회 2012 KOSCOSYMPOSIUM논문집 Vol.- No.45
Thermophotovoltaics is the direct energy conversion technology from thermal to electric (voltaic) energy via photon radiation, without any thermodynamic cycle. It is, in general, accomplished by immersing solid body in high temperature heat source (e.g. combustion field), in order to achieve high intensity irradiation, and by receiving the radiation thereof on photovoltaic cells. In this paper, advantages of combustion in porous inert medium in applying to the thermophotovoltaics are discussed in a view of its excess enthalpy features. In addition, the similarities of flame behaviors in porous inert medium to both in single and multi-channels are described.
TGA/DSC, DTF를 이용한 미분탄의 산소 연소 및 NO<SUB>x</SUB> 배출 특성에 관한 실험적 연구
이대근(Dae Keun Lee),서동명(Dong Myung Seo),노동순(Dong-Soon Noh),고창복(Chang-Bog Ko) 한국연소학회 2007 KOSCOSYMPOSIUM논문집 Vol.- No.-
In a view of capturing CO₂ as a greenhouse gas, an experimental study was conducted on the combustion characteristics of pulverized coal in O₂/CO₂ environment using TGA/DSC and DTF facilities. The effects of gas composition and concentration on the processes of devolatilization and char burning experienced by coal particles in combustion furnace and on the concentration of products such as CO₂, CO and NOx were observed using TGA/DSC and DTF respectively. As results, it were found that the rate of devolitilation is nearly independent on the O₂ concentration if it is over 20% but the char burning rate is a sensitive function of O₂ percent, and the two rates can be controlled by O₂ concentration in order to be similar with those of air combustion case. It was also found that high concentration CO₂ can be captured by oxy-coal combustion and high concentration of CO and low value of NOx are exhausted in that case. Additionally, NO reducing reaction by CO with char as catalyst was observed and a meaningful results were obtained.
열에너지 다소비 산업설비 고효율 기술보급을 위한 스마트 설계 플랫폼
이대근(Dae Keun Lee),이민정(Min Jung Lee),이후경(Hookyung Lee),정우남(Woo-Nam Jung) 대한설비공학회 2021 대한설비공학회 학술발표대회논문집 Vol.2021 No.6
본 연구는 열에너지 다소비 산업설비를 대상으로 고효율 기술의 보급 확산을 촉진하기 위해 개발되고 있는 스마트 설계 플랫폼에 관한 것이다. Level 1의 공정설계와 Level 2의 기기설계 및 온-오프라인 연계 컨설팅으로 구성되어 있는 본 플랫폼은 Web 상에 구축되어 기술 수요자와 기술 공급자가 자유롭게 참여할 수 있는 가상공간이다. 플랫폼 참여를 통해 기술 수요자는 주문 맞춤형으로 제작되는 열에너지 다소비 산업설비의 기본 및 상세설계를 손쉽게 할 수 있으며, 기술 공급자는 자신이 개발한 기술을 플랫폼에 제공함으로써 기술의 폭넓은 실시를 수월케 하고 그에 따른 보상을 받을 수 있다. 플랫폼에 탑재될 대상 기기의 종류는 현재 연소기, 공업로, 건조기, 히트펌프, 열교환기, 탈질 반응기, 집진기 등이며, 각 기기별로 다양한 종류의 기술이 설계 모듈 형태로 제공될 것이다. 이를 활용함으로써 플랫폼 사용자는 다양한 열에너지 산업설비를 직접 설계하여 그 효율을 예측해 볼 수 있으며, 그 설비를 구성하는 단위 기기의 설계 도면 또는 상용제품 추천결과를 얻을 수 있다. 이러한 스마트 설계 플랫폼이 지속가능한 생태계를 구축할 수 있다면 고효율 기술의 보급 확산과 함께 국가에너지 및 환경 문제의 해결에 크게 기여할 수 있을 것으로 기대된다.