http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이능헌,최명규,박종국,김두석 한국전기전자재료학회 1989 電氣電子材料學會誌 Vol.2 No.1
본 연구에서는 고분자-고분자 및 고분자-금속-고분자의 구조를 갖는 2층고분가물질에 관한 전도전류특성이 조사되었다. 그 결과 2층고분자시료의 전도전류는 인가전압의 극성에 따라 차이가 있었으며 폴리에틸렌과 산화폴리에틸렌으로 구성되는 2층시료 PE-OxPE의 경우 OxPE의 산화도가 증대될 수록 전도전류값이 증가하는 것으로 나타났다. 또한 2충시료 PE-EVA에 대한 전도전류의 극성효과는 (+)극으로부터의 전하주입성이 뛰어난 EVA의 특성에 기인한다. 2층 고분자시료의 중간에 금속(Al)이 삽입된 PE-Al-EVA계의 전도전류특성은 Maxell-Wagner모델에 의한 이론에 대체로 부합되지만 이때의 전도전류는 PE-EVA의 구조보다 낮게 관측되었다.
진공 인라인 실장에 의해 제작된 플라즈마 디스플레이 패널의 전기적ㆍ광학적 특성
박성현,이능헌,Park, Sung-Hyun,Lee, Neung-Hun 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.4
The optical and electrical characteristics of plasma display panel(PDP) using the vacuum in-line sealing technology compared with the conventional sealing process in this research. This PDP consisted of MgO protecting layer by e-beam evaporation and battier rib, transparent dielectric layer, dielectric layer, and electrodes by screen printer and then sealed off on Ne-Xe(4 %) 400 Torr and 430。C. The brightness and luminous efficiency were good as the base vacuum level was higher, and it was to check the advantage of high vacuum level sealing, one of the strong points of the vacuum in-line sealing process. However, the brightness and luminous efficiency was dropped sharply because of a crack on MgO protecting layer by the difference of the expansion and contraction stress on high temperature in the vacuum states between MgO and substrate. Fortunately, the crack was prevented by MgO was deposited on higher temperature than 300。C. Finally, the PDP, was fabricated by the vacuum in-line sealing process, resulted the lower brightness than processing only the thermal annealing treatment in the vacuum chamber, but the luminous efficiency was increased by the reducing power consumption with the decreasing luminous current. The vacuum in-line sealing technology was not to need the additional thermal annealing process and could reduce the fabrication process and bring the excellent optical and electrical properties without the crack of MgO protecting layer than the conventional sealing process.
이덕출,이능헌 경북대학교 센서기술연구소 1992 연차보고서 Vol.1992 No.-
습도센서란 습도변화에 따른 전기적 성질의 변화를 이용하는 것으로서 염화리튬과 같은 전해질계, 유기 고분자의 친수성및 팽윤성을 이용한 유기재료계, 수분의 흡착, 탈리현상을 이용한 세라믹스계가 있다. 이중 세라믹스는 물리적, 화학적, 열적으로 안정하기 때문에 감습소자의 재료로 최적이라 할 수 있으며 이를 이용한 습도센서의 개발에 연구가 집중되고 있다. 본 연구에서는 친수성이 강한 알칼리토족계 원소를 이용하여 감도가 뛰어나고 안정성이 우수한 감습소자를 개발하였다. The humidity sensitive properties of Ca(Ti,V)O_3 were investigated. The impedance of specimen decreased with increasing V^Os substitution amount, and 1 mol% V_2O_5 substituted specimen showed the best humidity sensitivity. Electrode materials affected the sensitivity and Pt was the most suitableelectrode. Hysteresis phenomenon was hardly observed, and the humiditysensitivity was stable on atmosphere temperature and heat treatment.
Sol-Gel법에 의한 TiO₂박막의 습도감지특성에 관한 연구
유도현,이능헌,강대하,윤문수,이덕출 경북대학교 센서기술연구소 1991 센서技術學術大會論文集 Vol.2 No.1
In this study, TiO_(2) thin films were fabricated by Sol-Gel Method. The thin films by Sol-Gel Method were shown uniform on the surface of films by SEN. The heat treatment temperature of TiO_(2) thin films is at 500℃. The dielectric properties with variation of the synthesis condition were investigated and the specimens had difference of permittivity according to the synthesis condition. The change of thickness of TIO_(2) film was studied with the number of dipping. The thickness of TIO_(2) film was increased with the number of dipping and it wits increased 0.1-0.3μm every a dipping.
이덕출,이능헌,김용혁 경북대학교 센서기술연구소 1991 연차보고서 Vol.1991 No.-
인간의 五感을 대신하여 측정대상물로부터 정보를 감지하여 전기적 신호로 변환시키는 역할을 담당하는 센서는 산업의 고도화를 위하여 반드시 필요한 핵심부품이며 이를 제작, 활용하는 기술은 濕度, 溫度, 光, 電磁氣, 超音波, 바이오센서 등 여러 가지가 있지만 습도센서는VTR. 컴퓨터. 자동차등 전기, 전자, 기계공학은 물론 의학, 농학 각종 생산공정 등 그 응용범위가 가장 광범위하고 최근에는 산업이 고도화됨에 따라 초정밀의 습도센서가 다량 요구되어 지고 있다. 습도센서는 습도에 의한 전기적 성질(抵抗, 容量)의 변화를 이용하는 것인데 이에는 염화리튬과 같은 전해질계, 유기고분자의 親水性 및 膨潤性을 이용한 유기재료계 및 수분의 吸着, 脫離현상을 이용한 세라믹스계가 있다. 역사적으로는 전해질계로부터 유기물계, 세라믹스계로 발전을 해왔는데 세라믹스계는 본질적으로 물리적, 화학적, 열적으로 안정하기 때문에 현재 습도센서의 대부분을 차지하고 있으며 이에 대한 연구가 다수 보고되고 있다. 본 연구에서는 위와 같은 세라믹스계의 장점을 이용하여 퍼보스카이트(pervoskite)형의 Pb(Zr, Ti)O_3 Nb_2O_5를 첨가하여 저항을 현저히 낮추었으며 多空質구조를 지닌 습도센서를 제작하였다. 그리고 저항 검출방식은 물론 커패시턴스 검출방식을 이용하므로써 기존 세라믹 습도센서의 저항 검출방식에 의한 감습도가 다소 떨어지는 단점을 보완하였다. 이에 대한 諸般 감습특성을 결과에 나타내었다.