http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
CaO-Al<sub>2</sub>O<sub>3</sub>계 용융화합물의 물리·화학적 특성에 관한 연구
이근재,구자술,김진만,오상윤,Lee, Keun-Jae,Koo, Ja-Sul,Kim, Jin-Man,Oh, Sang-Yoon 한국콘크리트학회 2013 콘크리트학회논문집 Vol.25 No.2
이 연구에서는 CaO-$Al_2O_3$계 급냉 제강슬래그(RCSS)의 물리 화학적 특성을 분석함으로써 친환경 무기 급결재로 활용방안을 모색하고자 하였다. RCSS의 성상은 섬유상과 구상으로 구별되었으며, 성상별로 CaO와 $Fe_2O_3$ 성분 함량이 반비례 경향을 나타냈다. 또한 CaO 함량이 낮아지고 $Fe_2O_3$ 함량이 증가함에 따라 강열감량은 (-)경향을 보였고 밀도는 증가하였다. 수은압입법에 의한 세공분포는 서냉 제강슬래그(SCSS)에 비해 매우 낮은 수치로 급냉에 의해 내부결함 및 미세기공률이 현저히 줄어든 것을 확인할 수 있었다. 급냉 제강슬래그를 구성하는 주요 광물을 분석하기 위해 XRD, f-CaO 정량, SEM-EDAX 분석을 실시한 결과에서 f-CaO의 존재는 관찰되지 않았으며, 구성성분이 주로 $C_{12}A_7$과 반응성 ${\beta}-C_2S$로 이루어져 있음을 확인할 수 있었다. This study is aimed to identify the method to use the CaO-$Al_2O_3$ system of rapidly cooled steel making slag (RCSS) as the environment-friendly inorganic accelerating agent by analyzing its physical and chemical properties. The fraction of rapidly cooled steel making slag is distinguished from its fibrous, and the contents of CaO and $Fe_2O_3$ are inversely proportional across different fractions. In addition, as the content of CaO decreased and the content of $Fe_2O_3$ increased, the loss ignition tended to become negative (-) and the density increased. The pore distribution by mercury intrusion porosimetry is very low as compared to the slowly cooled steel-making slag, which indicates that the internal defect and the microspore rate are remarkably lowered by the rapid cooling. To analyze the major minerals the rapidly cooled steel-making slag, XRD, f-CaO quantification and SEM-EDAX analysis have been performed. The results shows that f-CaO does not exist, and the components are mainly consisted of $C_{12}A_7$ and reactive ${\beta}-C_2S$.
파이넥스 슬래그 미분말을 혼합한 시멘트 페이스트의 유동특성
이근재,변승호,송종택,Lee, Keun-Jae,Byun, Seung-Ho,Song, Jong-Taek 한국세라믹학회 2009 한국세라믹학회지 Vol.46 No.6
In this study, rheological properties of cement pastes containing ground Finex-slag (4000, 6000, 7000 c$m^2$/g) were investigated bymini-flow test and coaxial cylinder viscometer. And also blast furnace slag(4000, 6000, 7000 c$m^2$/g) were used for comparison. According to the experimental results, Finex-slag and blast furnace slag showed very similar trend in the rheological properties of the cement pastes. The fluidity of cement pastes blended Finex-slag and blast furnace slag powder were improved by high replacement ratio. In the relationship of plastic viscosity and yield stress appeared the tendency of the proportion greatly. And in the relationship of plastic viscosity, yield stress and mini-flow appeared the tendency of the inverse proportion.
Printed Electronics용 금속 나노입자 개발 및 응용: 잉크젯용 금속잉크에의 적용
이근재,좌용호,Lee, Kun-Jae,Choa, Yong-Ho 한국분말야금학회 2008 한국분말재료학회지 (KPMI) Vol.15 No.2
최근프린팅기술은 전자부품소재 산업의 대형화 및 저가격화의 해법으로 기대되고 있다. 특히 전자부품소재 프린팅 기술 중 잉크젯공정은 최신 디스플레이용 전극소재, PCB, FPCB 및 기타 소재공정에 이용하려는 움직임이 활발히 진행되고 있다. 그러나 잉크젯 기술은 재료의존도 비중이 높은 기술로서 소재(금속잉크)의 개발이 최우선시 되어야한다. 전자부품소재용 금속잉크에 사용되는 금속 나노입자는 우수한 전기전도성과 산업적응용이 가능해야 한다. 따라서 최근 연구되고 있는 금속 나노입자의 연구결과 중 전자잉크에 적용 가능한 연구결과와 응용분야에 대하여 서술하였다.
이근재,주연준,소용대,김남훈,이재성,좌용호,Lee Kun-Jae,Joo Yeon-Jun,So Yong-Dae,Kim Nam-Hoon,Lee Jai-Sung,Choa Yong-Ho 한국분말야금학회 2006 한국분말재료학회지 (KPMI) Vol.13 No.1
Through the volume change of Sn in a low-temperature phase transformation, the Sn nanopowder with high, purity, was fabricated by an economic and eco-friendly process. The fine cracks were spontaneously generated. in, Sn ingot, which was reduced to powders in the repetition of phase transformation. The Sn nanopowder with 50 run in size was obtained by the 24th repetitions of phase transformation by low-temperature and ultrasonic treatments. Also, the $SnO_2$ powder was fabricated by the oxidation of the produced Sn powder to the ingot and milled by the ultrasonic milling method. The $SnO_2$ nanopowder of 20 nm in size was fabricated after the milling for 180 h.
이근재(Lee, Keun-Jae) 한국화재소방학회 2010 한국화재소방학회 학술대회 논문집 Vol.2010 No.추계
본 연구는 아직 초보수준인 국내기업의 업무연속성 유지를 위한 재해경감 활동계획 수립 및 실행에 대한 방향을 제시하였으며, 조기대응체계 구축을 통하여 어떠한 재난에도 안전을 기할 수 있는 기업 연속성 유지 방안을 모색하였다. 이를 실현하기 위하여 국내 재난관리 표준으로 채택된 사고대비 및 업무연속성관리 가이드라인을 분석하였고, 국내기업에 쉽게 적용할 수 있는 실행지침을 제시하였으며, A기업을 대상으로 재해경감활동계획수립 및 정보기술을 활용하는 방안을 연구하였다. 특히 사고대비 및 업무연속성관리의 가이드라인 5단계 주요 절차 중 계획수립단계의 위험 평가, 영향분석, 예방경감계획 및 대응관리계획 수립에 대한 모델을 제시하였고 국내 재해경감활동이 활성화되기 위한 방안을 도출하였으며, 재난대응 수준을 향상시키기 위하여 필요한 정보기술 부분도 제시하였다.