http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고에너지 전자빔 투사방법으로 제조된 2층 비정질 합금 표면복합재료의 미세조직 연구
이규홍,윤은섭,이성학,김낙준 대한금속재료학회 2004 대한금속·재료학회지 Vol.42 No.9
This study is concerned with the fabrication of two-layered amorphous/Cu surface composites by high-energy electron-beam irradiation. The mixture of Zr-base amorphous powders and LiF+MgF₂ flux was deposited on a pure Cu substrate, and then electron beam was irradiated on these powder mixture to fabricate a one-layered surface composite. A two-layered surface composite was also fabricated by irradiating electron beam again onto the powder mixture deposited on the one-layered surface composite. The composite layers of 1.6~1.7 mm in thickness were homogeneously formed without defects, and the two-layered composite contained a few fine crystalline phase particles in the amorphous matrix. This fabrication could be achieved by (1) the use of flux which protected the oxidation environments, (2) the second electron-beam irradiation which melted already-formed crystalline particles, and (3) the fast cooling rate of the irradiation method which provided the high amorphous forming ability. Such a development of the fabrication technique of amorphous alloy surface composites presented new applicability of amorphous alloys to structures and components requiring excellent mechanical properties.
고에너지 전자빔투사방법으로 제조된 (CrB, MoB)/탄소강 표면복합재료의 경도와 내마모성
이규홍,남덕현,이성학 대한금속재료학회 2005 대한금속·재료학회지 Vol.43 No.3
The present study is concerned with the improvement of hardness and wear resistance in (CrB, MoB)/ carbon steel surface composites fabricated by high-energy electron beam irradiation. Three kinds of powder mixtures, i.e., 5OCrB-50MgF₂(flux), 5OMoB-50MgF₂, 25CrB-25MoB-50MgF₂ (wt.%), were placed on a plain carbon steel substrate, which was then irradiated with electron beam. In the specimens fabricated with flux powders, the surface composite layer of 0.8-1.3 mm in thickness was successfully formed without defects, and contained a large amount (up to 48 vol.%) of Cr_(1.65)Fe_(0.35)B_(0.9) or Mo₂FeB₂ in the martensitic matrix. The hardness and wear resistance of the surface composite layer were directly influenced by hard borides, and thus were about 3 to 7 times greater than those of the steel substrate. Particularly in the surface composite fabricated with CrB and MoB powders, the wear resistance was most excellent because the hardness of the cell boundary region and martensitic matrix was very high and because borides were connected to form a network structure along cell boundaries. (Received January 19, 2005)
이규홍 한국저작권위원회 2013 계간 저작권 Vol.26 No.1
비록 완벽하지는 않지만 저작권제도가 문화 및 관련 산업의 향상․발전을 위하여 오랜 기간에 걸쳐 검증된 효율적인 제도라는 점은 일반적으로 받아들여지고 있다. 그러나 저작권의 범위가 넓어짐에 따라 권리의 실효성면에서 그 구제현황이 점점 중요해지고 있는바 민사적 구제현황에 관하여는 손해배상책임이 인정됨을 전제하고 손해배상액 산정을 위한 심리방식과 범위만을 논의하고자 하며 나아가 형사적 제재, 행정적 구제의 현황도 간략히 살펴보고자 한다. 우선 민사적 구제방법은, 개략적 사건현황에서 보듯이 가처분 사건, 본안사건 모두 그 사건 수 자체가 그리 많지는 않으나 증가하는 추세임이 틀림없다. 그런데 지금까지 저작권침해금지가처분사건은 본안화 현상이 심해지고 있는 부분임에도 그 인용률이 다른 종류의 가처분에 비하여 낮은 편이고, 정작 본안사건의 경우는 손해배상액이 너무 적은 점, 사실심법원 심리에 전문성이 떨어지고 판결이 지연되는 점이 문제로 지적되어 오다가 최근 이에 관하여 국가지식재산위원회 등에 의한 논의가 활발하고 그 일부를 반영한 법개정도 이루어진 바 있다. 여기서 실질적인 구제의 효율성을 실증적으로 살펴보기 위하여는 권리자가 보다 용이하게 손해배상을 청구할 수 있도록 하고 있는 저작권법상의 관련규정을 시발점으로 구체적인 손해배상액 산정현황을 살펴볼 필요가 있고, 판결례를 중심으로 관련규정들의 적용례와 문제점, 적용기준 등을 살펴본 결과 제126조의 사용빈도가 높은 점 및 그 적용을 위하여는 과거 보다 간접사실이 충실히 기재될 것이 요구되고 있고 실질적으로도 그런 경향이 있음을 알 수 있다. 그리고 이번에 신설된 증거조사제도 규정, 소송당사자에 대한 비밀유지명령 규정, 법정손해배상 제도의 의미 및 개략적 운용방향도 논의한다. 다음 형사적 제재 현황을 살펴보면 최근 정부의 강력한 단속 의지와 권리자들의 적극적 노력에 힘입어 저작권법을 위반하는 건수도 하락곡선을 그리고 있다는 점을 들 수 있고, 행정적 규제 면에서 보면 행정부처에 의한 규제가 그 건수와 영향력에서 큰 비중을 차지하는 것을 볼 수 있다. 저작권침해에 대한 구제방법은 민사적인 것이 주류일 것이나 형사적, 행정적인 것도 역시 일정한 역할을 하고 있음을 알 수 있다. 하지만 향후 신설된 제도의 운영과 손해배상액의 산정 방법개선, 전문성 확보 등과 관련된 법원의 역할이 점점 더 중요해질 것은 분명해 보이고 이용자들의 저작권 준수의식 제고를 위한 각 방면의 노력이 필요함은 당연하다.