http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
글리세롤 탈수반응에서의 촉매 제조 방법 차이에 따른 반응 활성 및 특성
이규암,김영철,박남국,문동주 한국공업화학회 2014 한국공업화학회 연구논문 초록집 Vol.2014 No.1
글리세롤을 고부가 가치로 전환하는 기술 중에 글리세롤의 탈수반응을 통해 아크롤레인을 생성하는 기술이 있다. 글리세롤의 탈수반응은 주로 산촉매 상에서 이루어지고 있다. 본 연구에서는 기존의 인산이 담지된 나이오븀 산촉매에 간단한 처리를 통하여 촉매를 만들었고, 제조 방법에 차이에 따른 글리세롤 탈수 반응 활성 및 그 특성을 알아보았다. 실험 조건은 300°C에서 10 wt%인 글리세롤 수용액을 기화시켜 310°C로 유지되는 고정층 쿼츠 반응기에서 기상 탈수반응 실험을 수행하였다. 촉매 양은 0.4g을 사용하였고 캐리어 가스로는 10cc/min으로 Ar을 흘려주었다. Offline GC/MS를 사용하여 반응 후 1시간 이후부터 6시간 까지 1시간 간격으로 기체 상태의 생성물을 콜드트랩에서 액화시켜 분석하였다.
치매노인보호자의 부양부담이 대인관계문제에 미치는 영향에 관한 융합연구 : 가족지지의 조절효과를 중심으로
서정열,최장원,박규암,장대연 한국융합학회 2018 한국융합학회논문지 Vol.9 No.8
본 연구는 치매노인보호자의 부양부담이 대인관계문제에 미치는 영향에서 가족지지의 조절효과를 검증하고, 이를 바탕으로 사회복지적 함의를 제시하는 것을 목적으로 한다. 이를 위해 수도권 7곳, 지방 11곳에 위치한 주간보호센터 및 치매지원센터를 이용하는 치매노인의 보호자 중 자녀 및 며느리 341명을 대상으로 자기보고식 설문조사를 실시하였고, 본 연구에서는 불성실한 응답을 제외한 326명을 최종 분석에 사용하였다. 연구의 가설을 검증하기 위하여 빈도분석, 기술통계 분석과 다중회귀분석을 사용하였다. 분석 결과, 치매노인보호자의 50.9%가 높은 부양부담을 경험하고 있으며, 43.6%가 고위 험의 대인관계문제를 가지고 있는 것으로 나타났다. 회귀분석을 실시한 결과, 부양부담은 대인관계문제에 정적인 영향관계 를 가지는 것으로 검증되었다. 또한, 가족지지는 부양부담과 대인관계문제간의 관계를 조절하는 것으로 확인되었다. 이들 바탕으로 하여 부양부담으로 인해 대인관계문제를 겪고 있는 치매노인보호자들을 위한 가족 및 대인관계 개선 프로그램 도입 등의 실천적, 정책적 개입 방안을 제언하였다. The purpose of this study is to examine the effects of caregiving burden on the caregiver’s interpersonal problem. In addition, mediating effect of family support was examined. In order to accomplish these purposes, a total of 341 sons and daughters in law who are caregivers of dementia elderly using self-report questionnaires. The analysis result of dementia elderly caregiver’s symptoms showed that prevalence of caregiving burden were 50.9% and interpersonal problem were 43.6%. As a result, it was confirmed that the caregiving burden had a statistically significant effect on interpersonal problem. Also, Family support was found to moderate the relationship between caregiving burden and interpersonal problem(p< .05). Based on this result, I suggested the various policies and the necessity of social welfare intervention for caregivers of dementia elderly
산화 소결시 UO2+x 분말의 O/U 비에 따른 소결밀도 및 미세조직의 변화에 관한 연구
서경수,조성석,이규암 대한금속재료학회(대한금속학회) 1987 대한금속·재료학회지 Vol.25 No.10
In this study, a low temperature sintering proces at 1000-1300℃ in CO₂ atmosphere was employed, and three green pellets with O/U ratio of 2.17, 2.19 and 2.49 were used to investigate the effect of the O/U ratio on the microstructure and density of sintered UO₂ pellets. As the O/U ratio of green pellets increased, the quantity of fine grain (i.e., smaller than 2㎛ in diameter) decreased, and the sintered density decreased. When green pellets with O/U ratio of 2.49 was sintered, the monomodal microstructure, which is mainly consisted of uniform and coarse grains (i.e., larger than 30㎛ in diameter), was obtained.
박원구,이종남,이규암 대한금속재료학회(대한금속학회) 1977 대한금속·재료학회지 Vol.15 No.5
UO₂ 소결체의 열적 고밀화에 미치는 영향을 규명하기 위하여 재소결과정에 있어서의 기공의 크기와 그 분포 상태의 변화를 조사하였다. 휘발성 첨가제인 polyethylene glycol 1 weight percentage을 40μ-125μ의 범위로 분류하여 UO₂분말에 건식 혼합하여 제조한 92-96%의 이론밀도(theoretical density)를 지닌 UO₂ 소결체를 1600℃에서 10시간 동안 혼합가스(98.5N₂-1.5N₂) 분위기 내에서 재소결 결과, 2㎛ 이하의 미세기공 조직을 지닌 소결체의 경우 밀도 변화율(Δρ/ρ)은 12.3×10^(-3)인 반면, 40㎛의 조대한 기공이 존재하는 소결체의 경우 밀도 변화율이 가장 낮은 값인 Δρ/ρ=6.0×10^(-3)을 보였다. 본 실험결과 2㎛ 이하의 미세기공 조직은 열적 고밀화 현상이 크고 평균 40㎛이상의 조대한 기공조직은 안정하다는 것이 나타났다. The thermal densification of the sintered UO₂ pellets has been investigated by resintering of them in the terms of variations of pore size and pore size distribution. The pore size and its distribution of presintered pellets were controlled by the addition of 1 weight percentage polyethylene glycol sized in the range of 40-125㎛ as a volatile pore former. The density of the pellets were in the range of 92 to 96% of theoretical density. A review of resintering experiments at 1600℃ for 10 hours in the 98.5 v/o N₂-1.5 v/o H₂ mixed gas indicated that the pellet containing large pores with diameter of 40㎛ had the lowest fractional density change of 6.0×10^(-3), while that of 12.34×10^(-3) had been revealed in the pellet containing finer pores than 2㎛. The observations led to the conclusion that high thermal stability was achieved by forming large pores of around 40㎛ in the pellets and high densification was induced by small pores approximately less than 2㎛.
CO2 분위기에서의 소결 온도 및 시간이 UO2 소결체의 밀도에 미치는 영향에 관한 연구
서경수,조성석,이규암 대한금속재료학회(대한금속학회) 1987 대한금속·재료학회지 Vol.25 No.9
A low temperature sintering in oxidizing atmosphere was employed to obtain high density UO₂pellets. The density of pellets sintered in CO₂ atmosphere followed by reduction treatment in H₂ atmosphere at 1100℃ for one hour was 10.66g/cc (i.e., 97.3% of theoretical density). The measured value is the same as those of pellets sintered at high temperatures above 1700℃ in H₂ atmosphere. When the sintering temperature was higher than 1100℃ (upto 1300℃), the sintered density decreased as either temperature or time increased.