http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Characteristics of Piezoelectric Polymeric PVDF Sensor by Impact Testing
Sojeong Kim(김소정),Ji-Yeon Shin(신지연),Yonghyeon Yun(윤용현),Deuk Yong Lee(이득용),Dong-Ho Yang(양동호),Bae-Yeon Kim(김배연),Yo-Seung Song(송요승) 한국고분자학회 2019 폴리머 Vol.43 No.5
근거리 전기방사법을 이용하여 유량속도 139 nL/min, 전기장 세기 12 kV/cm, 콜렉터 속도 500 mm/s로 18 wt% 폴리(비닐리덴 플루오라이드)(PVDF) 섬유를 제조하였다. PVDF 섬유 모듈은 폴리(에틸렌 테레프탈레이트) 필름 위에 위치하였다. 모듈은 0.5 mm 간격으로 섬유 20줄로 구성되어 있다. 압전성과 진동 센서특성은 Al 외팔보를 이용한 충격실험을 통해 조사하였다. PVDF 센서와 lead zirconate titanate(PZT) 센서는 Al 외팔보 양면 끝에서 5 mm 위치에 에폭시를 이용 부착하였다. PVDF 센서의 전압특성은 PZT 센서보다 200배 정도 작았지만 출력 특성파형은 유사하였다. 파장 측정 결과, 두 센서 모두 Al 외팔보의 고유 파장에서 관찰되었다. The 18 wt% poly(vinylidene fluoride) (PVDF) fibers were near-field electrospun at a flow rate of 139 nL/min, an electric field of 12 kV/cm, and a collector speed of 500 mm/s. A PVDF fiber array consisting of 20 fibers was adhered to the flexible PET film. A PVDF and a lead zirconate titanate (PZT) sensors were attached at a distance of 5 mm from the clamped end of the Al cantilever. The vibration sensing capabilities of sensors were examined by measuring the potential generated by the sensors during impact testing. Although the voltage of PVDF sensor was 200 times smaller than that of PZT sensor, the waveforms of the sensor output were similar. Both sensors were determined to be sensitive to variations in the level of dynamic strain due to the inherent piezoelectricity. The spectral results of both sensors exhibited the same signal generated by natural frequency of cantilever.