http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Zr-Nb계 합금의 석출물 특성과 산화 특성에 미치는 마지막 열처리 온도의 영향
윤영균,정용환,박상윤,위명용,Yun, Yeong-Gyun,Jeong, Yong-Hwan,Park, Sang-Yun,Wi, Myeong-Yong 한국재료학회 2001 한국재료학회지 Vol.11 No.8
Nb 첨가 Zr합금인 Zr-lNb합금과 Zr-lNb-lSn-0.3Fe함금의 석출물 및 산화 특성에 미치는 마지막 열처리 온도의 영향을 알아보기 위하여 최종 열처리 온도를 $450^{\circ}C$에서 $800^{\circ}C$까지 변화시켜 미세조직 및 산화 특성을 조사하였다. 부식 시험은 $400^{\circ}C$ , 수중기 분위기에서 270 일 동안 실시하였으며 X-선 회절법을 이용하여 산화막 결정 구조를 분석하였다. 마지막 열처리 온도가 $600^{\circ}C$ 이상일 때 두 합금 모두 $\beta$-Zr이 관찰되었으며 모두 재결정 이후 마지막 열처리 온도가 상승할수록 석출물의 면적 분율이 증가하는 경향을 나타내었다. 모든 열처리 온도 구간에서 Zr-lNb합금의 부식 저항성이 Zr-lNb-lSn-0.3Fe 합금에 비해 우수하였으며 두 합금 모두 재결정 이후 부식 저항성이 급격히 나빠졌다. 이는 $600^{\circ}C$ 이후 형성된 $\beta$-Zr의 영향으로 밝혀졌다. Effects of final annealing temperature on the precipitate and oxidation were investigated for the Zr-lNb and Zr-lNb-lSn-0.3Fe alloys. The microstructure and oxidation of both alloys were evaluated for the optimization of final annealing process of these alloys in the annealing temperature regime of 450 to $800^{\circ}C$. The corrosion test was performed under steam at $400^{\circ}C$ for 270 days in a static autoclave. The oxide formed was identified by low angle X-ray diffraction method. The $\beta$-Zr was observed at annealing temperature above $600^{\circ}C$. Above $600^{\circ}C$, the precipitate area volume fraction of Zr-lNb and Zr-1Nb-lSn-0.3Fe alloys appeared to be increased with increasing the final annealing temperature. The corrosion resistance of Zr-lNb was higher than that of Zr- lNb-lSn-0.3Fe alloy. The corrosion rate of both alloys were accelerated due to the formation and growth of $\beta$-Zr with increasing the annealing temperature.
VANET 기반의 긴급 차량 우선통과 서비스를 위한 인증 기법
윤영균,정수환 한국통신학회 2008 韓國通信學會論文誌 Vol.33 No.10
본 논문에서는 VANET (Vehicular Ad-hoc Networks) 기반의 첨단 교통관리 서비스에서 실시간 교통제어를 위 해 필요한 긴급 차량 우선통과 시스템에서 요구되고 있는 인증 기법을 제안한다. 제안된 인증 기법은 교차로 상 에서 긴급 차량에 신호 우선권을 부여하기 위한 대리 서명 기법을 적용하여 권한을 부여된 제어 권한을 인증하여 긴급차량들의 소통 상태 확보 및 다른 차량들의 안전성을 향상시킨다. 또한 인가된 제어 권한을 확인하기 위해 필요한 식별 절차에 필요한 ID를 제공하는 대리 서명 기법을 적용하므로 프라이버시를 보호하는 인증 기능을 제 공 한다.
알파술폰 고급지방산 폴리에틸렌글리콘 에스테르류의 계면물성
윤영균,남기대,김진현,연영흠 한국유화학회 1998 한국응용과학기술학회지 Vol.15 No.2
All the surface activities including surface tension, foaming power, foam stability, emulsifying power, dispersion effect, and detergency were measured and critical micelle concentration(cmc) was evaluated in dilute aqueous solution. The cmc evaluated by the Ring method was 10^-3∼10^-4mol/L in case of monoesters, and 10^-3∼5.0×10^-5mol/L in case of diesters, respectively. Surface tension of the aqueous solution was decreased to 45∼50dyne/㎝, showing the tendency that the ability of lowering the surface tension was dependent on increasing of carbon atom number in alkyl chain. Foaming power of all the monoesters was better than that of diesters. while foam stability of diesters was to the contrary. Emulsifying power of soybean oil or benzene was specially expected to be good for emulsifiers in industrial application fields. HLB values of monoesters and diesters evaluated by Griffin's method were in the range of 8 to 12. Dispersion property of ferric oxide was stable in the range of 4.5×10^-5∼5.0×10^-4mol/L in case of monoesters, and 10^-5∼10^-4mol/L in case of diesters.