
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유희준 조선대학교 교육대학원 2005 국내석사
A Study on Scientific Attitudes of Pre-Service Teachers for Exceptional Children Hee-Jun Ryu Advisor : Prof. Hynu-ju Park, Ph.D. Major in Chemistry Education Graduate School of Education, Chosun The purpose of this study was to examine science-related attitudes of preservice teachers for exceptional children. The area of science education has been expanded since the 7th curricula of special education. The science-related attitude is important for preservice teacher to have for science education. The domain of science-related attitudes is one of areas in scientific literacy, the goal of science education. Scientific literacy is knowledge and understand of the scientific concepts and processes required for personal decision making, participation in civic and cultural affairs, and economic productivity. The total of 102 university students majoring special education were participated and the Test of Science-Related Attitudes(TOSRA) is implemented for this study. Dat were collected during the first semester of 2004. As results of the study, science-related attitudes did not significantly differ by gender and by grades. The area of 'Social implication of science' 17.22 and of 'Attitude to scientific inquiry' 16.09 ranked high in science-related attitudes, whereas the area of 'adoption of scientific attitudes' 12.96 and of 'leisure interest in science'13.84 ranked low. Accommodating the scientific attitude where the head of a family basic of scientific attitude becomes is evaluated and most lowly with the fact that the conversion of reserve special teachers scientific attitude will be necessary it is visible. The specific gravity of scientific education is becoming larger little by little from curriculum of special education and it emphasizes the necessity regarding a science and reserve special teachers scientific attitude and scientific knowledge the basic the teacher must be having as element more, the curriculum because is important for the scientific attitude cultivation of the reserve special teachers against with a science from special education organization is visible with the fact that must be provided.
생쥐 배아에 대한 보조부화술의 방법과 유리화 동결 전 처치 시간이 배아 발달에 미치는 영향
Objectives : This study were conducted to investigate the most effective assisted hatching method and adequate vitirification time for the rate of development to the hatched blastocyst in mouse embryos freeze-thaw and culture. Methods : Mouse two-cell embryos were collected and randomly assorted in 6 experimental groups. In control groups, embryos were vitrified 5 or 10 minutes without assisted hatching (Control 5 and 10 group respectively). Mechanically assisted hatching groups were mechanically hatched before vitrification and freezing (MH 5 and 10 group respectively). Laser assisted hatching groups were hatched using laser before vitrification and freezing (LH 5 and 10 group respectively). More than two weeks later, the embryos were cultured after thawing and observed at 24, 48 and 72 hours. Results : After 24 hours, numbers of more than four-cell embryos were significantly higher in Control 10 and MH 5 group than LH 10 group(P<0.05). After 48hours, developmental rate of total blastocyst was not significantly different in each group. However, rate of hatching blastocyst was significantly higher in MH 5 and MH 10 groups compare with other groups. After 72 hours, rate of hatching blastocyst was significantly higher in MH 5 and 10 groups. However, rate of hatched blastocyst was significantly higher in LH 5 group than the other groups. And also LH 10 group was significantly higher than Control 5 group, MH 5 and 10 group. Compare with LH 10 group, LH 5 group showed significantly higher rate of hatched blastocyst. Conclusions : Laser assisted hatching is more effective method for development of the hatched blastocyst in mouse embryos than control and mechanically assisted hatching. In laser assisted hatching, 5 minute vitrification time is significantly more effective than 10 minute.
Definite Knowledge Representation in Rule System
An interesting application area for logic programming that motivates our work is "information-flow" applications enhanced by rule-based intelligent agents. In these applications, agents control the flow of information items. Their tasks include not only finding and filtering, but also categorizing, prioritizing for attention, storing and managing, monitoring and notifying, and selective forwarding, disseminating and sharing. Nowadays its roles are usually described by defaults logic programs. If they happen to occur inconsistent case between formulas in rule system, Some problems will be derived from it. In this thesis, we describe following two results. First, business rules are very important because they constitutes an enterprise's way of doing business. In commercial application, business rules confliction give rise to decreasing system reliability. It causes an unexpected financial loss for system managers and users. Thus, detecting business rules confl iction make a necessary point of developing reliable system. We use formal specification to detect business rules confliction and resolve them. First, we convert business rules that written by natural language to first order logic formula. Second, we establish formal model for DRM system using Z, then describe a technique for detecting business rules confliction in Digital Right Management system using Z/EVES. Second, we describe a new inconsistent case which is susceptible to occur while producing consistent answer set using prioritized default logic. We define new semantics for prioritized default logic in order to solve this problem. There is a sign difference between General and Extended logic programs. Extended logic programs are formulated using classical negation, For this reason, an inconsistent answer set can sometimes be produced. For the most part, default reasoning semantics successfully resolved this problem, but a conflict could still arise in one particular case. The purpose of this
Amino acids have been known to be stabile as cations by protonation under appropriate level of pH, thus, they can be intercalated into interlayer of cationic clay such as montmorillonite by ion-exchange reaction. In this study, we try to prepare clay and amino acid composites refer to previous studies using L-Valine, L-Threonine, L-Glutamic acid, L-Lysine, L-histidine and L-arginine as representative amino acids for guest materials and montmorillonite as clay for host matrix. In results of preparing at pH 1.5, we can obtain uniform amino acid-clay composites using L-lysine, L-histidien and L-arginine. However, initially prepared composites using other amino acid are deintercalated while on washing with distilled water. These results was considered to come from the influence of ionized side chain (R group) in amino acid molecular which has side chain enable ionization under appropriate level of pH (pK R). It was confirmed by further experiments as a function of initial pH. The single phase clay and amino acid composites was obtained from partial amino acids which have a side chain enable ionization under pK R.It was verified by X-ray diffractiometry (XRD) and FT-IR spectroscopy. The amino acid content of composites was calculated from thermal gravimetric (TG) analysis results. 단백질의 중요 구성 물질인 아미노산은 분자 내에 공통적으로 아미노기(NH2)와 카르복시기(COOH)를 가지고 있다. 아미노산의 아미노기와 카르복시기는 특정 pH 영역에서 이온화 되어 각각 양의 전하(NH3+) 와 음의 전하(COO-)를 갖는 것으로 알려져 있으며, 수용액 상에서 안정한 이온상태로 존재하는 것으로 알려져 있다. 한편, Na+-montmorillonite는 대표적인 양이온성 점토로서 층간에 Na+ 양이온이 존재하며, 외부의 다른 양이온 물질과 쉽게 이온교환 반응하여 새로운 형태의 점토 복합체를 형성하는 것으로 알려져 있다.본 연구에서는 특정 pH 영역에서 안정한 양이온성 분자로 존재하는 아미노산을 Na+-montmorillonite에 이온교환반응(Ion-exchange reaction)하여 점토-아미노산 복합체를 제조하였으며, pH, 아미노산 농도, 반응시간에 대한 조건 변화 실험을 수행하여 아미노산 의 이온교환 반응에서 나타나는 점토-아미노산 복합체 제조에 관한 특이성에 대해서 고찰하였다. 실험에 사용된 아미노산으로 L-valine, L-threonine, L-glutamic acid, L-lysine, L-histidien, L-arginine을 선택하여 사용하였다.이온교환 반응이 후 원심 분리하여 채취한 시료의 X-선 회절 분석 결과, 아미노산의 점토 층간 삽입반응(Intercalation)으로 인한 점토의 저면 간격 확대를 확인 할 수 있었으며, 산성의 조건에서 초기 아미노산의 농도가 높을수록, 단일상의 점토-아미노산 복합체가 얻어지는 것을 확인하였다. 하지만, L-valine, L-threonine, L-glutamic acid를 사용하여 제조된 점토-아미노산 복합체는 증류수 세척 과정에서 복합상이 유지되지 못하고 해체되어 다시 원래의 저면 간격을 회복하는 것으로 확인되었다. 반면, L-lysine, L-histidine, L-arginine을 이용한 점토-아미노산 복합체에서는 세척 이후에도 안정한 점토-아미노산 복합체의 제조가 가능하였다. 또한 세척과정에서 복합상을 유지하지 못한 점토-아미노산 복합체에 대해서 다양한 용매를 사용하여 세척을 시도하였으나 어떠한 용매를 사용하여서도 세척이후 단일상의점토-아미노산 복합체를 얻어낼 수 없었다. 이와 같은 세척 과정에서의 문제점은 아미노산의 pH에 따른 구조 변화와 측쇄 그룹 영향으로 설명될 수 있으며, FT-IR 분석 결과에서 나타나는 IR 흡수 band와 frequency로부터 이러한 사실을 확인할 수 있었다. 세척 이후 최종적으로 얻어진, 점토-아미노산 복합체에 대해서 TG/DSC 열분석을 수행하였으며, 그 결과 아미노산은 점토와의 복합화로 인하여 내열성이 향상되고, 이온교환 반응의 pH에 따라 아미노산의 함량과 이온교환 반응률이 달라지는 것을 확인 할 수 있었다.
劉僖俊 淑明女子大學校 大學院 2005 국내석사
1791년 程偉元과 高鶚이 120회 小說『紅樓夢』을 萃文書屋에서 발간하기 전에, 이미 80회분이 『石頭記』라는 原名으로 필사되어 전해지고 있었다. 이때부터 작가 曹雪芹의 親屬 혹은 知人의 입장으로 교정도 하고 편집도 하면서『紅樓夢』에 대해 연구와 평론을 시작한 사람이 바로 脂硯齋 · 畸笏叟 等이다. 이들은 필사본 위에 가장 먼저 批語를 쓴, 『紅樓夢』연구사상 최초의 평론가이다. 脂硯齋의 批評은 李卓吾의 評 · 金聖歎의 評 · 張竹坡의 評 이후, 中國古典小說에 관한 가장 영향력 있는 문예비평으로, 매우 중요한 小說批評의 자료를 제공했으며, 『紅樓夢』의 作家가 曹雪芹이라는 점 외에, 그의 生平事跡에 관한 많은 단서를 제공해 주었다. 따라서 脂硯齋는 中國小說理論 발전에 중요한 공헌을 한 가장 영향력 있는 文藝 批評家라고 할 수 있다. 本稿에서는 서구의 문학비평인 ‘독자중심비평(수용미학이론)’과 중국의 문학비평인 ‘情感中心論’에 입각하여, 脂評을 통한 脂硯齋의 사상 및 그의 예술적 견해를 살펴볼 수 있었다. 수용미학의 차원에서 李卓吾의 이론을 계승하여 소설 『紅樓夢』을 ‘사실주의’와 ‘정감주의’ 관점으로 평가했다고 보고 그의 가치관이 그대로 녹아있는 批語를 통해 ‘사실적 허구론’ 및 ‘정감의 인물론’, 미학적 관점에서의 ‘意境’과 ‘傳神’이론을 살펴보았다. 脂硯齋는 작가가 ‘自譬’를 통해 자신이 겪은 ‘사실적 요소’를 실제보다 더 핍진하게 예술적으로 형상화시켰다고 보았으며, 현실을 닮아내되 그 諷刺의 창끝 역시 은폐시키기 위해 ‘寓意’적 수법을 사용하여 소설로 완성시킨 것이라고 보았다. 또한 才子佳人小說이나 野史類에서 사용하던 일정한 틀의 묘사법(舊俗套)에서 탈피하여 情과 理에 맞게 인물을 묘사해야만 독자들의 情感을 두드릴 수 있다고 주장하였다. 마지막으로 독자는 소설을 통해 繪畵나 詩에서 느낄 수 있는 審美적인 ‘意境’이나 ‘傳神’과 같은 상상의 빈자리를 제공받을 수 있다는 것을 언급했다. 이렇듯 비록 그의 이론이 체계적으로 자리 잡히지 않았지만 구소설의 속박에서 벗어나 새로운 창작 정신을 반영한 사실은 높이 평가되어야만 한다. 수용미학차원에서 李卓吾의 ‘사실주의’와 ‘정감주의’ 정신을 계승하여, 결국 ‘世情說’과 ‘典型論’에까지 영향을 줄 수 있었던 脂硯齋의 가치관 및 소설이론을 살펴볼 수 있는 계기가 될 것으로 보인다. It has been noticed that before Cheng weiyuan and Gao e's published the novel, 『Dream of the Red Chamber』consists of 120 chapters, through 'Cuiwenshuwu' in 1791, 80 chapters of it already had been read as an original title of 『Story of the Stone』. Since that time, it was Zhi yanzhai and Ji husou began to analyze and criticize the 『Dream of the Red Chamber』 with the auspices of Cao xueqin's friends and relatives, in which they corrected and revised the novel. They are the first critics who a review of transcription of 『Dream of the Red Chamber』 in the history of studying that. Since the performances of criticism by Li zhuowu, Jin shengtan, and zhang zhupo, Zhi yanzhai's outcome has been the most influential by offering the invaluable novel criticism as far as the Chinese classical novels. Also, it furnished very crucial materials for Chinese novel criticisms, affording Cao xueqin's entire life trace of achievement other than the fact that Cao xueqin is the author of the 『Dream of the Red Chamber』. Consequently, I believe that Zhi yanzhai is the most influential literary reviewer who contributed to the Chinese novel theory's flourishing. In this thesis, based on the reader 'Aesthetics of Reception Theory' of the western literary criticism and 'the emotion centered theory of Chinese literary criticism, Zhi yanzhai's idea and his thought of art could be considered in "Red inkstone" commemtary. In the criticism of Zhi yanzhai, considering 『Dream of the Red Chamber』 to be appreciated in the view of 'realism' and 'emotionalism' succeeding to Li zhuowu's theory in the aspect of 'Aesthetics of Reception', I advanced the theory of fiction, the theory of character, and the theory of aesthetic on it with his thought. Zhi yanzhai deemed that the author artistically embodied the reality that he experienced more realistically than the actual by applying self-comparison, and that he completed the novel by using metaphor to conceal the bitter satire while expressing actuality. Also, Zhi yanzhai asserts that novel can inspire the reader with feelings only when breaking stereotyped description of old expression in either novels of a young man of wit and a girl of beauty or an unofficial history and portraying the characters with 'emotion' and 'reason'. Finally, he stated that novel can afford the readers the emptiness for imagination which can be felt in paintings and poetry such as including the author's feeling of entire life and philosophical reason and drawing with spirit. Thus, although it is not set up systematically, his theory reflecting creativity, deviated from former novel system, should be estimated highly. I believe that this thesis would provide an opportunity that we can study Zhi yanzhai's thought and novel theory which succeeded to Li zhuowu's 'realism' and 'emotionalism' in the light of 'Aesthetics of Reception' and ultimately influenced even the theory of world affairs and the theory of type.
공간 해상도 감축을 위한 변환 부호화 기법에 관한 연구
본 연구에서는 낮은 비트율로의 변환 부호화를 위한 새로운 변환 부호화기를 제안하였다. 비트율 감축을 위하여 기존의 재양자화 기법이 많이 이용되었으나 입력 영상의 비트율과 목적 비트율의 차이가 큰 경우 양자화 크기의 증가로 인한 화질 열화가 심해지므로 충분한 비트율 감축을 할 수 없다. 따라서 시·공간적 해상도 감축이 필요하며 본 연구에서는 시·공간적 해상도 감축에 따른 새로운 움직임 벡터 추정 및 정제 방법을 제안하였다. 제안한 움직임 벡터 추정 방법은 시간적 해상도 감축을 위해 기존의 TVC 방법을 사용하며 공간적 해상도 감축을 위해 축소된 영상의 블록 복잡도를 이용하여 새로운 움직임 벡터를 추정한다. 이 방법은 수학적 방법을 기반으로 제안되었으며 경험적 방법을 기반으로 한 기존 추정 방법들과 화질 열화, 최적의 움직임 벡터와의 오차 및 출력 비트량 등을 비교하여 성능을 검증하였다. 제안한 정제 기법은 제안된 움직임 벡터 추정 방법에 의해 1차 추정된 움직임 벡터를 중심으로 영상의 상관관계를 이용하여 정제 범위를 적응적으로 선택하여 정제한다. 이 방법은 기존의 고정 범위에서의 전역 탐색 방법에 의한 정제 방법이 출력 영상의 화질은 좋으나 수행 연산량이 많은 단점을 보완하여 좋은 화질과 적은 연산량으로 정제를 할 수 있도록 제안하였다. 실험을 통해 기존 방법과 화질 열화, 출력 비트량 및 수행 연산량을 비교하여 성능을 평가하였다. 제안된 움직임 벡터 추정 방법에 의해 변환 부호화를 수행한 결과 출력 영상의 화질은 전역 탐색에 의해 변환 부호화를 수행했을 때의 화질과 평균적으로 1dB 이내로 근접했으며 기존 움직임 벡터 추정 방법들보다 더 좋은 화질을 보였다. 또한 가장 작은 SAD를 보였다. 전역 탐색에 의해 추정된 움직임 벡터 사이와의 오차는 움직임이 빠른 영상과 느린 영상에서 모두 기존 추정 방법들보다 더 작게 나와 더 우수한 성능을 보임을 알 수 있었다. 출력 비트율은 기존 방법들보다 더 낮은 비트율을 보였으며 종속적 변환 부호화에 의한 출력 영상의 비트율과 더 근접하였다. 제안된 정제 방법에 의해 정제를 수행한 결과 ±2 화소 범위에서의 전역 탐색에 의한 정제 방법과 화질 차이가 거의 발생하지 않은 반면 연산량은 80% 이상이 감소하였다. 출력 비트량은 ±2 화소 범위에서의 전역 탐색에 의한 정제 방법과 거의 같은 비트량을 보였다. 따라서 제안된 변환 부호화기는 기존 방법들보다 화질 열화와 연산량은 작으면서도 비트율을 효율적으로 낮출 수 있음을 알 수 있다. This thesis proposes a new transcoder for altering pre-encoded incoming bit streams into lower bit rate. The simple re-quantization transcoding technique has been used to reduce bit rate. However if there is a great difference between input and target bit rate it can not reduce enough bit rate because the quality of the video sequence is decreased by increasing the quantization factor. Therefore in this study new motion vector re-estimation and refinement method are proposed for the temporal and spatial resolution reduction. The proposed motion vector re-estimation method utilizes the complexity of the reference block to reduce spatial resolution with TVC that is the existing method to reduce temporal resolution. This method is based on mathematical derivation and compared with previous ones. The proposed motion vector refinement method is to refine the incoming motion vector with adaptive selection of the search range according to the correlation of the sequence. The existing method by full-search in the fixed range can obtain the best quality of the sequence but needs many operations. Therefore in this study new motion vector refinement method is proposed that it is closer to optimal quality than those of previous method but needs small operations. This method is compared with the existing one through experiment. In simulation results presented in this thesis, the difference of reconstructed sequence quality between the proposed motion vector re-estimation method and full-search motion estimation is less than 1dB and the average sum of absolute difference (SAD) per macroblock is the smallest. The error between motion vectors estimated by the proposed and full-search method is smaller than one of previous methods at all sequences that include fast and slow movement. The bit rate of sequence transcoded by the proposed method is lower than one of previous methods and closer to one of cascaded transcoding. Though the quality of outgoing sequence refined by the proposed refinement method and full-search in ±2 pixels don't almost make a difference, the amount of operation is reduced more than 80 percentage. In case of comparing bit rate of outgoing sequence, two methods make little dfference. Therefore it can be observed through experiment that the performance of the proposed transcoder is much superior than one of previous methods in transcoding to lower bit rate.
Anterior thalamic nucleus stimulation for refractory epilepsy : a single center experience
Background Recent study suggests that refractory epilepsy patients treated with deep brain stimulation (DBS) of the internal nucleus suggest a considerable anticonvulsant effect. We intended to describe the results of DBS on anterior thalamic nucleus (ATN) from our patients and to evaluate the long-term efficacy of DBS for controlling refractory epilepsy. Methods. We retrospectively reviewed the medical records of 7 patients with refractory epilepsy who were treated with ATN DBS between 2004 and 2015. Seizure frequency was evaluated with daily seizure diary compared with pre-operative baseline data. Results The mean reduction rate in seizure frequency at 2 year was 72.2%, and 76.9% at the time of the last outpatient clinic follow up. There was no complication except one patient with transient numbness on right arm. Conclusion Long-term ATN DBS was confirmed to be associated with sustained seizure reduction, and even when the DBS is turned off, the effect seems to continue. Further controlled studies in larger patient series are warranted to increase the knowledge about antiepileptic effects of DBS. 연구배경. 난치성 뇌전증의 치료에 있어 뇌심부자극술이 주목할만한 항경련 효과를 나타낸다고 여러 연구들에서 보고하고 있다. 이번 연구를 통해 난치성 뇌전증에 대해 시상전핵 자극술을 시행한 환자들의 결과를 살펴보고 장기적인 효용성에 대해 논하고자 한다. 연구방법. 2004년부터 2015년까지 본원에서 시상전핵자극술로 치료받은 난치성 뇌전증 환자 7명을 대상으로 하였다. 장기간의 추적관찰 의무기록을 확인해 수술 전후의 경련발작 빈도를 비교하여 평가하였다 연구결과. 2년 시점에서의 평균 경련 빈도 감소율은 72.2%였고, 마지막 외래 추적관찰 시점에서는 76.9%를 보였다. 한 환자에서의 일시적인 오른팔의 감각저하 외에는 보고된 합병증은 없었다. 결론. 시상전핵 자극술을 통한 난치성 뇌전증의 치료는 장기간의 추적 관찰시에도 저명한 부작용 없이 효과적으로 작용함을 확인할 수 있었다. 추가로 자극이 꺼진 상태에서도 효과가 지속되는 것으로 추정된다. 뇌심부 자극술의 장기적인 항경련효과에 대해 앞으로도 지속적인 대규모 연구가 필요할 것이다.
지역활성화사업에 영향을 미치는 요인 분석 : 로컬거버넌스 관점에서
유희준 서울대학교 행정대학원 2014 국내석사
본 연구의 목적은 오늘날 활발하게 시행되고 있는 지역활성화사업에 긍정적인 영향을 미치는 요인을 정부의 역할에 중점을 두어 분석해보고자 한다. 기존의 연구들은 지역활성화사업에 있어 적극적인 주민참여가 중요한 요인임을 강조해왔다. 하지만 본 연구자는 지역활성화사업에 있어 주민참여의 중요성에 대해 충분히 인지되고 있음에도, 실제로 주민참여가 제대로 이루어지지 않는 원인을 지역활성화사업 초기단계에서 정부가 주민들이 참여할 수 있는 통로를 확보하고 지속될 수 있는 기반을 마련하지 않았기 때문이라고 본다. 즉, 지역활성화사업에 있어 사업의 초기단계에 정부에게 기대되는 역할은 무엇인지 알아보고자 한다. 연구 문제에 답하기 위해 비슷한 시기에 형성되었으나 2014년 현재, 지속과 중단이라는 결과적 차이를 가져온 두 지역의 지역활성화사업을 비교사례대상으로 선정하여 분석해보고자 한다. 우선 이론 연구를 통해 국내외의 거버넌스 및 로컬거버넌스, 지역활성화사업에 대한 선행연구 등을 분석하고, 본 연구의 분석 기준이 될 로컬거버넌스 성과에 영향을 미친 요인에 대해 조사하였다. 로컬거버넌스 성과에 영향을 미친 요인을 기준을 분석틀로 설정하여 사례분석을 하는 데 보다 객관적이고 명확한 결과를 나타내고자 하였다. 본 연구의 비교대상인 부산 감촌문화마을과 신수동 행복마을 주식회사의 추진배경, 집행과정, 참여자, 특성 등에 대해 사례 조사를 하기 위해 심도있는 문헌조사와 심층면접 및 현장답사를 통해 연구분석을 진행하였다. 지역활성화사업에서 정부에게 기대되는 역할에 관한 연구의 결과는 다음과 같다. 첫째, 지속사례의 경우 사업의 본격적인 시행에 앞서 파일럿시험과 유사하게 마을미술프로젝트를 통해 사업 참여자들에게 사업의 내용 숙지 및 사업 목표에 대한 충분한 합의를 이끌어 낼 수 있었다. 또한 정부는 다양한 교육 및 자문 기회를 제공하여 민간구성원과 정부와의 목표와 참여자 간 이해도를 향상시키며 정부 외 참여자들이 자립적으로 활동할 수 있는 기반을 구축해 나아가고 있다. 반면에 중단사례는 사업의 내용 숙지 및 공통된 목표의 합의에 실패하였으며, 교육 및 자문의 기회가 주어졌음에도 민간구성원들의 참여율 저조로 사업 이해도 증진 및 단일한 목표 형성에 보탬이 되지 못 하였다. 둘째로, 지속사례는 정부가 법적·제도적 지원, 교육·자문 지원, 재정적 지원 등 다방면에서 사업에 적극적인 지원함에 따라 정부 외 참여자들의 의지 독려 및 책임성을 부여하며 참여자들이 사업에 대한 주인의식을 지닐 수 있도록 시스템을 구축해 나아가고 있다. 중단사례의 경우 법적인 제재 및 제도적 지원의 부족으로 사업에 타격을 주며 정부 외 참여자들이 주인의식을 지니고 자발적인 참여를 할 수 있는 환경 조성에 실패하였다. 본 연구는 지역활성화사업의 발전을 위해 다음과 같은 방안을 제시하고자 한다. 첫째, 지역활성화사업 초기단계에서는 정부주도형으로 사업을 진행해야 할 필요가 있다. 이는 기존의 관주도형 집행과는 다른 의미로, 행정 및 경영 측면에서 타 사업 참여자에 비해 전문적인 정부가 사업초기단계에서 보다 주도적으로 사업을 집행하여 다른 사업 참여자들의 능력을 양성하여 후에 자립적인 주체로서 사업에 적극적으로 참여할 수 있는 기반을 장려해야한다는 것을 의미한다. 둘째, 지역 특성을 이해한 지역활성화사업이 시행되어야 한다. 주민들이 거주하는 지역을 대상으로 하는 사업이기에 지역 특성에 대한 깊이있는 이해는 사업의 대상인 지역과 지역주민들과의 상호협력을 하는 데 매우 긍정적인 역할을 한다. 셋째로, 장기적인 관점에서 지역활성화사업을 시행해야한다. 지역활성화사업에서뿐만 아니라 대부분의 급진적인 사업 진행은 갈등을 초래하고 만족도를 저하시키게 된다. 여러 지역주민들이 참여하며 그들의 다양한 의견이 반영된 사업을 시행하기 위해서는 장기적인 관점에서 지역활성화사업을 진행해야 한다.
Functional Nano-Carbon Hybrid Materials for the Energy Storage Device
유희준 성균관대학교 대학원 2015 국내박사
Today, the technologies on energy generation and storage are very important issue for humans, and continuously developments and studies for superior technologies have been strongly demanded. On these technologies, the novel materials design and characterization of performance should be importantly carried out, and they are decisive factor for the energy generation and storage technologies. On the other hand, the carbon-based nanomaterials based on graphene and carbon-nanotube have been received a great deal of attention as the key material for the energy storage device and in the various science and industry fields. These nano-carbons composed with single layered carbon structure of sp2-bonded carbon atoms, has good physical and chemical properties. In additionally, nano-carbon has high surface area and active sites, they can be act as excellent host materials. Owing to their unique properties, nano-carbons have been successfully utilized and adopted for various applications like nano-electronics, energy storage materials, sensing, and polymer composite materials. In addition, nano-carbon is very recommended materials for advanced energy storage materials because of its nature abundance, low density, low cost, and green material. This thesis carry out the study on nano-carbon composite for the energy storage device, representatively, electric double layer capacitor for high power applications on first part and lithium ion batteries for high energy applications on the second part. In the first chapter, we designed new procedure for the nitrogen doped porous graphene. The highly winkled and porous nitrogen doped reduced graphene oxide (NrGO) is prepared through a simple microwave irradiation reaction from graphene oxide (GO) and ammonium hydroxide (NH4OH). Microwave irradiation reaction with solvent assisted bubbling nitrogen source facilitates a safe-gram scale, nitrogen doped and porous reduced graphene oxide (rGO). The nitrogen doped amount and surface area of NrGO is increased as the reaction ratio of NH4OH. The highly nitrogen doped and porous NrGO exhibits superior capacitance performance. This chapter newly suggests effective mass-producible nitrogen doping porous graphene flake through simple microwave reaction. In the second chapter, we demonstrate a low resistant and high volumetric on-chip type solid-state supercapacitor (SSC) using hydrophilic surface modified multi-walled CNTs (MWCNTs) and reduced graphene oxides (RGOs). The hydrophilic surface modified carbon electrode is expected to show a good electrolyte affinity and a homogenous dispersibility in water, resulting in the low resistance and the uniform dense electrode to give high volumetric capacity. Especially, for the good accessibility of electrolyte into the carbon-based electrode, we carefully designed the surface modified MWCNTs with a hydrophilic sulfonate groups (R-SO3-), which allow a hydrophilic surface of the outer carbon nanotube, while keeping high electric conductivity through inner carbon nanotube. Different from previous results, this hydrophilic carbon composite film electrodes exhibit much lower series resistance and simultaneously lower charge-transfer resistance despite its high dense structure (over 0.9 g cm-3). The hydrophilic surface modified carbon electrode shows a good electrolyte affinity with homogeneous dispersibility in water, resulting in low ion-transfer resistance and a uniform and dense electrode to give a high volumetric capacitor. The hydrophilic carbon electrode exhibits a superior capacitance (58 F cm-3, 99.3 mF cm-2) and is stable up to 5000 cycles. In the third chapter, an efficient and scalable process applicable for mass production was developed to synthesize non-aggregated MoS2-intercalated three-dimensional (3D)-nanostructured graphite based on stress induced and microwave irradiation techniques in which exfoliated graphite, sulfur, and molybdenum chloride were used as the starting materials. X-ray diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy analysis demonstrated that the as-synthesized materials consisted of MoS2-intercalated 3D hybrid-nanostructured graphite platelets that had a multiply repeated MoS2/graphite/MoS2 structure. The obtained MoS2-graphites powder surpasses MoS2 as an anode material in terms of specific capacity, cycle stability, and rate performances at high current densities for Li-ion batteries. The electrochemical impedance spectroscopy demonstrated that the graphite sheets not just reduced the contact resistance in the electrode but also facilitated electron transfer in the lithiation/delithiation processes. The superior electrochemical performances of the as-synthesized MoS2-intercalated 3D-nanostructured graphite can be ascribed to its hybrid 3D architecture and synergetic effects between the layered MoS2 and graphite sheets. In the fourth chapter, we carried out a new unique synthesis method to produce a new type of hybrid nanostructure of MoS2-CNTs composites. We developed a novel strategy for the synthesis of cylindrical MoS2 directly grown on CNT composites without the use of any other additives, exhibiting super electrochemical performances as the anode material of lithium ion batteries via a microwave irradiation technique. We adopt a simple, step-by-step method: sulfur coating on CNTs and then reaction with a Mo source to synthesize hybrid cylindrical nanostructures of the MoS2-CNT composite. X-ray diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy analyses demonstrated that the as-synthesized MoS2-CNTs possessed a hybrid nanostructure in which MoS2 sheets were well attached to the CNTs. The directly attached MoS2 sheets on the CNTs showed superior electrochemical performance for anode materials of a lithium ion battery.