http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유정현(Junghyun Yoo),윤성운(Sungwoon Yoon),박인명(Inmyung Park),기태경(Tae Kyung Ki) 대한기계학회 2022 대한기계학회 춘추학술대회 Vol.2022 No.11
A main Terminal box (TBx) for Korean heavy ion accelerator is a facility to connect between two coldboxes and two linear accelerators (LINACs). There are four main roles for TBx; i) cooling and warming up main cryolines in LINACs, ii) checking and controlling the conditions of suppling and recovered Helium to/from LINACs, iii) Separating between two coldboxes and two LINACs, iv) protecting main cryolines in LINACs. We finally finish the construction of TBx which can perform these four roles. In this paper, we mainly discuss about conceptual design and hardware of TBx.
전기설비 원격감시시스템 활성화를 위한 시스템 신뢰성 검증실험
유정현(Junghyun Yoo),권종원(Jongwon Kwon),김희식(Hiesik Kim),김규식(Gyusik Kim),김조천(Jochun Kim) 대한전기학회 2010 정보 및 제어 심포지엄 논문집 Vol.2010 No.10
국내의 건물 화재발생 건수 중 전기화재 비중이 20% 이상으로 연구조사 분석결과 나타나고 있다. 이는 다른 국가에 비해 전기누전, 전기발열 등의 원인으로 전기화재가 상대적으로 높게 나타나고 있어, 실시간 전기안전점검과 누설전류검사 및 과전류 센서 모니터링 시스템 적용이 필요하다. 이에 따라 국내 전기화재율 감소를 위한 대책마련이 시급하다. 이를 위해 최근 정부 주도로 전력산업과 정보통신사업이 컨버전스된 전기안전관리 원격감시시스템 연구개발이 활발히 이루어지고 있다. 하지만 기술적으로 원격전기안전관리 시스템의 완벽성이 부족하고 관리비용 분담 문제, 안전관리대행 법정가중치 조정 등 제도적인 문제로 현재의 전기사업법에 대한 재정비 중이다. 본 논문에서는 전력IT 기술을 접목한 국내 전기안전관리 원격감시시스템 도입 및 운영을 위해 국내 전기안전관리 제도 개선에 부합할 수 있는 시스템의 신뢰성 검증실험을 수행하고 새로운 원격전기안전점검 시스템의 상세모델을 제시하였다.
유정현(Junghyun Yoo),윤성운(Sungwoon Yoon),박인명(Inmyung Park),기태경(Tae Kyung Ki) 대한기계학회 2022 대한기계학회 춘추학술대회 Vol.2022 No.11
A main Terminal box (TBx) for Korean heavy ion accelerator is a facility to connect between two coldboxes and two linear accelerators (LINACs). There are four main roles for TBx; i) cooling and warming up main cryolines in LINACs, ii) checking and controlling the conditions of suppling and recovered Helium to/from LINACs, iii) Separating between two coldboxes and two LINACs, iv) protecting main cryolines in LINACs. We finally finish the construction of TBx which can perform these four roles. In this paper, we mainly discuss about conceptual design and hardware of TBx.
유정현(Junghyun Yoo),손경호(Kyungho Son),이완석(Wan S. Yi),곽진(Jin Kwak) 한국정보보호학회 2009 情報保護學會誌 Vol.19 No.1
최근 정보보호의 중요성이 부각됨에 따라 보안성이 검증된 정보보호 제품/서비스에 대한 선호도가 높아지고 있다. 또한 보안성 평가로 검증된 정보보호 제품/서비스의 보안 기능에 대한 안전성과 신뢰성을 보증하기 위해서 보안검증표시 스킴의 필요성이 증대되고 있다. 이에 따라 본 고에서는 영국의 보안검증표시 스킴에서 규정하는 보안검증표시 스킴의 체계, 절차, 검증 제품에 대해서 분석하고자 한다.
유정현(Junghyun Yoo),윤성운(Sungwoon Yoon),김덕기(Duckgi Kim),김동완(Dongwan Kim),기태경(Taekyung Ki) 대한기계학회 2023 대한기계학회 춘추학술대회 Vol.2023 No.11
SCL3 cryogenic plant had short maintenance period from July 2023 to September 2023. We filled oil for helium compressors, cleaned several filters including inlet filter of cryogenic turbine, inspected pressure safety valves based on KGS regulation and so on. We finally conducted helium conditioning for contaminated location by air. The items for maintenance were decided based on our operation experience for one year. In this paper, the detail of items, issues during maintenance and the result of maintenance will be discussed.
액체 질소 이하 온도에서 작동하는 능동형 자기 재생식 냉각기의 개발
박인명(Inmyong Park),유정현(Junghyun Yoo),정상권(Sangkwon Jeong) 대한설비공학회 2017 대한설비공학회 학술발표대회논문집 Vol.2017 No.6
능동형 자기 재생식 냉동기는 대상을 냉각시키는 데 자성 물질의 자기열량효과를 이용한다. 이 효과는 가역과정이기 때문에 효율적인 측면에서 큰 잠재력을 지니고 있다. 또한 저온에서 기계적인 움직임이 없기 때문에 내구성이 우수한 시스템을 구현할 수 있다. 본 연구에서는 액체질소 온도 이하에서 작동하는 능동형 자기 재생식 냉동기를 구성하였고 성능을 시험하였다. 실험장치는 크게 능동형 자기 재생기, 자기장을 인가하는 고온초전도자석, 작동유체의 질량유량을 발생시키는 왕복유동장치로 구성되어 있다. 재생기의 고온부를 77 K으로 유지시켰을 때 저온부의 온도가 자기열량효과에 의하여 서서히 감소하면서 냉각 되는 것을 확인하였고 최대 45 K의 온도차이를 발생시켰다.
데스크탑 PC용 CPU 냉각 시스템 최적화를 위한 수치해석 연구
최지훈(Jeehoon Choi),유정현(Junghyun Yoo),서민환(Minwhan Seo),강신재(Shinjae Kang),김철주(Chulju Kim) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.11
The increasing demands for the recently released CPU which has had higher heat density, the confined space of desktop PCs, and so on are the main drive for continuously improving PC cooling systems. In order to meet number of demands, this paper describes the flow and thermal behavior of the heat sink combined with heat pipes, and a fan through the numerical analysis by using the computational fluid dynamics(CFD) code and discusses how to extend the cooling capability.
최지훈(Jeehoon Choi),유정현(Junghyun Yoo),서민환(Minwhan Seo),강신재(Shinjae Kang),김철주(Chulju Kim) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
The high performance CPUs have been developed to satisfy the extensive data and graphic processing requirements. At the same time, the necessity of thermal management for the CPUs is also becoming significant. The active cooling technology as a heat sink to combine with a fan and heat pipes has been widely used in the desktop PC markets. However, the increased heat dissipation and higher heat density is even required to optimize that cooling technology under the limitation of overall volume, weigh, and acoustic noise. For the optimal design, this paper discusses the flow and thermal behavior in the cooling equipment for desktop PC CPUs by using CFO code how to extend the air cooling capability and maximize its performance
Sintered Metal Wicks Development for the High Performance Loop Heat Pipe(LHP) Systems
최지훈(Jeehoon Choi),성병호(Byungho Sung),유정현(Junghyun Yoo),서민환(Minwhan Seo),김철주(Chulju Kim) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.5
The Loop Heat Pipe(LHP) system uses capillary forces so as to pump the working fluid from heat acquisition to heat rejecting systems. The performance of the LHP systems depends mainly upon the operating performance of the wick structure. The capillary pressure increases with decreasing the pore size of the wick structure. By the way, the wick structure's permeability decreases with decreasing the pore size and the porosity. To obtain an ideal wick, the wick structure should possess several characteristics such as the small pore size, high porosity and chemical compatibility with working fluid. Sintered metal wicks have been mainly used as the capillary wick structure mounted in LHP because of the fact that the sintered metal wick has some advantages like convenient selection of wick material, smaller pore size and so on as well as high reliability. In this study, sintered metal wicks were developed to meet required several parameters to design the high performance LHP systems for obtaining even more effective cooling technologies.