http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수세용 타월의 습윤 인장강도 분석을 통한 한국산업표준 개정
유원재 ( Won-jae Youe ),유선화 ( Sun-hwa Ryu ),이태주 ( Taiju Lee ),박주생 ( Joo-saeng Park ) 한국목재공학회 2022 한국목재공학회 학술발표논문집 Vol.2022 No.2
본 연구에서는 위생용지 시장이 확대되고 소비자들의 위생용지에 대한 관심이 증가함에 따라 시중에 유통되고 있는 종이 타월의 품질을 분석하고 현재 한국산업표준으로 제정된 수세용 타월(KS M 7710)의 품질기준 중 습윤 인장강도의 합리적 기준에 대한 개정안을 제안하고자 한다.
Organosolv 전처리를 통한 리기다소나무의 바이오에탄올 생산 적용성 평가
유원재(Won-Jae Youe),김용식(Yong Sik Kim),강규영(Kyu-Young Kang) 한국펄프·종이공학회 2015 펄프.종이기술 Vol.47 No.4
In this study, the feasibility of utilizing wood chips from pitch pine (Pinus rigida) was evaluated for bioethanol production by an organosolv pretreatment and enzymatic saccharification. When wood chips from pitch wood were pretreated with 75% (v/v) ethanol and 1.7% sulfuric acid as a catalyst at H-factor 2000, average pulp yield was 43.3%, which pretreated wood fibers showed higher glucan (55.8%) and lower lignin (12.2%) contents than untreated control (43.9% glucan and 27.8% lignin). After enzymatic saccharification, the organosolv pulps with 56.2% delignification rate reached above 97% conversion rate of cellulose to glucose. These results indicated that increasing the delignification rate causes micro pores on the surface of organosolv pulps resulting in improved the accessibility of enzyme onto the substrate. Moreover, it was in agreement with the SEM examination of wood fibers.
미세먼지 제거용 필터 제조를 위한 나노셀룰로오스 다공구조체
유원재 ( Won-jae Youe ),박지수 ( Ji-soo Park ),안병준 ( Byoung-Jun Ahn ),권재경 ( Jaegyoung Gwon ) 한국목재공학회 2021 한국목재공학회 학술발표논문집 Vol.2021 No.2
기존 보건용 마스크나 공기청정용 에어필터 소재의 고분자 소재를 대체할 수 있는 생분해성 나노셀룰로오스 기반 에어필터를 제조하고자 하였다. Nippon paper chemicals Co., Ltd.(Japan)에서 정제된 셀룰로오스 파우더를 구입하여 기계적 처리를 통해 나노셀룰로오스를 제조하였다. 미세먼지를 거를 수 있는 다공구조체 제조를 위해 진공여과방식을 적용하였으며 나노섬유의 뭉침현상 억제와 다공구조 형성 유도를 위해 유기용매 혼합 및 무기입자 첨가량을 조절하여 나노셀룰로오스 기반 에어필터의 다공구조를 제어하고자 하였다. 제조된 에어필터의 형태학적 특성은 주자전자현미경을 통해 확인하였으며, 상용 필터(KF94) 대비 미세입자 제거효율 분석은 별도로 제작한 수직 풍동형 필터 성능 시험기를 이용하여 분석하였다. 나노셀룰로오스 현탁액의 진공여과시 유기용매의 혼합은 나노섬유의 뭉침현상을 감소시킬 수 있는 것으로 확인되었다. 또한, 나노셀룰로오스 현탁액 내 무기입자의 첨가를 통해 에어필터의 다공구조 형성을 유도할 수 있었으며, PM2.5 이하 미세입자를 약 80% 이상 제거 가능한 것으로 나타났다.
수세용 타월의 습윤 인장강도 분석을 통한 한국산업표준 개정
유원재 ( Won-jae Youe ),유선화 ( Sun-hwa Ryu ),이태주 ( Taiju Lee ),박주생 ( Joo-saeng Park ) 한국목재공학회 2022 한국목재공학회 학술발표논문집 Vol.2022 No.2
본 연구에서는 위생용지 시장이 확대되고 소비자들의 위생용지에 대한 관심이 증가함에 따라 시중에 유통되고 있는 종이 타월의 품질을 분석하고 현재 한국산업표준으로 제정된 수세용 타월(KS M 7710)의 품질기준 중 습윤 인장강도의 합리적 기준에 대한 개정안을 제안하고자 한다.
유원재 ( Won-jae Youe ),이수민 ( Soo-min Lee ),이성숙 ( Sung-suk Lee ),김용식 ( Yong Sik Kim ) 한국목재공학회 2016 목재공학 Vol.44 No.3
본 연구에서는 리그닌 기반 폴리아크릴로나이트릴(polyacrylonitrile, PAN) 공중합체를 전기방사하여 나노탄소섬유매트를 제조한 다음, 에폭시 수지를 보강하여 제조한 복합재료의 열적 특성 및 기계적 강도를 조사하였다. 나노탄소섬유 매트/에폭시 복합재는 에폭시 수지와 유사한 열분해 거동을 보이고 있는 반면에 유리전이온도는 106.9℃로 순수에폭시 수지의 유리전이온도(Tg) 90.7℃보다 다소 높은 경향으로 나타나 열적 안정성이 향상된 결과로 사료된다. 리그닌 기반 공중합체 및 순수 PAN으로 만든 나노탄소섬유 매트의 인장강도는 각각 7.2 및 9.4 MPa로 나타났으며, 리그닌 기반 나노탄소섬유 매트/에폭시 복합재료의 인장강도는 43.0 MPa로 나타났다. 이는 나노탄소섬유 매트/에폭시 복합재료에서 에폭시 수지 매트릭스(matrix) 내에서 나노탄소섬유가 강화제(reinforcing filler)로 작용한 효과로 약 6배의 인장강도 향상을 보였다. 인장강도 측정 후 시편의 절단면에서 나노탄소섬유 자체의 높은 인장강도(478.8 MPa) 및 에폭시 수지와의 약한 계면접착성에 기인하는 나노섬유의 뽑힘현상이 관찰되었다. The lignin-based carbon nanofiber reinforced epoxy composite has been prepared by immersing carbon nanofiber mat in epoxy resin solution in order to evaluate the physical and mechanical properties. The thermal and mechanical properties of the carbon nanofiber reinforced epoxy composite were analyzed using thermogravimetric analysis (TGA), differential scanning calorimeter (DSC) and tensile tester. It was found that the thermal properties of the carbon nanofiber reinforced epoxy composite improved, with its glass-transition temperature (Tg) increased from 90.7℃ (Tg of epoxy resin itself) to 106.9℃. The tensile strengths of carbon nanofiber mats made from both lignin-g-PAN copolymer and PAN were 7.2 MPa and 9.4 MPa, respectively. The resulting tensile strength of lignin-based carbon nanofiber reinforced epoxy composite became 43.0 MPa, the six times higher than that of lignin-based carbon nanofiber mats. The carbon nanofibers were pulled out after the tensile test of the carbon nanofiber reinforced epoxy composite due to high tensile strength (478.8 MPa) of an individual carbon nanofiber itself as well as low interfacial adhesion between fibers and matrices, confirmed by the SEM analysis.
DAF(Data Asset Framework)를 활용한 임산공학 분야 연구자들의 연구데이터 관리 개선 방안 - 국립산림과학원을 중심으로 -
김주섭,한연중,유원재,전예린,김선태,Kim, Juseop,Han, Yeonjung,Youe, Won-Jae,Jeon, Yerin,Kim, Suntae 한국도서관정보학회 2020 한국도서관정보학회지 Vol.51 No.2
본 연구는 임산공학 연구자들의 연구데이터 관리 현황 파악을 목적으로 하였다. 연구 목적 달성을 위해 DAF(Data Asset Framework)라는 도구를 이용하여 설문조사를 수행하였다. DAF는 기관이 연구데이터를 어떻게 관리하고 있는지 식별, 위치, 설명 및 평가할 수 있는 수단을 제공하는 조사 도구이다. 이러한 DAF를 활용하여 국립산림과학원 내 임산공학 분야 연구자들을 대상으로 연구데이터 관리 현황을 분석한 결과, 연구데이터 생성방법 및 유형, 공유, 저장, 보존 그리고 재사용 등과 같은 5가지의 카테고리의 현황 및 문제점이 도출되었으며, 또한 문제점 관련하여 해결책을 제시하였다. 이번 연구는 DAF와 같은 체계적인 도구를 활용한 기초 조사로서 특정 분야의 RDM 시스템 설계 시 연구데이터의 현황 및 문제점을 분석하는데 참고자료가 될 수 있을 것이다. This study was started with the aim of grasping the current status of research data management of forestry engineering researchers. In order to achieve the research purpose, the survey was conducted using a tool called DAF (Data Asset Framework). DAF is an investigative tool that provides a means to identify, position, describe and evaluate how the agency manages research data. Using this DAF, the research data management status was analyzed for researchers in the field of forestry engineering at the National Institute of Forest Science. As a result of analysis, the current status and problems of the five categories such as the method and type of research data creation, sharing, storage, preservation, and reuse were identified, and solutions were presented in relation to the problems. This study is a basic investigation using a systematic tool such as DAF, and can be used as a reference for analyzing the current status and problems of research data when designing RDM system in a specific field.
백소라(So-Ra Back),유원재(Won-Jae Youe),이태주(Tae-Ju Lee),김형진(Hyoung-Jin Kim) 한국펄프·종이공학회 2018 펄프.종이기술 Vol.50 No.5
In this paper, applicability of biodegradable polymers which could replace the paraffin wax was studied in order to provide the water resistance and biodegradability to corrugated boxes. Optimum blending ratio based on paraffin wax was found by measuring sizing degree and paper strength. As a result, when PVA (polyvinyl alcohol) and SC (sodium caseinate) were blended 20% with paraffin wax, the highest water resistance was observed. In case of paper coated with PVA and paraffin wax, the compression strength (ring crush test) of the coated paper was 1200 N/m higher than that of base paper. Stability of the coated paper was also analyzed under cold temperature (-25℃). All strength of properties of the coated papers decreased for prolonged exposure time at -25℃. Nevertheless strength of the coated paper was still higher than that of base paper after exposure under cold condition. Consequently, it could be considered that eco-friendly coating resin prepared by blending paraffin wax and PVA would be possible for application to corrugated box to be distributed under cold temperature.