http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
선택적 비트 플레인 부호화를 이용한 오디오 주파수 계수의 무손실 부호화 기술
유승관,박호종,오승준,안창범,심동규,백승권,강경옥,Yoo, Seung-Kwan,Park, Ho-Chong,Oh, Seoung-Jun,Ahn, Chang-Beom,Sim, Dong-Gyu,Beak, Seung-Kwon,Kang, Kyoung-Ok 한국음향학회 2008 韓國音響學會誌 Vol.27 No.1
본 논문에서는 오디오 부호화기의 양자화 된 주파수 계수 인덱스를 무손실 부호화 하는 새로운 방법을 제안한다. 기존의 무손실 부호화기는 계수의 통계적 특성을 이용하여 허프만 부호화 하고 있으나 간단한 구조로 인하여 최고의 성능을 제공하지 못한다. 본 논문에서는 비트 플레인 변환과 런렝스 부호화 기술을 사용하여 성능이 향상된 새로운 주파수 계수의 무손실 부호화 기술을 제안한다. 제안하는 방법은 주파수 계수의 양자화 인덱스를 비트 플레인 변환을 거쳐 상관도가 높은 1차원 비트열로 변환하고 이를 런렝스 부호화 하고 최종적으로 런렝스 심볼을 허프만 부호화 한다. 또한 주파수 대역을 크게 3개의 구역으로 나누고 각 구역에서 비트 플레인 부호화 방법을 선택적으로 사용하도록 하여 성능을 추가로 향상시킨다. 제안한 무손실 부호화 성능을 엔트로피에 의한 이론적 비트 수로 측정하면 기존의 AAC 무손실 부호화에 비하여 최대 6% 성능 향상을 제공한다. In this paper, new lossless coding method of spectral coefficients for audio codec is proposed. Conventional lossless coder uses Huffman coding utilizing the statistical characteristics of spectral coefficients, but does not provide the high coding efficiency due to its simple structure. To solve this limitation, new lossless coding scheme with better performance is proposed that consists of bit-plane transform and run-length coding. In the proposed scheme, the spectral coefficients are first transformed by bit-plane into 1-D bit-stream with better correlative properties, which is then coded intorun-length and is finally Huffman coded. In addition, the coding performance is further increased by applying the proposed bit-plane coding selectively to each group, after the entire frequency is divided into 3 groups. The performance of proposed coding scheme is measured in terms of theoretical number of bits based on the entropy, and shows at most 6% enhancement compared to that of conventional lossless coder used in AAC audio codec.
알칼리 흡수제의 탄산화반응을 이용한 고농도 CO<sub>2</sub> 포집특성
김병환 ( Byung-hwan Kim ),강필선 ( Pil-sun Kang ),유승관 ( Seung-kwan Yoo ) 한국폐기물자원순환학회(구 한국폐기물학회) 2016 한국폐기물자원순환학회지 Vol.33 No.3
Mineral carbonation is one of the safest permanent carbon dioxide sequestration methods. Carbon Capture & Utilization (CCU) is a process that utilizes available resources by removing carbon dioxide in a method of mineral carbonation. It can be applied to industries producing high carbon dioxide emissions. This study aims to investigate the absorption performance of carbon dioxide at high concentrations. Calcium hydroxide suspension was used as an absorbent. In addition, NaOH and Mg(OH)<sub>2</sub> were used as additives. Carbon dioxide removal efficiency with NaOH increased from 30% to 90% when the additive amount was increased from 1wt% to 3wt%. In the case of Mg(OH)<sub>2</sub>, carbon dioxide absorption efficiency was minimal regardless of the additive amount. In addition, the solid byproducts werec onfirmed by X-ray diffraction spectra and SEM images.
박종진(Jong-Jin Park),앙꿀가르(Ankur Gaur),송호준(Ho-Jun Song),유승관(Seung-kwan Yoo),박진원(Jin-Won Park) 한국청정기술학회 2007 청정기술 Vol.13 No.3
본 연구에서는 셀룰로오스계 부직포를 이용하여 상온에서 물에 녹는 카르복시메틸셀룰로오스(carboxymethylcellulose; CMC)를 합성하였다. 실험변수는 반응온도, 시간, 수산화나트륨(NaOH) 및 모노클로로아세트산(monochloroacetic acid; MCA)이다. 머서화(mercerization) 및 에테르화(etherification)할 때, 용해도와 치환도(degree of substitution ; DS)는 NaOH(또는, MCA)농도를 증가시키면서 최대 용해도와 치환도를 관찰하였다. 이때의 최대용해도와 치환도는 NaOH(또는, MCA)농도가 30%일 때 얻어졌다. 치환도를 볼 때, MCA농도의 영향은 NaOH농도에 비해 더 크게 나타났다. CMC섬유의 인장강도(Tensile strength; TS)에서는 효과적인 결과를 보였고, 반응시간, 시약농도와 반응온도에 따라 인장강도는 감소하였다. 그러나 인장 강도의 큰 변화가 중성영역 부근에서 관찰되었다. Carboxymethylcellulose (CMC), which is water-soluble at room temperature, was synthesized from cellulose in this study. Experimental parameters included reaction temperature, time, concentration of NaOH, and monochloroacetic acid (MCA). In mercerization and etherification, solubility and degree of substitution (DS) increased when NaOH (or MCA) concentration increased and maximum solubility and DS were achieved when NaOH or MCA was 30%. The effect of MCA concentrations on the DS was larger than that of the NaOH concentration. Tensile strength of the CMC was decreased by the increases of reaction time, reagent concentration and reaction temperature. Tensile strength also decreased by NaOH and MCA. However, low decrease of tensile strength was observed in near neutral region.