http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오지우,성병찬,Oh, Jiu,Seong, Byeongchan 한국통계학회 2022 응용통계연구 Vol.35 No.5
본 논문에서는 R에서 시계열 자료 예측을 위한 자동화 함수에 대하여 고찰하고 그 예측 성능을 비교합니다. 대표적인 시계열 예측 방법인 지수 평활 모형과 ARIMA (autoregressive integrated moving average) 모형을 대상으로 하였으며, 이들의 모형화 및 예측 자동화를 가능하게 하는 R의 4가지 자동화 함수인 forecast::ets(), forecast::auto.arima(), smooth::es()와 smooth::auto.ssarima()를 대상으로 하였습니다. 이들의 예측 성능을 비교하기 위하여 3,003가지의 시계열로 구성되어 있는 M3-Competition자료와 3가지의 정확성 척도를 사용하였습니다. 4가지 자동화 함수는 모형화의 다양성 및 편리성, 예측 정확도 및 실행 시간 등에서 각자 장단점이 있음을 확인하였습니다. In this paper, we investigate automatic functions for time series forecasting in R system and compare their performances. For the exponential smoothing models and ARIMA (autoregressive integrated moving average) models, we focus on the representative time series forecasting functions in R: forecast::ets(), forecast::auto.arima(), smooth::es() and smooth::auto.ssarima(). In order to compare their forecast performances, we use M3-Competiti on data consisting of 3,003 time series and adopt 3 accuracy measures. It is confirmed that each of the four automatic forecasting functions has strengths and weaknesses in the flexibility and convenience for time series modeling, forecasting accuracy, and execution time.
Polyaniline/Poly[1,2]bis-thio[1,8]-naphthylidine 복합체 고분자 양극재료의 합성과 전기화학적 특성
오지우,류광선,Oh, Ji-Woo,Ryu, Kwang-Sun 한국전기화학회 2012 한국전기화학회지 Vol.15 No.4
충 방전 전압범위와 용량이 다른 두 고분자물질을 복합체로 만들어 전극에 사용하여 다른 전기화학적 현상과 용량증대 효과에 대해 연구하였다. 상대적으로 전압은 높으나 용량이 적은 polyaniline(PANI)과 전압은 낮으나 용량이 큰 poly[1,2]bis-thio[1,8]-naphthylidine(PTND)을 사용하여 두 물질의 복합체를 합성하였다. 먼저 PTND 고분자를 합성하고, 얻어진 PTND 고분자 표면위에 PANI를 합성하였다. 합성여부와 미세구조를 FT-IR, XPS, FE-SEM 및 FE-TEM을 이용하여 분석하였으며, 순환전압 전류법 측정과 충 방전 용량측정을 통하여 리튬이차전지 고분자 양극 활물질로서 전기화학적 성능을 측정하였다. 상온, 1.3~4.0 V 전압구간에서 PANI/PTND 복합체의 1, 5 그리고 10 사이클 후 방전용량은 167 mAh/g, 90 mAh/g 그리고 81 mAh/g로 측정되었고, 이것은 PANI만 사용한 전극(80, 67, 62 mAh/g)에 비해 10사이클 후 약 30% 용량이 향상된 것이다. 50 사이클 이후 PANI/PTND 복합체의 방전용량은 67 mAh/g로 측정되었다. We studied the electrochemical phenomena and increase of capacity according to the polymer composite electrode of two different polymeric materials with different the voltage range and capacity. Polyaniline (PANI) with relatively high voltage and small capacity and poly [1,2] bis-thio[1,8]-naphthylidine (PTND) with slightly low voltage and large capacity were used as polymer composite electrode materials. After PTND was synthesized, PANI was synthesized on the surface of PTND. The synthesis and the fine structure were analyzed by FT-IR, XPS, FE-SEM, and FE-TEM. Charge/discharge capacity and cyclic voltammetry measurements were carried out for the electrochemical performance as a polymer cathode active material for lithium secondary batteries. The discharge capacities of PANI/PTND after 1,5, and 10 cycles at 1.3~4.0 V voltage range and room temperature 167 mAh/g, 90 mAh/g, and 81 mAh/g. When we compared with PANI (80, 67, and 62 mAh/g), the discharge capacity after 10 cycles was improved about 30%. After 50 cycles, the discharge capacity of PANI/PTND was 67 mAh/g.
Small-sided game 트레이닝이 유소년 축구선수의 유, 무산소 능력과 경기 중 활동 형태에 미치는 영향
오지우(OhJi-woo),이용수(LeeYoung-soo),성기운(SungKi-woon) 한국체육학회 2018 한국체육학회지 Vol.57 No.5
본 연구는 7주간의 small-sided game(SSG) 트레이닝이 중학교 축구선수의 유, 무산소 능력 및 경기 중 활동 형태에 미치는 효과를 분석하는데 목적이 있다. 이를 위해 경력 3년 이상의 중학교 축구선수 16명을 비교집단인 인터벌 트레이닝 그룹(Interval training group, ITG, n=8)과 실험집단인 SSG를 수행한 SSGG(Small-sided game training group, n=8)그룹으로 무선 배정하였다. 각 그룹은 모든 기존의 팀 훈련은 동일하게 제한한 환경에서 7주간 주2회 60분씩 각각의 트레이닝 프로그램을 추가로 수행하였다. 7주간의 트레이닝의 결과, 트레이닝 전과 비교하여 유산소성 능력은 두 그룹 모두에서 유의하게 증가된 반면 (p<.05), 무산소성 능력의 지표인 평균 파워가 ITG에서 유의하게 증가하였으나(p<.05), SSGG에서 통계적으로 유의한 증가가 나타나지 않았다. 실제 경기의 모의 형태인 SSG 트레이닝이 경기 중 선수들의 활동 형태의 변화를 유도하는 지를 알아보기 위해 영상촬영을 통해 선수들의 움직임을 기록하고 트레이닝 전, 후의 변화를 분석하였다. 7주간의 SSG를 통해 선수들은 경기 중 총 이동거리가 증가하였으며(p<.01) running (p<.05), HIR (p<.01)과 같은 고강도 형태의 움직임의 비율이 유의하게 증가하였다. 결론적으로, SSG트레이닝은 유소년 축구 선수의 유산소성 능력의 향상에 기여할 뿐만 아니라 경기 중 활동 형태를 더욱 활발한 형태로 변화시켰으며 총 이동거리 또한 증가시켰다. 따라서 기술과 체력의 균형적인 발달이 요구되는 유소년 선수들에게 SSG트레이닝이 체력 발달에 집중된 전통적 트레이닝 방법의 효과적인 대안이 될 수 있을 것으로 사료된다. The purpose of this study is to determine effects of small-sided game (SSG) on aerobic, anerobic capacity and activity pattern in youth elite football players. 16 soccer players were randomly assigned to interval training group (ITG, n=8) and small-sided game training group (SSGG, n=8). Participants performed interval and small-sided game training twice a week for 7 weeks in addition to regular football team training. Participants were performed Yo-Yo intermittent test to examine differences of aerobic capacity in ITG and SSGG. Both groups showed significant increase in aerobic capacity (p<.05). In relation to anaerobic capacity, ITG showed improvement in mean power of the Wingate test (p<.05) whereas SSGG did not show any improvement. To examine the effect of SSG training on activity profile, we recorded and analysed the activities of players in SSGG during SSG. After SSG training for 7 weeks, the participants covered longer total distances (p<.01) and high intensity movement, such as running (p<.05) and high intensity running (p<.01). In conclusion, SSG training can be used as regular training to improve aerobic capacity and activity pattern in youth elite football players.
오지우(J. W. Oh),정영만(Y. M. Jeong),김강윤(G. Y. Kim),웬치탄(C. T. Nguyen),양순용(S. Y. Yang) 유공압건설기계학회 2015 유공압건설기계학회 학술대회논문집 Vol.2015 No.10
transmission valve body cover for car was a material modification of the resin in the existing aluminum as a way of reducing car weight , processing method according thereto or assembly methods also can form a lot of changes , transmission valve body cover , cylinder head cover, etc. Until now, the general Covers but the mainstream , such as die-cast aluminum , with lightweight magnesium requirements angry , being angry resin . In general, a synthetic resin such as nylon-based material cost per unit weight to be used is from about 1/2 to less specifications, depending on the weight and shape the material as compared to the cost of aluminum hapdeum.
진공 시스템을 위한 수유분 미스트 포집 시뮬레이터 개발에 관한 연구
오지우(J. W. Oh),김태운(T. W. Kim),웬치탄(C. T. Nguyen),김용석(Y. S. Kim),양순용 유공압건설기계학회 2015 유공압건설기계학회 학술대회논문집 Vol.2015 No.6
A process of producing the Heavy and the secondary battery to the vacuum force to remove the water, and vacuum dried to remove residual solvent (chemical resin) (dried) and process gas (Solvent) occurring in each step of the vacuum generated by the heating degassing process, and the like, vacuum drying process and vacuum degassing process has been used in this way is essentially a vacuum pump. The process is applied to the vacuum pump is generated in the production water or an oil, gas or the like can be mixed, because of the oil mist in the vacuum pump in response to the vacuum oil cakes such as upset is fixed in a short time the pump is used is causing problems with the operation suffer from the problems such as the maintenance to cause corrosion as well as a pump device, and the exhaust. In this study, the development of a heavy electric equipment and a secondary battery and for mist removal system according to the proposal of the custom property that the mist generated in the various production processes, the oil can, a simulator to test the release properties of the mist.
자율주행자동차의 주행환경을 고려한 라이다 틸팅 메커니즘 개발에 관한 연구
오지우(J. W. Oh),김태운(T. U. Kim),김인호(I. H. Kim),양순용(S. Y. Yang) 유공압건설기계학회 2016 유공압건설기계학회 학술대회논문집 Vol.2016 No.6
This research discusses about using LIDAR for recognizing the vehicles or the obstacles in the front. The LIDAR (Light Detection and Ranging) transmits a laser and receives its reflection from the objects as the vehicles or the obstacles. Basing on the Pitching of vehicle, the distance to obstacles is determined by measuring the response time of laser signal, frequently this measurement is effected by reflecting angles in measuring process, therefore the reliability of measured data is gotten lowered. Non-measurable area accordance with the pouting position occurs. In this paper, a basic study on the development of Tilting mechanism for minimizing the non-measurable area when parking or driving on narrow road or alleys.
오지우(J. W. Oh),정영만(Y. M. Jeong),김강윤(G. Y. Kim),웬치탄(C. T. Nguyen),양순용(S. Y. Yang) 한국자동차공학회 2015 한국자동차공학회 지부 학술대회 논문집 Vol.2015 No.11
transmission valve body cover for car was a material modification of the resin in the existing aluminum as a way of reducing car weight, processing method according thereto or assembly methods also can form a lot of changes, transmission valve body cover, cylinder head cover, etc. Until now, the general Covers but the mainstream, such as die-cast aluminum, with lightweight magnesium requirements angry , being angry resin. In general, a synthetic resin such as nylon-based material cost per unit weight to be used is from about 1/2 to less specifications, depending on the weight and shape the material as compared to the cost of aluminum hapdeum.