http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
< 전시-P-45 > 폐 MDF재생섬유에 대한 반응성염료계의 고착특성
주선경,노정관 한국목재공학회 2018 한국목재공학회 학술발표논문집 Vol.2018 No.1
국내에서 가장 많이 생산되는 목질재료 중 현재 물질로서 전혀 재활용이 되고 있지 않는 폐 MDF를 인테리어 성형 소품 제조용의 원료로 재활용하기 위하여 전년도에는 황, 적, 청색의 반응성 염료(클로로 트리아진계와 비닐슬폰계), 직접염료(디아조계), 배트염료(퀴논계)를 사용한 재생목질섬유의 염색특성을 비교 검토하였다. MDF 재생염색섬유의 경우 셀룰로오스 염색에 주로 사용되는 염료에 의해 염색이 비교적 용이하게 이루어진다는 것과, 버진섬유와 재생섬유간의 염색특성에는 크게 차이가 없다는 것을 확인하였다. 그러나 염색한 재생섬유의 자외선 촉진 열화처리에 의한 변색의 정도를 색차에 의해 비교한 결과, 자외선의 조사 시간이 증가됨에 따라 색차가 증가하였으며, 염료별로는 직접염료의 일광견뢰도가 가장 불량하였으며, 이어 반응성염료 및 배트염료의 순이었다<sup>1~3)</sup>. 따라서, 폐기되는 MDF로 부터 얻은 재생섬유를 인테리어 소품의 제조에 활용하기 위해서는 앞으로 최적의 염색조건에 대한 검토와 일광견 뢰도의 향상에 관한 연구가 필요하다. 본 연구에서는 폐 MDF 재생염색섬유의 자외선에 의한 변퇴색성 개선을 위하여 국내산 리기다소나무로 제조한 MDF를 다시 해리하여 얻은 폐 MDF 재생섬유에 대해 반응성 염료(Reactive Red H-E3B, Reactive Red RB 133%)의 고착특성과 자외선에 의한 변색 특성을 검토하였다. 반응성 염료에 의해 염색된 폐 MDF 재생염색섬유의 일광견뢰도는 미반응 염료의 잔존유무 및 고착정도에 의해 좌우되며, 소핑처리와 고착처리에 의해 자외선에 의한 변퇴색성을 크게 향상시킬 수 있었다. 1) 주선경, 노정관. 2017. MDF용 섬유와MDF 재생섬유의 염색성 비교. 2017 한국목재공학회 춘계 학술발표 요지집. p 31. 2) 주선경, 노정관. 2017. 폐 MDF 염색섬유의 자외선에 의한 변색. 2017 한국목재공학회 추계 학술발표 요지집. p 25. 3) 주선경, 노정관. 2017. 폐MDF를 이용한 염색재생섬유 제조. 목재공학 Vol. 45(3). 297-307.
오주선,심성보,신민주,박정호,정우진 강원대학교 농업생명과학연구원 2022 농업생명환경연구 Vol.34 No.3
In this study, an analysis of a urea storage tank was performed using a simulation program, and a reinforcement method was proposed to limit the amount of deformation of the tank wall to a level that does not cause psychological anxiety. The sensory threshold for recognizing a straight line as a curve was calculated using experimental data from the literature to calculate the maximum amount of straight-line deformation. The calculated result was set as the design goal and was compared with the analysis results of the amount of deformation of the urea storage tank. It was confirmed that the design goal was satisfied when six stiffeners were applied.
주선옥(朱善玉) 한국지역정보화학회 2017 한국지역정보화학회지 Vol.20 No.1
취약성, 위험을 극복하는 능력 향상과 적응적 관리(adaptive management)를 통한 리질리언스적 접근이 대두되고 있다. 복잡성과 불확실성의 가중은 전통적 패러다임의 한계를 드러내었고, 대안적 시각과 접근을 요구한다. 리질리언스는 다양성에 대한 긍정적인 적응, 위기 상황의 극복과 원래의 상태로 돌아갈 수 있는 시스템의 능력, 변화된 환경에서 번창하는 능력, 사회구성원 전체의 총체적 협력이 강조되는 개념이다. 이에 본 연구는 생태계에 유비(類比)하여 정책체제를 인식하고, 리질리언스 관점에서 그 의미와 가능성을 탐색하고자 한다. 민간 및 공공부문의 ICT기반 사회혁신과 지역차원의 경험적 사례를 분석하고, 정책생태계 리질리언스를 위한 기본방향과 정책적 시사점을 제시한다. Resilience approaches are emerging through adaptive management and improved ability to overcome vulnerabilities and risks. Complexity and weighting of uncertainty reveal the limitations of traditional paradigms and require alternative perspectives and approaches. Resilience emphasizes the positive adaptation to diversity, the ability to overcome crisis situations and return to the original state, the ability to thrive in a changed environment, and the total cooperation of all the members of society. This study seeks to explore the meaning and possibility of the policy system from the point of view of resilience by analogy to the ecosystem. Analyzes social innovation and empirical cases based on ICT in the private and public sectors, and presents basic directions and policy implications for policy ecosystem resilience.
Poly(p-dioxanone) scaffold의 in-vitro특성에 관한 연구
오주선,김학용,이세철,이덕래,최경은 한국섬유공학회 2001 한국섬유공학회지 Vol.38 No.7
In this article, we have described the in-vitro degradation properties of poly(p-dioxanone)(PDO) scaffolds for tissue engineering of periodontal bone. The hydrolytic degradation of the PDO scaffolds was carried out in buffer solution at $25^{\circ}C$. the degradation behavior was evaluated by analysing the SEM photographs of degraded samples, weight loss, DSC thermograms, intrinsic viscostity, and the changes in pH of degradation medium at different intervals of immersion time during the in-vitro test. The pore size of the scaffold was approximately 10~100${\mu}{\textrm}{m}$ and cracks were observed on the surface of scaffolds after 8 weeks immersion time. The decrease in intrinsic viscosity was observed to 20%, 67% and 92% during 4 weeks, 8 weeks and, 28 weeks of immersion time. The rate of weight loss was observed faster during first 4 weeks and about 55% weight loss was observed after 28 weeks. The melting peak appeared at 108.8$^{\circ}C$ with shoulder peak at 87$^{\circ}C$ after 8 weeks and it was moved to 99.9$^{\circ}C$ after 28 weeks. The pH of the degradation medium kept initial value of 7.0 untile 20 weeks, but after that it dropped form 6.79 to 6. Further more we also observed the low molecular weight PDO scaffolds were degraded faster than the high molecular weighte PDO scaffolds.
오주선,남주석,심성보 경상대학교 농업생명과학연구원 2021 농업생명과학연구 Vol.55 No.2
본 연구는 다양한 차종의 승용 자동 변속기 변속 성능 및 내구성 평가를 위한 시험 장비 설계를 위하여 수행되었다. 다양한 차종의 주행 중 변속 특성을 시험 장비에서 구현하기 위하여 가장 작은 배기량을 갖는 차량과 가장 큰 배기량을 갖는 차량의 엔진 성능 곡선, 차량 총 중량, 총 기어비를 분석하였다. 분석된 결과를 바탕으로 하여 차량의 총 중량에 의한 관성이 변속기 후단에 전달되었을 때의 등가 관성을 각각 계산하였다. 다양한 차종의 엔진 관성과 성능 곡선을 만족시키기 위해서 입력 동력원은 정격 출력 440㎾, 정격 토크 146.7 kg·m, 관성모멘트 1.76 kg·m2으로 선정한 후 차종에 따라 3가지의 증속기(2.1:1~4.2:1)를 선택할 수 있으며 추가적인 기계 관성을 증속기 후단에 장착할 수 있도록 설계한다. 출력 동력원은 정격 출력 520㎾, 정격 토크 500kg·m, 관성모멘트 5kg·m2로 선정한 후 2:1 감속기와 추가적인 기계 관성을 장착할 수 있도록 설계한다. 다양한 차종의 자동 변속기 변속 특성 및 내구성을 간단한 장치 변경을 통하여 하나의 시험 장비에서 시험할 수 있는 방법을 대상 차량의 엔진 및 관성 정보를 분석하여 제안하였다. 이러한 시험 장비를 활용한다면 자동변속기 개발 및 성능 향상을 위한 비용 및 시간을 크게 절감할 수 있을 것이라 판단된다. This study was conducted to design a test bench for evaluating the transmission performance and durability of the automatic transmission of various passenger cars. In order to realize the shift characteristics o f various passenger cars in the test b ench, the engine performance curve, gross vehicle weight, and gross gear ratio of the vehicles with the smallest and largest emissions were analyzed. Based on the results of the analysis, the equivalent inertia when the inertia by the gross weight of the vehicle was transmitted to the end of the transmission was calculated respectively. In order to satisfy the engine inertia and performance curves of various vehicles, the input power sources corresponding to the rated output 440㎾, rated torque 146.7 kg·m and inertial moment 1.76 kg·m2 were selected, and three step-up gearbox (2.1:1 ~ 4.2:1) were selected depending on the model. In addition, it is designed that additional mechanical inertia can be installed at the rear end of the step-up gearbox. The output power sources corresponding to the rated output 520㎾, rated torque 500 kg·m and inertial moment 5 kg·m2 were selected, and 2:1 reducer and additional mechanical inertia were designed to be installed. The engine and inertia characteristics of the target vehicle was analyzed, and a method to test the shift characteristics and durability of various vehicles of automatic transmissions in one test bench through simple device change was proposed. It is believed that if the test bench proposed in this study is applied, the cost and time for automatic transmission development and performance improvement can be greatly reduced.
무증상 한국 성인의 발근육과 허리엉치 척추옆 근의 탈신경 전위의 빈도
오주선,이베나,임정훈,송대헌,이원일 대한재활의학회 2008 Annals of Rehabilitation Medicine Vol.32 No.1
Objective: To determine the prevalence of denervation potentials from the foot intrinsic and the lumbosacral paraspinal muscles in asymptomatic persons in Korea. Method: Nerve conduction studies were performed in 80 asymptomatic persons at sural, peroneal and tibial nerves. We excluded 15 persons with abnormal values of nerve conduction studies. In our study, 36 males and 29 females participated and the mean age of subjects was 52.9 years. We checked denervation potentials from unilateral lumbosacral paraspinal (L4-S1) and foot intrinsic muscles (abductor hallucis and extensor digitorum brevis muscle) by needle EMG. Results: The prevalence of denervation potentials from foot intrinsic muscles was 3% (2 cases out of 65 asymptomatic subjects). Denervation potentials consisting of a positive sharp wave were seen from the abductor hallucis muscle. No subjects showed any denervation potentials from the lumbosacral paraspinal muscles in our study. Abnormal X-ray findings were seen in subjects who had denervation potentials from the foot intrinsic muscles. Conclusion: The prevalence of denervation potentials from the foot intrinsic and the lumbosacral paraspinal muscles in asymptomatic person was not as high as previously reported.