http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Al판재의 일축인장 소성불안정 변형에 미치는 두께의 영향
吳明錫 釜山工業大學校 1990 論文集 Vol.32 No.-
Plastic instability in uniaxial tension of commercial purity Al has been studied with the emphasis of effects of thickness in cold worked specimens and recrystallized specimens. The thickness change gave rise to change in stress state and the amount of strain localization in spcimen after diffuse necking. Therefore the thickness of specimens could control modes of plastic instability. Regardless of recrystallized or cold worked state, the necked mode changed from diffuse necking to local necking, at about 1.5~2mm in thickness. When the longitudinally projected necking depth reached to about 0.5mm the specimens became fractured regardless of the specimen thickness.
오명석,고태조,박성호,김희술,정종운 한국공작기계학회 2002 한국공작기계학회 추계학술대회논문집 Vol.2002 No.-
The mechanism of the aerosol(mist) generation generally consists of spin-off, splash, and evaporation/condensation. Most researchers showed some theoretical model for predicting the particulate size and generation rate without real cutting in turning operation. These models were based on the spin-off mechanism, and verified good for modeling the process. However, in real machining, the cutting tool destroys the flow direction of the cutting fluid and generate the heat by the relative motion of between tool and workpicee, and so the mass loading of the mist is greatly increased as compared with non-cutting. In this paper, we show some experimental data that the mist formation characteristics of cutting is different from that of non-cutting.
吳明錫 釜山工業大學校 1985 論文集 Vol.27 No.-
S의 함유량을 변화시킨 오스케나이트계 스테인리스강을 이용하여 소재에 함유된 비금속개재물의 양이 압접이음의 기계적 성질에 관여하는 영향을 검토한 결과 다음과 같은 결론을 얻었다. (1) 소재의 S량의 변화가 소재 및 압접이음의 기계적 성질에 관여하는 영향은 신장에서는 1:5, 감소에서는 1:3, 흡수 에네르기에서는 1:1이다. (2) 압접에 따른 연성의 저하는 S량이 증가할때 크게 되고 S량이 0.025% 이상6에서는 압 접에 별다른 영향을 주지 않는다. (3) 소재에 함유된 유황 함유량이 많다는 것은 압접이음의 연성과 밀접한 관계가 있고 그 재료의 마찰압접성을 나타내는 지표로 될 수 있다.