http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
외다이아프램 응력경로에 따른 용접조립 각형기둥-보 접합부의 내진성능 평가
김선희,염경수,최성모,Kim, Sun Hee,Yom, Kyong Soo,Choi, Sung Mo 한국강구조학회 2014 韓國鋼構造學會 論文集 Vol.26 No.4
콘크리트 충전강관 기둥에 모멘트 접합부를 만들기 위해서는 추가적인 다이아프램 설치가 필요하다. 그 중 내측 다이아프램과 관통 다이아프램을 용접하기 위해서는 기둥강관에 특수한 용접기술이 필요하다. 하지만 이런 기술은 제작업체의 특수장비 보유에 따라서 제작성 저하와 생산단가 상승 유도 등의 문제를 갖고 있다. 따라서 본 연구에서는 외다이아프램을 갖는 실대형 기둥-보 접합부를 제작하였고, 반복가력 실험을 수행하였다. 다이아프램의 용접 유무와 콘크리트 충전 여부, 형상에 따른 총 6개의 T자형 접합부 실험을 통해 내진성능을 평가하였다. 또한 외다이아프램 내력식에 대한 분석이 이뤄졌다. 본 실험에서 나온 결과를 인장내력식의 적절성을 검토 하였다. Concrete filled tubular structure should be installed diaphragms for moment connection. However internal and through diaphragm should be special welded when connected to column tube. The other hand, that has become increase of stress concentration and extend of construction error. Therefore, In this study the seismic performance of beam to column connections with External Diaphragms and implement cycle loading experiment. we had evaluated seismic performance with mentioned experiment which is concrete filled or not, variable shapes, to be welded or not of diaphragm. Also, formula of strength of external diaphragm was analyzed and looked into adequacy with regard to formula of tension strength.
관통형 다이아프램을 갖는 조립형 콘크리트 충전 각형 합성기둥-보 접합부의 내진성능
김선희,염경수,최성모,Kim, Sun Hee,Yom, Kyong Soo,Choi, Sung Mo 한국강구조학회 2014 韓國鋼構造學會 論文集 Vol.26 No.5
콘크리트 충전형 기둥은 두 재료의 상호작용으로 인해 강도와 연성이 증대되어 기둥부재로 많이 사용되고 있다. 부재를 효율적으로 사용하고자 하는 노력에서 얇은 강판을 사용한 폭두께비가 큰 용접조립각형 기둥형상을 제안하였다. 세장비가 큰 용접조립 각형 기둥-보 접합부에 관한 연구로써 구조적 특성을 명료하게 평가하고 접합부의 내진성능을 고찰하고자 한다. 따라서 본 논문에서는 T자형 기둥-보 접합부의 반복가력 실험을 수행하였으며, 주 변수는 다이아프램 설치 유무와 콘크리트 충전유무이다. 모멘트-회전각 관계, 소산에너지, 파괴거동등을 비교하여 변수에 따른 용접조립각형기둥-보 접합부의 응력전달 메커니즘을 평가하고자 한다. Concrete filled tubular columns are widely used because the mutual reaction between the concrete and the tube improves strength and ductility of the columns. In an attempt to secure efficient use of members, built-up square columns featuring large width-thickness ratio and the use of thin steel plates are suggested in this study. In order to evaluate the structural characteristics and seismic performance of the column-to-beam connections of the new shape columns, cyclic load test of T-shaped column-to-beam connections was conducted with variables of diaphragms and concrete-filling. Moment-rotational angle relationship, dissipated energy and failure behavior were compared to evaluate stress transfer mechanism of the new shape built-up square column-to-beam connections associated with the variables.
용접조립 각형 CFT 단주의 구조특성에 관한 실험적 연구
이성희,최영환,염경수,김진호,최성모,Lee, Seong Hui,Choi, Young Hwan,Yom, Kyong Soo,Kim, Jin Ho,Choi, Sung Mo 한국강구조학회 2008 韓國鋼構造學會 論文集 Vol.20 No.5
용접조립 각형강관은 얇은 강판을 L형으로 절곡한 4개의 단위 부재를 플레어 용접으로 용접한 강관으로 용접조립 각형강관이 CFT 기둥으로 사용될 경우 콘크리트와 강관 폭의 중앙에 설치된 리브가 국부좌굴을 방지하는 역할을 하며 강관은 내부의 콘크리트의 구속하여 콘크리트의 구조내력을 향상시키는 역할을 한다. 본 연구에서는 용접조립 각형강관기둥의 제작방법을 소개하고 용접조립 각형강관과 용접조립 각형CFT 기둥 의 구조성능을 평가하기 위해 강관의 형상(용접조립 각형강관, 일반강관)과 폭두께비(B/t=50, 58, 67), 콘크리트의 강도(f'c=, 10MPa, 40MPa) 를 변수로 총 15개의 실대형 실험체를 제작하여 구조실험을 수행하였으며 용접조립 각형강관의 단면효율과 구조내력의 우수성을 확인하였다. Welded built-up square tubes are manufactured by flare welding at the center of the column width for cold-formed L-shaped four-piece plates and improved composite effect of concrete and steel by vertical inner anchor. Also, the axial resistance of concrete is increased by the thinness of the steel column, and the composite effect of concrete and steel prevents the steel column from local buckling. In this study, we introduced a manufacturing method of built-up square column steel square concrete-filled tubular column with vertical inner anchor and superior structural performance of the square stub column verified by the structural test for 15 specimens with parameters of shape of tube (built-up square tube, general steel tube), width over thickness of the steel tube (B/t=50, 58, 67) and the strength of concrete (f'c=10MPa, 50MPa).
강관철근을 보강한 합성기둥의 3시간 가열 후 잔존 압축력 실험평가
김선희 ( Kim,Sun-Hee ),염경수 ( Yom¸ Kyong-soo ) 한국건축시공학회 2021 한국건축시공학회 학술발표대회 논문집 Vol.21 No.2
The concrete inside the steel tube of CFT columns enables them to have great strength and ductility. CFT columns are also excellent in fire-resistance because explosive heat upon a fire can be contained in the tube by the concrete debris. However, the studies to evaluate the residual strength of CFT columns after a fire have not been conducted enough. The studies to evaluate the residual strength of CFT columns after a fire are indispensable because it is the barometer of the damage of composite columns caused by a fire and the degree of repair and reinforcement work for the columns after a fire. Accordingly, the purpose of this study is to evaluate the deterioration of load capacity and structural behavior of square CFT columns with the same shapes and boundary conditions before and after a fire. The study also evaluates the influential factors of the CFT columns reinforced to secure the residual strength after a fire.