http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유도 결합 구조를 응용한 UHF 대역 Near-Isotropic 태그 안테나
안준오,장형민,문효상,이범선,Ahn, Jun-Oh,Jang, Hyung-Min,Moon, Hyo-Sang,Lee, Bom-Son 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.12
본 논문에서는 유도 결합 구조를 응용하여 등방향 방사 특성에 근접하고 기 상용화된 태그 칩과의 임피던스 매칭과 제작이 용이한 UHF(911 MHz) 대역 RFID 태그 안테나를 설계 제작하였다. 제안된 안테나는 $40{\times}46mm\;(0.12{\times}0.14{\lambda})$의 크기를 가지고 수직 입사의 경우에 최대 RCS가 $-18.5dBm^2$이며, 3 dB RCS 대역폭이 9 MHz(1%)이다. 태그 칩과 안테나 임피던스가 단락 상태일 때의 RCS가 방향에 따라 최대 $-16.9dBm^2$, 최소 $-21.4dBm^2$로 4.5 dB의 차이를 보여, 기존 다이폴 형태의 안테나가 가지는 입사파의 방향에 따른 문제점을 대폭 개선하였다. 또한 설계된 안테나를 제작하여 입사파 각도에 따른 RCS를 측정하였고, 시뮬레이션 결과와 유사함을 확인하였다. This paper presents an UHF band(911 MHz) RFID tag antenna which has near-isotropic radiation pattern and easy conjugate impedance matching characteristics to any commercial chips of usual practice through the application of an inductively-coupled feeding. The proposed antenna of compact size $40{\times}46mm\;(0.12{\times}0.14{\lambda})$ has, at normal incidence, the maximum RCS of $-18.5dBm^2$ and the 3 dB RCS bandwidth of 9 MHz(1 %) in case of short chip load. It has the maximum and minimum RCS' of $-16.9dBm^2\;and\;-21.4dBm^2$ depending on the incident angles. The difference of about 4.5 dB is relatively small compared with that (about 70 dB) of a pure dipole antenna. The designed antenna has been fabricated and its RCS' have been measured varying the angles of incidence. The measured RCS' have been found to have good agreement with the simulated ones.
서지영,안준오,Seo Ji-Young,Ahn Jun-Oh 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.9
30 GHz 이상의 밀리미터파 대역에서 1 Gbps 이상의 초고속 광대역 서비스 제공에 적합한 $57\sim64GHz$ 대역에 대한 국내 외 주파수 및 기술 표준화 동향을 조사하고, 이에 대한 서비스 시나리오 및 60 GHz대역에 대한 주파수 특성을 분석하였다. 이를 통해 1 Gbps급 ASK변조 모뎀의 채널 대역폭은 2.5 GHz가 필요하고, 양 방향 FDD 통신을 구현하기 위해 전체 7 GHz 대역폭이 필요함을 산출하였다. 산출된 결과에 따라 국내에 적합한 $57\sim64GHz$ 밀리미터파 대역에 대한 주파수 분배 방안을 제안하였다. We surveyed the international and national spectrum & technical standardization trends of extremely adaptive frequency bands $57\sim64GHz$ that can provide 1 Gbps bit-rate ultra broadband service in above 30 GHz millimeter waves, and analyzed service scenarios and the characteristics of these bands, As a result of these analysises, 1 Gbps ASK channel bandwidth needs 2.5 GHz and total bandwidth calculated 7 GHz for dual FDD. finally, we proposed the nationally suitable allocation plan of millimeter wave bands $57\sim64GHz$.
저압 유기금속화학기상증착법을 이용한 태양전지의 제작 및 특성에 관한 연구
안준오,김성일,정관수 慶熙大學校 材料科學技術硏究所 1994 材料科學技術硏究論集 Vol.7 No.-
We have fabricated various solar cells, such as p-n junction p-AlGaAs/p-GaAs/n-GaAs heteroface and p-GaAs/i-(InGaAs/GaAs)/n-GaAs multi quantum well structure solar cells, which art grown by low-pressure metalorganic chemical vapor deposition(MOCVD). The electrical and structural properities of epitaxial layers have been characterized by Van der Pauw Hall measurement and DCXD(double crystal X-ray diffractometry) measurement. Current - voltage (I-V) characteristics have been investigated by curve trace and light source was tungsten-halogen lamp (34.992 mW/cm^(2)). The conversion efficiency of AlGaAs/GaAs p-p-n heteroface solar cell (V_(∝) : 0.62 V, I : 3.2㎃, efficiency : 10.1%) is greater than the simple p-n junction solar cell (V_(∝) : 0.59 V, I : 2.9 mA, efficiency : 9.1%). In the multi quantum well structure solar cell(p-GaAs/i-(InGaAs/GaAs)/n-GaAs), short circuit current (5.5mA) increased a little.