http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
경기지역에서의 인삼 신육성 계통 3, 4년생의 생육특성
안영남,한정아,소호섭,이은섭,박건환,조창휘,김장욱 한국약용작물학회 2018 한국약용작물학술대회 발표집 Vol.2018 No.10
Background : This study examines the main growth characteristics, physiological stress, or diseases damage for 3 and 4-years-old ginseng in the new lines cultivated in Gyeonggi for development of new lines of Ginseng. Methods and Results : Eumseong 13, 14 and 15, which are two-years-old seedling in the new line ginseng were transplanted in 7 lines × 9 rows (70 plants)/1.62㎡ in 2015 along with Gumpoong and Yeonpoong as the control lines while Eumseong 16 and 17 as well as Chunpoong as the control line were transplanted in the same way in 2016. The ginseng shading was installed with the front post of 170 ㎝ high and the rear post of 100 ㎝ high using the rear line while as the sun blocking material, the aluminum shade plate was used. As for the new growth lines of 3 and 4-years ginseng in the new growth line, the aerial parts of the ginseng and underground part of ginseng were examined. In addition, the physiological stress such as the leaf discoloration, rusty root and root rot as well as the resistance against the disease were examined. It was found out that as for the aerial parts of 3-years-old ginseng in test line, Eumseong 16 and 17 were better in the growth than the control lines were while in 4 years old ginseng, Eumseong 13 and 14 were better in the growth than Gumpoong as the control line was. As for the root weight of the 4-years-old ginseng for the underground part, there was no significant difference compared with control line while in 3-years-old ginseng, Eumseong 16 and 17 were heavier. The leaf discoloration did not happen to both 3 and 4-years-old ginseng. As for the root rot, 3-years-old Eumseong 16 and 17 suffered less root rot in the same way as for the control line. 4-years-old Eumseong 14 and 15 had less root rot in the same way as for the control line. 3-years-old Eumseong 16 and 17 have less rusty root in the same way as the control line while as for 4-years-old ginseng, Eumseong 13, 14 and 15 showed a lot of rusty roots in the same way as the control line. Conclusion : Finally, considering the growth characteristics, physiological stress and root rusty of the aerial parts and underground parts of the ginseng, we selected Eumseong 16 and 17 as the excellent lines for 3-years-old ginseng.
인삼 재배 시 차광재료에 따른 미기상 반응과 엽록소의 함량 변화
안영남,정명근,강광희 한국작물학회 2009 Korean journal of crop science Vol.54 No.4
인삼의 해가림구조에서 차광판 및 차광망의 차광재료 차이에 따른 인삼 재배포의 광량 및 미기상 반응과 광수용체로 작용하는 엽록소 함량의 변화를 조사하여 인삼생육에 적합한 해가림 차광재료의 표준화를 위한 기초 자료를 제공하고자 한 본 연구의 결과를 요약하면 아래와 같다. 1. 차광재료에 따라 맑은 날의 광량은 차광판이 차광망에 비해 70 ~ 76%, 흐린 날은 77 ~ 82% 수준으로 감소되는 양상을 나타내었다. 2. 두둑위치 중 전주의 경우는 하루 총 누적광량에 대비해 맑은 날의 경우 39% 수준, 흐린 날의 경우 51% 누적광량이 높은 양상을 나타내며, 중앙 및 후주행은 맑은 날 및 흐린 날 구분 없이 모두 하루 총 누적광량에 비해 낮은 양상을 나타내므로, 두둑위치에 따른 누적광량의 차이가 분명하였으며, 차광재료에 관계없이 두둑위치에 따라서는 전주 > 중앙 > 후주행의 순으로 광량이 낮아지는 양상을 나타내었다. 3. 차광재료에 따라 차광망이 차광판에 비하여 높은 온도를 유지하였고, 두둑위치에 따라 차광망이 차광판 보다 1.9~3.1℃ 높은 양상을 나타내었다. 4. 차광재료별 맑은 날의 평균 누적온도는 외부온도 대비차광판의 경우 7.3% 감소하는 양상을 나타내었으나, 차광망의 경우 0.7% 증가되는 양상을 나타내었고, 흐린 날의 평균 누적온도는 차광판의 경우 0.7% 감소하는 양상을, 차광망의 경우 1.6% 증가하는 양상을 보였다. 5. 차광재료에 따른 두둑위치별 일일 누적온도의 차이를 비교해 보면 차광망이 차광판에 비해 맑은 날의 경우 전주, 중간 및 후주행이 각각 7.0, 7.8 및 8.8% 높은 양상을 나타내고, 흐린 날의 경우 각각 1.7, 1.6 및 3.5% 높은 양상을 나타내어 두둑위치에 관계없이 차광판이 차광망에 비해 온도가 낮은 양상을 나타내었다. 6. 엽록소 SPAD 값은 전주와 중앙의 두둑위치에서는 차광판이 차광망에 비하여 높게 나타났고 후주에서는 차이가 없었다. This study was carried out to investigate the microclimate (photosynthetically active radiation and temperature) response to different shading materials(shade plate, and polyethylene net) on Korean ginseng(Panax ginseng C.A. Meyer) bed. Photosynthetically active radiation(PAR) under polyethylene net was approximately 24 ~ 30% higher than that under shade plate on sunny day. Also, PAR was remarkably decreased from the front to the rear rows of ginseng beds. Temperature under polyethylene net was higher than that of shade plate. Internal temperature under polyethylene net was 1.9 ~ 3.1% higher than that under shade plate at the different rows of ginseng bed. Mean of total daily temperature under polyethylene net was higher at the rear rows than at the front rows, while that under shade plate was higher at the front rows than at the rear row of ginseng bed. Mean of total daily temperature on sunny days(April 15 and May 17) was 7.3% lower under shade plate than above outside but, polyethylene net was 0.7% high, while that on cloudy days(April 11 and May 15) was 1.6% higher under polyethylene net than above outside, but shade plate was 0.7% low. Also, overall mean of total daily temperature under polyethylene net was 7.0, 7.8, and 8.8 % on sunny day(April 15 and May 17), and 1.7, 1.6, and 3.5% on cloudy day(April 11 and May 15) higher than that under shade plate, respectively. The SPAD values of 6 years old ginseng at two point(front, center) in bed under shade plate showed the highest value, and the lowest under polyethylene net. The SPAD of 6 years old ginseng at rear in bed was not statistically significant under two shading materials.
안영남,강광희,이선영,정명근 한국작물학회 2002 Korean journal of crop science Vol.47 No.2
This study was carried out to find out the optimum harvesting time on the basis of physiological characteristics, yield and commercial value in four years old ginseng. For this purpose, the changes of agronomic growth characteristics of the aerial and underground parts with different growing stages were examined with fourth year ginseng. The leaf growth was dramatically increased from the mid-April (shooting stage) to the mid-May (flowering stage), and the growth was nearly completed by the mid-May, but the stem growth continued by the mid-August. The weight of fresh root decreased from the April (20.7g) to the June (18.2g), but increased from the June to the October(45. 1g). The yield of fresh root per "Kan" was 1.5 ㎏, 1.2㎏ and 1.3㎏ at the April, the May and the June, respectively, thereafter continually increased to 2.9 ㎏ of the October, which showing the maximum yield. In conclusion, the ginseng root was generally harvested from the September to the October at farm-house, but it had better be harvested after the mid-October rather than from September to October considering the weight of dry root and the yield of fresh ginseng. 충청북도 증평의 독농가가 재배한 4년생 인삼의 지상부 및 지하부의 주요 생육특성, 뿌리수량 및 주요 작물학적 특성의 상관을 생육시기별로 조사하였으며, 그 결과를 요약하면 다음과 같다. 1. 4년생 인삼의 잎의 생장은 4월 중순(출아기)에서 5월 중순까지 급격히 진행되어 5월 중순이 되면 생육이 대체로 완성되며, 줄기는 8월 중순까지 계속 신장하였다. 2. 근생체중은 4월(20.7g)부터 6월(18.2g)까지는 감소하나 그 이후 10월(45.1g)까지 계속 증가하였다. 3. 칸당 수삼 수량은 4월에 1.5㎏이었으나 5월과 6월에 각각 1.2㎏ 및 1.3㎏으로 감소의 양상을 나타내었고, 6월 이후 다시 증가하여 10월에는 2.9㎏으로 최대의 수량을 나타내었다. 4. 생육시기별로 수확한 4년생 인삼의 주요 작물학적 생육특성의 조사 형질 중 동장을 제외한 모든 생육 특성은 근중과 고도로 유의한 정의 상관을 나타내었다. 5. 4년생 인삼의 관행적 수확기는 9월-10월로 알려져 있으나 건근중 및 수삼의 수량을 고려할 때10월 중순으로 늦추는 것이 보다 유리한 것으로 조사되었다.
안영남,김철희,이원범,김정한,Ahn, Young-Nam,Kim, Cheolhee,Lee, Wonbeom,Kim, Jeonhan 대한용접접합학회 2013 대한용접·접합학회지 Vol.31 No.6
Gas nitriding is a surface hardening process where nitrogen is introduced into the surface of a ferrous alloy. During fusion welding of nitrided carbon steel, the nitride inside weld metal is dissolved and generates nitrogen gas, which causes porosities - blow holes and pits. In this study, several laser welding processes such as weaving welding, two-pass welding, dual beam welding and laser-arc hybrid welding were investigated to elongate the weld pool to enhance nitrogen gas evacuation. The surface pits were successfully eliminated with elongated weld pool. However blowholes inside the weld metal were effective reduced but not fully disappeared.
내면 용접부재의 전자세 레이저-아크 하이브리드 용접 연구
안영남,김철희,김정한,Ahn, Young-Nam,Kim, Cheolhee,Kim, Jeonghan 대한용접접합학회 2015 대한용접·접합학회지 Vol.33 No.1
Laser-arc hybrid welding has been considered as an effective pipe girth welding process since early 2000's. Tolerance for fit-up offsets such as gap and edge misalignment is one of most important requirements in pipe girth laser-arc hybrid welding, and several approaches using parameter optimization, a laser beam scanning and an arc oscillation have been tried. However the required offset tolerance has not been fully accomplished up to now and laser-arc hybrid welding has not been widely applied in pipeline construction than expected, despite of its high welding speed and deep penetration. In this study, internal welding was adopted to ensure the offset tolerance and sound back bead. The effect of welding parameters on bead shape was investigated at the flat position. Also tolerances for gap and edge misalignment were verified as 0.5 mm and 2.0 mm, respectively. The position welding trials were conducted at several welding positions from the flat to the overhead position in a downward direction. With the fixed welding speed, arc current for gas metal arc welding current and laser output power, adequate welding voltages for gas metal arc welding were suggested for each position.
안영남,김철희,Ahn, Young-Nam,Kim, Cheolhee 대한용접접합학회 2013 대한용접·접합학회지 Vol.31 No.4
In this research, laser cladding characteristics were investigated for various filler metal feeding methods such as powder, cold wire, and hot wire feeding. Appropriate parameter window, deposition rate, material efficiency and dilution for each filler feeding method were evaluated with same laser power and cladding speed range. Laser powder cladding has wider process parameter window but higher material efficiency and lower dilution were achieved by laser wire cladding. Among these feeding methods, laser hot-wire cladding showed best efficiency in material usage and deposition rate.