http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
안경현,김재덕,김병옥,Ahn, Kyung-Hyun,Kim, Jae-Duk,Kim, Byung-Ock The Korean Academy of Periodontoloy 2001 Journal of Periodontal & Implant Science Vol.31 No.4
치주질환이 진행되는 동안이나 치주처치후 치유되는 과정에서 치조골의 변화가 야기되는데 방사선 사진은 치조골 변화를 감지하는 유일한 비외과적인 방법이다. 미묘한 치조골 변화의 진단은 치료시나 유지관리기 환자의 평가시 중요한 바, 최근에는 규격화시킨 디지털 영상을 이용하여 정량적인 골변화 측정이 가능하게 되었다. 본 연구의 목적은 중등도의 치주질환을 지닌 환자에서 국소마취하에 초기 치주처치를 시행한후 참조체와 함께 구내 방사선 사진을 촬영하고 디지털화 한 다음 참조체 당량치를 이용하여 치조골의 밀도변화를 평가하기 위한 것이다. 이 연구를 위하여 치주질환에 이환된 환자 5명(남자 3명, 여자 2명 : 평균 47.4세)에서 탐침깊이가 5㎜ 이상이고 골내낭이 있는 제 $1{\cdot}2$ 소구치, 제 $1{\cdot}2$ 대구치 40개(상악 24개, 하악 16개)를 대상으로 구강위생교육과 치석제거술, 치근면활택술을 시행하였다. 임상지수는 술전과 술후 8주째에 측정하였고, 방사선 사진은 술전, 술후 2주, 4주, 6주, 8주째에 촬영하였고, 구리 스텝웨지를 사용하여 규격화 하였다. 촬영된 영상은 NIH image program(U.S.A)에 의해 분석되어졌고 이들 자료를 통해 다음과 같은 결과를 얻었다. 1. 치조골의 밀도는 초기치료후 2주째 까지는 감소된 양상을 보이다가 4주 이후로는 점차적으로 증가하는 양상을 보였다. 2. 치조골의 밀도는 초기치료전과 비교시 초기치료수 6주째와 8주째에서 유의한 차이를 보였다.(p<0.01) 3. 상하악 간의 치조골 밀도는 유의한 차이를 보이지 않았다(p>0.05). 이상과 같은 결과를 통하여 볼때 초기 치주처치만으로도 치조골의 밀도가 증가됨을 확인할 수 있었다.
유기클레이의 선택적 분산에 의한 폴리프로필렌/아이오노머/클레이 나노복합체의 유변학 및 형태학적 특성 연구
김두현 ( Doo Hyun Kim ),옥현근 ( Hyun Geun Ock ),안경현 ( Kyung Hyun Ahn ),이승종 ( Seung Jong Lee ) 한국화학공학회 2015 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.53 No.6
본 연구에서는 폴리프로필렌/아이오노머/클레이 삼상 복합체에서 클레이의 분산 및 위치에 따른 복합체의 구조변화와 물성을 연구하였다. 폴리프로필렌 90 wt%, 아이오노머 10 wt%의 블렌드에 클레이를 0~10 wt% 첨가하면서 물성변화를 관찰하였다. 클레이 함량 3%이하의 복합체에서 클레이는 아이오노머 상의 내부에 존재하는 반면, 클레이 함량이 증가하면서 분산상에 클레이가 채워져 견고한 구조가 형성되며 추가적인 클레이는 계면에 존재하게 된다. 이에 따라 계면에서의 상호작용은 폴리프로필렌과 아이오노머로부터 폴리프로필렌-클레이와 아이오노머-클레이의 상호작용으로 변화하며 이에 따라 미세구조 및 유변물성이 변화한다. 복합체의 저장 모듈러스(G``)는 클레이가 분산상의 내부에 존재할 때는 거의 영향을 받지 않지만 클레이가 계면에 위치하면서부터 크게 증가한다. 또한 파단면의 모폴로지 역시 클레이가 복합체의 내부에만 존재할 경우에는 분산상의 상 경계가 뚜렷하게 관찰되고 분산상의 크기가 증가하지만, 클레이가 계면에 위치할 때는 분산상의 크기가 줄어들고 파단면의 모폴로지 역시 상의 경계가 뚜렷하게 관찰되지 않는 상용화된 모폴로지를 보인다. 우리는 복합체의 유변물성의 변화를 통하여 분산상 내부구조의 변화에 따른 클레이의 위치변화와 계면에서의 상호작용의 변화를 정량화 하였다. 또한 고체상태에서의 계면 접착량 측정을 통하여 계면에서의 상호작용의 증가함에 따라 접착력이 증가하고, 미세구조상 클레이 입자가 계면에 존재할 때 결정화도가 낮아짐을 확인하였다. In this study, structural developments of polypropylene / ionomer / clay ternary composites were investigated depending on the dispersion and localization of clay. The changes in physical properties were observed adding organoclays 1~10wt% to 90% polypropylene and 10% ionomer blends. The organoclays were localized inside of the dispersed phase under the composition of 3wt%, however, over that composition, clay particles formed stiff network structure in the dispersed phase and additional clays were localized at the interface between two phases. According to the developments of microstructure, the interaction of ternary composites changed from polypropylene-ionomer to polypropylene- ionomer and ionomer-clay which affected rheological properties. The storage modulus (G``) of the composites was similar to the blends when clays were localized inside of dispersed phase but increased when clays were localized at interface. Also, the fractured morphology of the composites showed phase boundary and growing radius of dispersed phase depending on addition of fillers when clays were found inside. However, when fillers found at the interface between blends, the radius of the dispersed phase decreased and compatibilized morphology were observed. The interfacial interaction of the ternary composite was quantified depending on the structural development of dispersed phase and localization of clay particles by the rheological properties. The interaction of composites at solid state which was measured through peel adhesion strength increased by growth of interfacial interaction of each component. Furthermore, the crystallinity of the composites was decreased when the clay particles were localized at the interface.
굴곡 융착면을 이용한 고밀도폴리에틸렌 관의 버트 융착 공정에서의 열유체 거동 수치모사
유재현 ( Jae Hyun Yoo ),최선웅 ( Sunwoong Choi ),안경현 ( Kyung Hyun Ahn ),오주석 ( Ju Seok Oh ) 한국화학공학회 2017 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.55 No.4
폴리머 재질의 관을 융착 시키기 위해서는 버트 융착 공정을 거치는데, 최근 융착면에 굴곡을 주어 융착 강도를 높이고자 하는 시도가 있었다. 본 연구에서는 융착면의 굴곡이 폴리머의 열유체 거동 및 융착 강도에 어떠한 영향을 미칠 것인지 2차원 축대칭 평면에서 유한요소법을 사용하여 살펴보았으며, 고밀도폴리에틸렌 관을 대상으로 하였다. 열유화 단계에서 융착면의 형상을 따라 굴곡진 상경계면이 나타남을 확인할 수 있었다. 접합 단계에서는 굴곡진 상경계면과 융착면 사이에서의 멜트의 압착 흐름이 나타남을 확인할 수 있었으며, 굴곡융착부의 낮은 전단율은 관의 축과 수직 방향 배향을 완화시켜 융착부 강도 향상에 도움을 줄 수 있을 것으로 예상된다. Butt-fusion welding process is used to join the polymeric pipes. Recently, some researchers suggest the curved surface to enhance a welding quality. We investigated how curved welding surface affects heat and flow behaviors of polymer melt during the process in 2D axisymmetric domain with finite element method, and discussed the effect to the welding quality. In this study, we considered HDPE pipes. In heat soak stage, curved phase interface between the melt and solid is shown along the shape of welding surface. In jointing stage, squeezing flow is generated between curved welding surface and phase interface. The low shear rate in fusion domain reduces the alignment of polymer to the perpendicular direction of pipes, and then this phenomenon is expected to help to enhance the welding quality.
그라비아 프린팅 공정에서 점탄성 잉크와 기판의 계면접착력 평가
유미림 ( Mi Lim Yu ),안경현 ( Kyung Hyun Ahn ),이승종 ( Seung Jong Lee ) 한국화학공학회 2015 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.53 No.1
그라비아 프린팅 공정에서 고해상도의 패턴을 인쇄하기 위해서는 잉크가 기판으로 전사되는 양을 높이는 것이 중요하다. 일반적으로 잉크와 기판의 친화도가 높을수록 더 많은 양의 잉크를 전사시킬 수 있다. 하지만, 실제 산업에서 쓰이는 점탄성 잉크와 다양한 기판의 친화도를 정확히 평가하는 방법은 아직 제시된 바 없다. 본 연구에서는 점탄성 잉크와 다양한 기판의 계면 친화도를 실용적으로 평가할 수 있는 방안을 제시하고자 한다. To produce patterns with high resolution in gravure printing, it is important to increase ink transfer ratio. The ink which has higher affinity with substrate can be transferred more from the roll to the substrate due to the good wettability between ink and substrate. However, it is difficult to evaluate the affinity between the substrate and the ink which is viscoelastic in nature. In this study, we suggest a practical method to evaluate the interfacial interaction between the ink and various substrates.