http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Carboxylic acid와 nano zinc oxide를 도입한 열가소성 폴리우레탄 탄성체의 슬립특성 및 기계적 물성에 관한 연구
신현등 ( Hyun Deung Shin ),김동호 ( Dong Ho Kim ),김구니 ( Gu Ni Kim ) 한국고무학회 2014 엘라스토머 및 콤포지트 Vol.49 No.3
산성기를 도입한 폴리우레탄에 나노산화아연을 첨가하여 열가소성 폴리우레탄 탄성체를 합성하였으며, 합성된 폴리우레탄 탄성체의 기계적물성, 열적특성, 접촉각, 그립특성을 평가하였다. 그리고 산화아연의 함량과 입자 크기가 폴리우레탄 탄성체에 미치는 영향에 대해서 연구하였다. 나노산화아연을 도입한 경우 이온결합이 형성되어 산성기에 의한 수소결합과 동시에 작용하기 때문에 인장강도, 마모 등 기계적 물성 및 그립특성이 향상되는 것이 확인되었다. 폴리우레탄내의 산화아연 함량에 따른 물성평가 결과 나노산화아연 함량이 증가할수록 이온결합 도입에 의한 친수성이 커져서 wet slip이 지속적으로 상승되었으며, 기계적 물성은 산화아연에 의한 이온화율 50%까지 향상되다가 그 이후에는 감소되는 현상을 나타내었다. We synthesized thermoplastic polyurethane elastomer(TPU) with acid group and nano zinc oxide, and characterized their mechanical properties, thermal properties, contact angle and grip property. The effects of the zinc oxide content and size on the physical property of TPU were investigated. When the nano zinc oxide was introduced in TPU with acid group, it had excellent mechanical properties and grip by formation of hydrogen and ionic bonding. The wet slip of TPU with zinc oxide was increased continuously as ionization rate increased due to increase of hydrophilicity and ionic interaction, and mechanical properties were increased with increasing ionization rate up to 50%.
Sulfuric acid를 도입한 열가소성 폴리우레탄 탄성체의 슬립특성 및 기계적 물성에 관한 연구
목동엽,신현등,김동호,김구니,김인수,Mok, Dong Youb,Shin, Hyun Deung,Kim, Dong Ho,Kim, Gu Ni,Kim, In-Soo 한국고무학회 2013 엘라스토머 및 콤포지트 Vol.48 No.4
We synthesized thermoplastic polyurethane elastomer (TPU) with different contents of sulfuric acid group, and characterized their physical properties such as mechanical, thermal and grip properties. And the results were compared with carboxylic acid-introduced TPU. Wet slip, tensile strength and abrasion properties were increased by the introduction of acid group. Mechanical properties increased with increasing the acid content up to 0.3 wt%. However, wet slip was continually increased as the acid content increased due to increase of hydrophilicity of TPU.
Acid Group이 도입된 Casting 폴리우레탄 탄성체의 접착 및 기계적 물성에 관한 연구
목동엽 ( Dong Youb Mok ),신현등 ( Hyun Deung Shin ),김동호 ( Dong Ho Kim ),김구니 ( Gu Ni Kim ),문형석 ( Hyung Suk Moon ),김인수 ( In Soo Kim ) 한국접착및계면학회 2013 접착 및 계면 Vol.14 No.2
Acid group을 도입하여 접착 및 그립성이 향상된 casting 폴리우레탄을 합성하였다. 폴리우 레탄의 그립 특성 및 접착 특성을 확인하였고, 접촉각 및 인장강도, 기계적 물성 등을 연구하였다. Acid 함량에 따른 특성들을 조사하기 위해 acid 함량별로 경화제를 제조하여 각각의 특성들을 연구 하였다. Acid group을 도입함으로써 접착력 및 wet slip이 증가하는 것을 확인할 수 있었으며, 인장강도 및 마모 등 기계적 물성 또한 증가하는 것을 확인할 수 있었다. Acid 함량별로 물성을 측정한 결과 일정한 함량까지 기계적 물성은 증가하며, 일정 함량 이상에서는 기계적 물성 및 접착력이 감소하는 것을 확인할 수 있었다. Wet slip과 접촉각의 경우에는 acid group 도입에 의해 친수성이 증가함으로 acid 함량이 증가할수록 wet slip은 증가하며 접촉각의 경우에는 감소하는 것을 확인할 수 있었다. We synthesized polyurethane elastomer containing acid groups. We measured the adhesion, grip, tensile strength and mechanical properties. Casting polyurethane elastomers were prepared with the contents of acid. The adhesive strength and the wet slip were increased. Also, the tensile strength and abrasion properties were increased. We measured the properties with different acid contents. Increasing the acid content, the mechanical properties were increased. But the mechanical properties were decreased above 0.20 wt% of acid content. The wet slip was increased and the contact angle was decreased as the acid content increased.