
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신종덕 한국광학회 1993 한국광학회지 Vol.4 No.4
Dielectric thin film mirrors are embedded in multimode and single-mode fibers by a fusion splicing technique. The fibers with $45{\circ}$ angled embedded mirrors serve as ultra-compact directional couplers with low excess optical loss of 0.2 dB for multimode and 0.5 dB for single mode at 1.3 ${\mu}m$ and excellent mechanical properties. The reflectance is wavelength dependent and strongly polarization depencient. Far-field scans of the reflected output power measured with a white-light source show a pattern which is almost circularly symmetric with aspect ratio of 1.09 at 5% of the peak power. The splitting ratio in a multimode coupler measured with a diode laser source is much less dependent on input coupling conditions than in conventional fused biconical-taper couplers, indicating that these couplers are less susceptible to modal noise occuring in optical fiber communication systems. Spectral properties of multilayer internal mirrors normal to the fiber axis have been investigated experimentally, and a matrix analysis has been used to explain the results.
OBS 네트워크의 효율적 채널 이용을 위한 그룹 스케줄링 방식
신종덕 대한전자공학회 2003 전자공학회논문지TC (Telecommunications) Vol.40 No.10
In this paper, we propose a group scheduling scheme to efficiently utilize network resources for core nodes in optical burst switching networks. This scheme schedules multiple bursts utilizing an interval graph to obtain the maximum stable set using the information such as arrival times and burst lengths from the collected header packets. Simultaneous scheduling of multiple bursts in a scheduling window results in lower burst loss probability and increased channel utilization than those proposed previously using one-to-one mapping. Simulation results for both cases of variable and fixed burst sizes show that the group scheduling scheme is better than the immediate scheduling, so called Latest Available Unused Channel with Void Filling, scheme in both performance metrics above mentioned. 본 논문에서는 광 버스트 스위칭 네트워크의 코어 노드에서 네트워크 자원을 보다 효율적으로 이용할 수 있는 새로운 스케줄링 방식인 그룹 스케줄링 방식을 제안하였다. 이 방식은 헤더 패킷들을 수집한 후 해당 스케줄링 창에 속하는 버스트들의 도착 시간 및 길이 정보를 이용하여 작성된 구간 그래프로부터 최대 안정 집합을 선택하여 버스트들을 스케줄링하는 방식이다. 다수 개의 버스트들을 동시에 스케줄링하기 때문에 기존의 일대일 스케줄링 방식들 보다 버스트 손실 확률을 감소시킬 수 있으며, 채널 이용률도 높일 수 있다. 버스트의 길이가 지수 분포를 갖는 경우와 일정한 길이를 갖는 경우에 대해 전산 모의 실험으로 LAUC- VF 방식인 즉시 스케줄링 방식과 비교 평가한 결과 버스트 손실 확률과 채널 이용률 모두 그룹 스케줄링 방식이 즉시 스케줄링 방식보다 우수함을 확인하였다.
광 버스트 스위칭 네트워크의 코어 노드를 위한 그룹 스케줄링 성능 분석
신종덕(Jong-Dug Shin),이재명(Jae-Myong Lee),김형석(Hyung-Suk Kim) 한국통신학회 2004 한국통신학회논문지 Vol.29 No.8B
본 논문에서는 광 버스트 스위칭 네트워크의 코에 노드에 그룹 스케줄링 알고리즘을 적용하여, 전산 모의실험을 통해 그 성능을 측정하였다. 성능 평가를 위해, 나채널 입출력 포트를 갖는 코어 노드에 대하여, 즉시 스케줄링 방식과 비교하였다. 그룹 스케줄링은 노드에 먼저 도착하는 버스트 헤디 패킷의 정보를 이용하여 일정한 시간 장에 스케줄링될 버스트들을 스케줄링 하기 때문에, 설사 모의실험 결과 그룹 스케줄링 방식이 즉시 스케줄링 방식보다 버스트 손실 확률과 채널 이용률이 모두 개선되었으며 부하의 증가에 따라 차이가 더욱 커졌다. 또한 출력 포트에 파장 변환기를 사용한 경우에 대해서도 성능을 측정하였다. 이 경우에는 그룹 스케줄링 방식과 즉시 스케줄링 방식의 버스트 손실 확률과 채널 이용률 모두 부하범위 01-09에서 서로 비슷하게 나타났으나, 피장 변환기의 사용 반도는 즉시 스케줄링 그룹 스케줄링 보다 약7배 이상으로 높이, 그룹 스케줄링 방식을 사용하면 보다 경제적인 노드 구조를 구현할 수 있음을 알수 있었다.
신종덕(Jong-Dug Shin) 한국통신학회 2004 한국통신학회논문지 Vol.29 No.1B
OBS (Optical Burst Switching) 네트워크에 관한 연구가 최근 활발히 진행되고 있으나 OBS 네트워크 운용에 필수적인 OAM (Operation and Maintenance)에 대한 연구는 아직 다루어지고 있지 않다. 본 논문에서는 다섯가지 OBS 기능들, 즉 BT (Burst Termination), BTX (Burst Transmission), BSW (Burst Switching), RSC (Routing and Switching Control), 그리고 PAR (Protection and Restoration)을 정의하였고, 이 기능적 모델에 근거하여 네트워크 운용 요구 조건들을 만족시키기 위한 OAM 아키텍처를 설계하였다. 또한, OAM 수행에 필요한 OAM 동작들의 정의와 OAM이 가능한 ingress 에지, 코어, egress 에지 노드들의 구조, 그리고 OAM 정보 및 통신 모델과 프로토콜 등과 갇은 OAM 구현을 위한 기본 체제를 제안하였다. 그리고, 제안된 OAM 아키텍처를 이용하여 OBS 네트워크에서 발생 가능한 여러 가지 장애들에 대한 OAM을 정리하였다.
광 버스트 스위칭 네트워크에서 Look-Ahead 알고리즘을 적용한 그룹 스케줄링의 성능 분석
신종덕(Jong-Dug Shin),장원석(Won-Seok Jang) 한국통신학회 2006 한국통신학회논문지 Vol.31 No.12B
본 논문에서는 광 버스트 스위칭 네트워크의 코어 노드에 그룹 스케줄링을 적용한 경우 발생하는 데이터 버스트 처리 지연시간의 감소를 위한 알고리즘을 제안하였다. 이 알고리즘에서는 일차 스케줄링 세션 종료 직후에, 스케줄링 창 내의 모든 빈 공간(void) 정보를 나타내는 표를 생성하기 때문에, 직전 스케줄링에서 예약에 실패한 데이터 버스트들을 다른 채널의 빈 공간에 재할당할 때, 이 표를 활용하여 효과적으로 버스트 처리 시간 지연을 감소시킬 수가 있다. 이 알고리즘이 적용된 그룹 스케줄링 방식과 기존의 그룹 스케줄링 방식을 비교한 결과, 채널 이용률에 있어서는 서로 거의 동일한 성능을 보이나, 버스트 손실 확률과 파장 변환률은 알고리즘을 적용한 그룹스케줄링 방식이 기존의 그룹 스케줄링 방식보다 약간 우수하였다. 버스트 처리 시간에 있어서는 부하가 약 0.6이하인 영역에서는 기존 그룹 스케줄링 방식이 약간 빠른 반면에, 부하가 0.8이상인 영역에서는 알고리즘을 적용한 방식의 처리 시간이 현저히 짧게 나타났다, 부하 0.9에서 약 1/2.1로 감소하였다. There has been proposed an algorithm to reduce data burst processing delay in group scheduling in core nodes of optical burst switching networks. Since, in this algorithm, look-up tables containing all the void time information in scheduling windows are generated as soon as the primary group scheduling session terminates, it becomes faster to reassign dropped data bursts to proper voids in different data channels by referring to the tables. The group scheduling with this algorithm showed almost the same channel utilization as the one without using the algorithm but performed a little better in both burst loss probability and wavelength conversion rate. On the other hand, per-burst processing time has been reduced dramatically in the load region of higher than 0.8, showing a factor of 2.1 reduction at 0.9.