http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
열처리 온도와 시간에 따른 비대칭 자기 이력 곡선의 변화
신경호(K. H. Shin),민성혜(S. H. Min),이장로(J. R. Rhee) 한국자기학회 1995 韓國磁氣學會誌 Vol.5 No.4
It has been reported that Co-based amorphous ferromagnetic alloys annealed in a small magnetic field develop a reproducible, asymmetric hysteresis loop. If the direction of the field during annealing is regarded as +, the magnetization reversal from - to + is smooth and reversible, with its slope determined by the demagnetizing field of the sample. This phenomenon is called the asymmetric magnetization reversal (AMR). The shape of the hysteresis loop depends sensitively on the condition during the anneal and the alloy composition. Here, we report on the effect of the annealing temperature and time on AMR in a zero magnetostrictive ferromagnetic amorphous alloy. The AMR effect develops in a very short time at a reasonably high temperature, but is stabilized by annealing for a prolonged time.
신경호(K. H. Shin) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
차량에 장착되는 그로멧은 내외부를 차단하여 수분 및 유분 유입을 방지하고 전선을 보호하는 기능을 가진 부품으로 차량 장착 시 작업자가 차체 경로에 따라 수작업으로 진행, 그로멧의 삽입력 및 이탈력 정도에 따라 업무상 근골격계 질환 및 불만 발생 요인이 된다. 본 연구에서는 비선형 해석과 실험계획법 기반인 다구찌 기법을 이용하여 저삽입력 및 고이탈력 특성치를 갖는 차량용 그로멧 형상 최적화 문제를 수행한다. 먼저 설계제약조건을 고려하여 상수인자인 그로멧의 씰 및 판넬 매칭부를 제외한 7 개부의 형상 설계 치수를 제어 인자로 설정하고 잡음 인자의 경우부품 특성을 고려하여 산포에 따라 부품 성능에 영향을 주는 인자로 제어할 수 없으나 실험 가능한 외부 윤활 정도인 마찰계수로 설정한다. 그리고 2 수준계 직교배열표를 배치하여 잡음 인자의 수준과 반복 실험을 통해 인자 별 각 특성치 조건에 맞는 최적 조건을 도출한다. 특성치의 경우 시험 평가 기준으로 음수가 아니고 작을수록 좋은 특성인 망소 정특성을 그로멧의 삽입력으로 설정하고 음수가 아니면서 클수록 좋은 특성인 망대 정특성을 이탈력으로 설정한다. 최종적으로 형상 설계 치수 최적 조합을 통해 저삽입력 및 고이탈력을 만족하는 그로멧의 형상 최적 모델을 수립하고 기본 모델과 비교 및 평가한다.
비정질 자성 합금의 조성에 따른 비대칭 자기 이력 곡선의 변화
신경호(K. H. Shin),민성혜(S. H. Min),이장로(J. R. Rhee) 한국자기학회 1995 韓國磁氣學會誌 Vol.5 No.4
In order to investigate the origin of the asymmetric magnetization reversal effect, we studied the variation of magnetic hysteresis loops with the alloy composition in amorphous ferromagnetic alloy ribbons of (Fe_(1-x)Co_x)_(75)Si_(10)B_(15) system annealed at 380 ℃ for 16 hours in a zero field condition. The asymmetric magnetization reversal effect developed more strongly in amorphous ribbons having two metallic components than in ribbons having a single metallic component. The effect developed more strongly in ribbons showing a smaller value of the saturation magnetostriction. The development of the asymmetric magnetization reversal effect was affected by the ratio of two metallic components as well as the magnitude of the saturation magnetostriction.