http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신 분류기준을 적용하기 위한 원전 해체폐기물량 및 처분 비용 산정에 대한 사전 연구
송종순,김영국,이상헌 한국방사성폐기물학회 2015 방사성폐기물학회지 Vol.13 No.1
1978년 고리 1호기의 상업 운전을 시작으로 현재 우리나라에서는 총 23기의 원전이 운영 중에 있다. 운영 중인 원전으로부터 방사성폐기물이 계속 발생되고 누적되어 갈 것이다. 또한 원전의 수명 연장과 신규 원전의 추가 건설 이외에도 제염해체 연구시설 등 각종 원자력 시설에서 발생하는 방사성폐기물은 꾸준히 증가하고 있다. 우리나라는 최근 IAEA에서 권고하는 신 분류기준을 적용한 신분류기준에 대해 원자력안전위원회 고시를 개정하였다. 중·저준위폐기물을 IAEA 신 분류기준을 적용하여 세분화한다면, 약 98%를 차지하는 저준위 및 극저준위 방사성폐기물과 규제면제폐기물을 효과적으로 처분 할수 있게 된다. 본 논문에서는 신 분류기준을 적용한 해외 적용 사례와 처분 방안 현황을 분석하여 국내에 적용 가능한 최적의 합리적인 적용 방안 및 해체 방사성폐기물량을 산정해 보고자 한다. Since the commercial operation of Kori Unit #1 nuclear power plant(NPP) started in 1978, 23 units at present are operatingin Korea. Radioactive wastes will be steadily generated from these units and accumulated. In addition, the life-extensionof NPPs, construction of new NPPs and decontamination and decommissioning research facilities will cause radioactivewastes to increase. Recently, Korea has revised the new classification criteria as was proposed by IAEA. According to therevised classification criteria, low-level, very-low-level and exempt waste are estimated to about 98% of total disposalamount. In this paper, current status of overseas cases and disposal method with new classification criteria are analyzed topropose the most reasonable method for estimating the amount of decommissioning waste when applying the new criteria.
CRUDTRAN을 이용한 국내 PWR 1차계통내 부식생성물 거동예측에 관한 연구
송종순,윤태빈,이상헌 한국방사성폐기물학회 2015 방사성폐기물학회지 Vol.13 No.4
원자력 발전소 내·외부 계통의 표면에 침적된 방사성핵종은 원자로 구조재 및 핵분열생성물의 부식생성물 활성화에 의해 생성된다. 특히, 1차계통 내부에서 물과 부식된 표면 사이의 지속적인 마찰은 냉각재와 부식생성물을 혼합하게 만든다. 그 리고 이것들은 계통을 따라 순환한다. 본 논문에서는 설계단계에서 사용되는 1차 계통의 부식생성물과 방사성 핵종의 양을 예측하는 CRUDTRAN, DISER, MIGA-RT 및 CPAIR 코드를 분석하였다. 또한, CRUDTRAN을 이용하여 국내 경수로 1차계통 내 부식생성물 거동을 예측하였다. 본 연구목적은 웨스팅하우스형 원전의 실제 데이터로 계산된 값을 측정값과 비교하여 부 식생성물 평가 모델의 신뢰도를 향상시키는데 있다. Radionuclide deposited on the surface of several internal and external systems in a nuclear power plant is created by the activation of corrosion products from nuclear reactor structural materials and fission products. Especially, the constant contact between water and the surface corrodes the inside where primary system makes coolants and corrosion products mixed. Also, these are circulated along the systems. For comparing models, CRUDTRAN, DISER, MIGA-RT and CPAIR codes are analyzed to predict the quantity of radionuclide and corrosion product of primary reactor that are used at the stage of designing. The corrosion products behavior of domestic PWR primary system was predicted by using CRUDTRAN. This study aims to increase the reliability of corrosion product evaluation model by comparing the actual values and calculated values with the data of a Westing House-type Nuclear Power Plant.
송종순,조훈조,정민영,이상헌 한국원자력학회 2017 Nuclear Engineering and Technology Vol.49 No.3
The importance of developing a source-term assessment technology has been emphasizedowing to the decommissioning of Kori nuclear power plant (NPP) Unit 1 and the increase ofdeteriorated NPPs. We analyzed the behavioral mechanism of corrosion products in theprimary system of a pressurized heavy-water reactor-type NPP. In addition, to check thepossibility of applying the CRUDTRAN code to a Canadian Deuterium Uranium Reactor(CANDU)-type NPP, the type was assessed using collected domestic onsite data. With theassessment results, it was possible to predict trends according to operating cycles. Valuesestimated using the code were similar to the measured values. The results of this study areexpected to be used to manage the radiation exposures of operators in high-radiation areasand to predict decommissioning processes in the primary system.