http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
손예지,김소정,전병일,정경혜 한국공업화학회 2017 한국공업화학회 연구논문 초록집 Vol.2017 No.1
Permeation behavior of membranes takes a big role in terms of gas separation and chemical protection. Due to the ionic groups in polyelectrolytes, they may have a high water permeability and the ability to block harmful chemicals. Poly (2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) was synthesized, and crosslinked to prevent its dissolution in water using cross-linkers containing dimethacrylate. Ethylene glycol, Triethylene glycol dimethacrylate and poly(ethylene glycol) dimethacrylate were employed as cross-linkers. PAMPS membranes with different cross-linking degrees were also prepared to investigate the effect of cross-linking on vapor permeabilities for water and dimethyl methylphosphonate, which is the simulant of Sarin (GB). During membrane drying, electrospun nylon nanofibers were inserted into the membrane. The effect of the additive on the physical properties and permeability was also examined.
2-butoxyethanol 첨가에 따른 고분자 구조가 분리막 구조에 미치는 영향
손예지,김노원 한국막학회 2011 멤브레인 Vol.21 No.4
침지법을 이용한 상전이 공정으로 polysulfone (PSF), polyethersulfone (PES) and polyphenylsulfone (PPS)의 정밀여과 평막을 제조하였다. 용매로는 dimethyl formamide (DMF)를, 습윤제 고분자로는 polyvinylpyrrolidone (PVP)를 사용하였으며 pore 형성 촉매로 2-butoxyethanol (BE)을 사용하였다. 얻어진 분리막들은 SEM과 micro permporometer를 이용하여 morphology를 분석하였으며 순수투과도를 측정하여 분리막의 투과성능을 측정하였다. BE의 첨가를 통하여 분리막의 기공을 성장시킬 수 있었으며 고분자 구조에 따라 분리막의 morphology 변화를 관찰할 수 있었다. PSF, PES, PPS 분리막의 평균기공의 크기는 각각 0.282, 0.330, 0.308mum이었으며 공극률은 68.5, 66.1, 66.4%로 유사한 값을 나타내었다. 그러나 PPS 분리막의 경우 PSF, PES 분리막에 비해 높은 기공 밀도와 좁은 기공 분포를 관찰할 수 있었다. 그 결과 PPS 분리막의 순수 투과 유량은 357L/㎡ hr으로 PSF (196L/㎡ hr)나 PES membrane (214L/㎡ hr) 분리막에 비해 훨씬 증가함을 보였다. Flat sheet microfiltration membranes were prepared with polysulfone (PSF), polyethersulfone (PES), and polyphenylsulfone (PPS) by an immersion precipitation phase inversion method. In this method, dimethyl formamide (DMF) and polyvinylpyrrolidone (PVP) were used as a solvent and a wetting polymer additive, respectively. 2-butoxyethanol (BE) was used as a nonsolvent additive catalyst to form pore. The morphology of membranes was investigated by scanning electron microscopy and micropermporometer. The permeability of the membranes was evaluated with the flux of pure water. When the BE was added, the pore size of membranes became larger than blank membranes. The changes in the morphology of membrane due to the BE addition depend on polymer structure. All membranes have similar mean pore size and porosity. The mean pore sizes of PSF, PES, and PPS membranes were 0.282, 0.330 0.308mum, respectively. The porosities of PSF, PES and PPS membranes were 68.5, 66.1, 66.4%, respectively. However, the PPS membrane showed higher pore density on surface and narrower pore size distribution than PSF or PES membrane does. As a result, the pure water flux of PPS membrane (357L/㎡ hr) was higher than that of PSF (196L/㎡ hr) or PES membrane (214L/㎡ hr).
나일론66/탄소섬유 복합체의 물성 및 흐름성에 미치는 분산제와 흐름성 개선제의 영향
손예지,김준석,서동균,김연철 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.1
높은 전자파 차폐 성능을 위한 고 함량의 탄소섬유 첨가로 인해 나일론/탄소섬유 복합체의 용융흐름특성이 열세하여 고분자가공시 성형 불량 문제를 야기할 수 있다. 본 연구에서는 나일론/탄소섬유 복합체의 흐름특성과 물성에 대한 가공조제 및 분산제의 영향을 고찰하였다. 탄소섬유로는 6mm 니켈코팅 탄소섬유(Ni-CF)를 사용하였으며, 분산제로는 acid 계열의 분산제 2종(BYK-P 4101, BYK-P 4102)을 사용하였으며, 흐름성 개선제로는 아민 계열인 2,2,6,6-tetramethyl-4-piperidinyl(BIS)을 사용하였다. 나일론66/탄소섬유 복합체는 이축압출기(twin screw extruder)를 이용하여 분산제/흐름성 개선제의 함량을 다르게 하여 다이온도 기준으로 280°C에서 제조하였다. 나일론/탄소섬유 복합체의 기계적 물성은 만능시험기(UTM)을 이용하여 측정하였으며, 전기적 특성은 표면저항측정기를 이용하여 측정하였다. 시료의 표면 특성은 주사전자편미경(SEM)을 이용하여 관측하였다. 흐름성 개선정도 확인에는 용융지수와 복소점도를 이용하였다.
Preparation of Cross-linked Polymer Electrolyte Membranes and Their Vapor Permeation Behavior
손예지,김소정,전병일,황창민,정경혜 한국공업화학회 2018 한국공업화학회 연구논문 초록집 Vol.2018 No.0
Polyelectrolyte is a polymer having an ionic group such as sulfonic acid or carboxylic acid. It is also electrically conductive and hydrophilic. Permeation behavior of membranes takes a big role in terms of gas separation and chemical protection. Due to the ionic groups in polyelectrolytes, they may have a high water permeability and the ability to block harmful chemicals. Poly (2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) was synthesized, and crosslinked to prevent its dissolution in water using cross-linkers containing dimethacrylate. Vapor permeability was decreased with an increase in a crosslinker length. PAMPS membranes with different cross-linking degrees were also prepared to investigate its effect on vapor permeabilities. Also, electrospun nylon nanofibers were inserted into the membrane and it was clearly seen that the addition of nanofibers decreases vapor permeability.
재생에너지 수용용량 증대를 위한 능동배전망용 통신 네트워크
손예지,양준혁,윤성국 한국통신학회 2020 정보와 통신 Vol.37 No.11
우리나라의 배전망 운용시스템은 배전자동화, 배전지능화를 거쳐 능동배전망으로 발전하고 있다. 능동배전망에서는 배전선로 기기의 원격 제어 기능 및 선로운전 상황을 실시간으로 감시하고 있다. 최근 최대 초당 120회의 데이터를 생성하는 D-PMU(Distribution Phasor Measurement Unit)의 도입으로 인해 기존보다 빠른 전송속도와 높은 신뢰성을 지닌 통신 네트워크의 배전망 적용이 요구되고 있다. 따라서 본고에서는 LTE, 5G와 같은 무선 네트워크 및 유선 네트워크의 고장 복구 기법의 장단점을 분석하고, 능동배전망 적용 가능성을 검토한다.
배전계통의 태양광 수용용량 증대를 위한 지원금 기반 프로슈머 자가소비 최적화 기법
손예지(Ye-Ji Son),임세헌(Se-Heon Lim),윤성국(Sung-Guk Yoon) 대한전기학회 2021 전기학회논문지 Vol.70 No.4
In the power industry, renewable energy has been adopting into the power system to reduce global warming. However, renewable energy expansion such as solar photovoltaic (PV) raises a voltage stability issue for distribution systems. This work proposes a prosumers’ self-consumption optimization scheme through subsidy to increase the hosting capacity of solar PV in distribution systems. Therefore, it reduces cost and increases the utilization of solar PV. We investigate a case study using the IEEE 15 bus test model. The case study confirms that the overvoltage problem is solved by changing the prosumers’ power consumption pattern due to the subsidy. Therefore, the hosting capacity increases without system reinforcement and curtailment.