http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황진상(Hwang, Jin Sang),윤홍식(Yoon, Hong Sic),성우진(Sung, Woo Jin),강성찬(Kang, Seong Chan) 한국측량학회 2011 한국측량학회 학술대회자료집 Vol.2011 No.4
This study is on the analysis of surveying range and accuracy of potable photogrammetric survying system which can be used at field complementary surveying, sign board investigation, and so on. Precise equipment for potable photogrammetric survying was made and adequate surveying model and calibration method were applied. Then, it"s surveying range and accuracy were investigated by field test.
리눅스 임베디드 시스템상에서의 모션 컨트롤 시스템 구현
신민호 ( Min-ho Shin ),성우진 ( Woo-jin Sung ),김시연 ( Si-yeon Kim ),오성빈 ( Sung Bhin Oh ),전재욱 ( Jae Wook Jeon ) 한국정보처리학회 2023 한국정보처리학회 학술대회논문집 Vol.30 No.2
FASTECH 社의 Ezi-Servo Plus-E 제품군은 Windows 기반의 모션 라이브러리와 GUI 프로그램을 이용하여 모션 컨트롤을 수행한다. 이를 Linux기반의 GUI 프로그램과 모션 라이브러리를 작성하여 Raspberry Pi 환경에 적용하였다. Windows와 Linux 기반의 두 프로그램으로 각각 모터를 구동시키고 모터의 위치값을 비교하여 150 미만의 작은 차이를 확인하였다. 이 연구를 통해 Linux 임베디드 시스템으로 모션 컨트롤 시스템을 구축하려는 잠재 고객의 수요를 맞출 수 있을 것으로 기대한다.
윤홍식(Yun, Hong Sic),조재명(Cho, Jae Myoung),조현준(Cho, Hyun Joon),성우진(Sung, Woo Jin) 한국측량학회 2010 한국측량학회 학술대회자료집 Vol.2010 No.4
This paper describe the optimal design of geodetic network by analytical technique based on the quality criteria of network. We described an example of geodetic network design taking into account the precision, reliability and strength that are the main criteria of network design. The main goal of this paper is to evaluate the criteria to design the geodetic network coinciding with the criteria of geometrical strength and high reliability. From this study, the result shows relatively weaker strength in marginal part than the center of network. This indicated that the precision of observation in marginal part is relatively lower than the center.
일본 토호쿠 대지진에 의한 측량 성과의 변동량 보정 방법에 관한 연구
조재명(Cho, Jae Myoung),강성찬(Kang, Seong Chan),윤홍식(Yun, Hong Sik),성우진(Sung, Woo Jin),안기덕(Ahn, Ki Deok),전부남(Jeon, Bu Nam) 한국측량학회 2013 한국측량학회 학술대회자료집 Vol.2013 No.4
2011년 3월 11일에 발생한 일본 토호쿠 대지진은 진도 9M의 대규모 지진으로써 일본지역에서만 최대 약 2.5m의 지각변동량을 발생시켰다. 지리적으로 인접한 우리나라에서도 지각변동량이 발생하였으며, 이로 인하여 각종 측량 기준점들의 위치 변화가 발생하였다. 지각변동에 의한 측량 기준점들의 위치 변화는 각종 측량성과에도 영향을 미치기 때문에 그 변화량을 분석하고 보정할 필요가 있다. 본 연구에서는 일본 토호쿠 대지진 발생 전·후의 우리나라 위성기준점 데이터를 정밀 처리 S/W를 이용하여 분석함으로써 위성기준점들의 위치 변화량을 분석하고, 이로부터 지각변동량 보정 모델을 개발하여 통합기준점의 성과를 보정하였다. 또한 보정된 통합기준점 성과와 실측 성과를 비교함으로써 지각변동량 보정 모델의 정확도를 평가하였다. Japan Tohoku Earthquake of 9.0 magnititude was occurred the crust distorting of up to about 2.5m on March 11, 2011. Becaused of the Tohoku Earthquake, various reference points has changed position in the korea. Variations in location of surveying reference points by crust distorting have to analyze variations about impact of earthquake. In this study, we calculated the absolute and relative amount of movement of the GPS permanent stations using GAMIT/GLOBK software. Finally, we have evaluated the accuracy of the crustal variation of movement model.
TBM-BM 연결수준측량 결과를 이용한 서․남해 연안지역의 수직기준 변환 S/W 개발
정태준(Jeong, Tea Jun),윤홍식(Yun, Hong Sic),장은석(Jang, Eun Seok),성우진(Sung, Woo Jin) 한국측량학회 2011 한국측량학회 학술대회자료집 Vol.2011 No.4
본 연구는 국가수직기준체계의 이원화로 인한 문제점을 해결하기 위하여 육상과 해상 수직기준면 간의 변환모델을 개발하였다. 변환모델 개발을 위하여 서해와 남해 인근 102개소의 TBM-BM점 간의 연결 수준측량 성과를 사용하였으며, 다양한 보간법들을 분석하여 최적의 변환모델링 방안을 제시하였다. 수직기준면 간의 변환모델은 비선형의 4-파라미터 경향성 모델과 최소제곱콜로케이션(LSC) 방법을 조합하여 개발하는 방안이 가장 적합하였으며, 개발된 변환모델에 대하여 25점의 검사점을 이용한 정확도 평가 결과 평균 -0.039m로 계산되었으며, 표준편차는 ±0.148m로 나타났다. 변환 소프트웨어는 GIS 엔진 기반의 GUI프로그램으로 다양한 공간정보 포맷(ASCII 포인트, DXF, SHP, GRID)을 편리하게 변환할 수 있도록 개발되었다. This paper is described for development of vertical datum transformation S/W in the west and south coastal area. The problem of national height system has arisen from difference vertical datum on land and in marine areas. To solve this problem developed vertical datum transformation S/W using TBM-BM leveling data in the west and south coastal areas. We analyze various interpolation methods in order to propose modeling method for TBM-BM offsets. Accuracy analysis of transformation model was done by check points. The result showed that the bias and standard deviation computed from 25 check points was -0.039±0.148m. Transformation S/W can be used to convert datums using various spatial-information format(ASCII, DXF, SHP, GRD).