http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임의의 표본상호상관함수와 비정규확률분포를 갖는 다중 난류시계열의 디지털 합성방법을 이용한 풍속데이터 시뮬레이션
성승학,김욱,김경천,부정숙 한국대기환경학회 2003 한국대기환경학회지 Vol.19 No.5
A method of synthetic time series generation was developed and applied to the simulation of homogeneous turbulence in a periodic 3-D box and the hourly wind data simulation. The method can simulate almost exact sample auto and cross correlations of multiple time series and control non-Gaussian distribution, and one-direction anisotropy on homogeneous structure were studied by investigating the spatial distribution of turbulence kinetic energy and enstrophy. An hourly wind data of Typhoon Robin was used to illustrate a capability of the method to simulate sample cross correlations of multiple time series. The simulated typhoon data shows a similar shape of fluctuations and almost exactly the same sample auto and cross correlations of the Robin.
주기적 기후 특성을 고려한 합성 매시 풍속 자료를 기초로 한 최대풍속예측에 관한 연구
성승학,부정숙,김경천,김욱 한국풍공학회 2003 한국풍공학회지 Vol.7 No.1
최대 풍속치 추정을 위하여 지역적 기후특성을 고려한 가상의 장기 매시풍속 데이터를 생성하였다. 본 연구는 극대치이론을 기반으로 하는 기존의 최대풍속 예측방법의 보완으로 시도된 방법으로 재현 주기가 긴 최대풍속을 예측하는데 효과적이다. EARPG(1)/UPS를 이용하여 선행연구에서 사용된 Markov chain model이 갖는 문제를 개선하고 자기상관함수 뿐 아니라 동시에 비정규확률분포를 재현하는 시계열을 생성하여 최대풍속을 예측하였다. 지역적 기후특성이 다른 한반도 7개 도시를 선택하여 매시풍속데이터 시뮬레이션의 목표로 사용하였다. 실제의 매시 데이터와 유사한 특성을 재현함으로서 더욱 안정적으로 정확한 최대풍속을 추정할 수 있는 장점이 있으며 기존의 극대치이론에 의한 결과와 차이를 비교 분석하였다. Artificial hourly mean wind speed time series are generated to estimate extreme wind speeds. The extreme wind was selected out of the long-term hourly data of a given return period and the process is repeated until a stable result is obtained. The generation is performed using EARPG(1)/UPS which simulates not only the autocorrelation function but also non-Gaussian statistics. The generation method is based on Fourier representation of time series. As a target, hourly 10-minute mean observation data are used for 7 cities in Korea. It is expected that the more realistic long-term data could provide the more reliable estimation procedure and the comparison amount to a validation of the conventional extreme value analysis based on relatively short-term extreme data.
성승학,김동건,윤순현,이종민,이명재 한국풍공학회 2006 한국풍공학회지 Vol.10 No.1
컨테이너 크레인에 대한 풍하중 분포를 조사하기 위하여 대기경계층풍동에서 풍압실험이 수행되었다. 본 풍압실험의 목적은 크게 두 가지로서 (1)구조해석을 위한 입력 풍하중 데이터, (2)전산유동해석을 위한 표면압력분포 데이터를 확보하기 위한 것이다. 1/70으로 축소된 모형에 464개의 압력공을 설치하여 표면 압력 분포를 구하였다. 국부적인 지점의 압력값 으로부터 표면위의 평균 풍하중을 산정하기 위하여 직육면체의 모형을 제작하여 면의 경사도에 따른 압력값과 하중값의 비를 실험적으로 구하였다. 크레인형상의 특성과 관련하여 레이놀즈수의 영향, 압력튜브시스템의 설계 등에 관하여 논의한다. A pressure model test was performed to estimate static wind load distributions on the crane. The purpose of the test is two folds. One is to obtain an wind loading data for finite element structural analysis of the crane and the other is to provide a surface pressure data for computational fluid dynamics modeling study. The 1:70 scale pressure model was used for several wind directions at simulated atmospheric boundary layers in a wind tunnel. A total of 464 pressure taps were used. They are almost uniformly distributed over the surface in order to study static wind loading on local components as well as an entire model. In order to estimate the wind load over a surface from the measured pressures at local points, correlations were investigated between the local value and the area-averaged value using a supplementary simple prismatic model. Some modeling issues including Reynolds number effects and a tubing system design for the model having slender bodies and fine structures are discussed.
5-Head Router Machine 의 이면 구속 공구 시스템
성승학(S. H. Seong),이득우(D. W. Lee),이채문(C. M. Lee),백효정(H. J. Baek),옥주선(J. S. Oak),최운집(U. J. Choi) 한국정밀공학회 2004 한국정밀공학회 학술발표대회 논문집 Vol.2004 No.10월
This paper presents a general description of single and dual contact tooling systems, finite element analysis, and discussions on the application of the system to the 5-head router machine which is in particular for aerospace components. This study has been performed as part of the development of the new generation 5-head router machine which is designed for high productivity. Such high productivity in essence requires high speed rotation and multiple spindles in one machine. The high speed rotation may exceed a range in a conventional single contact tooling system. The conventional tooling system is reevaluated in comparison with the dual-contact system. Finite element analysis using simplified spindle models compares major differences in the two systems. Some problems in the application to the 5-head router machine are discussed.