
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.


졸-겔 합성에서 pH 및 건조온도가 Zn<sub>2</sub>SiO<sub>4</sub>:Mn,Al 녹색 형광체의 발광특성에 미치는 영향
성부용,한정화,박희동,Sung, Bu-Yong,Han, Cheong-Hwa,Park, Hee-Dong 한국세라믹학회 2005 한국세라믹학회지 Vol.42 No.5
In order to improve the performance of green emitting phosphors for plasma display panel, the $Zn_2SiO_4:Mn,Al$ phosphors were synthesized using sol-gel technique and studied using SEM and VUV photoluminescence spectrometer. pH values of the starting solutions (pH = 0.5$\~$2.34) were controled by HCl as the catalysis of hydrolysis and wet gels were dried at $80^{\circ}C$ and $120^{\circ}C$, respectively. We investigated the effects of pH and drying temperatures during sol-gel processes. The results indicated that the phosphor prepared at pH = 1 showed the maximum emission intensity in both drying conditions and the effect of pH of the starting solution on morphology were increased with particle size as HCl and phosphor dried at high temperature showed more spherical and smaller particles than at low.

Zn$_2$SiO$_4$:Mn 녹색형광체의 입도제어 및 발광특성
성부용,정하균,박희동,Seong, Bu-Yong,Jeong, Ha-Gyun,Park, Hui-Dong 한국재료학회 2001 한국재료학회지 Vol.11 No.8
In order to improve the optical Performance of green emitting phosphor for plasma display panel (PDP) application, the wet chemical method for preparing $Zn_{2-x}$ $SiO_4$:xMn (xi=0.02. 0.08) phosphor was designed. The spherical phosphor particles were obtained and the size can be between 0.5$\mu\textrm{m}$ and 2$\mu\textrm{m}$. The formation of phosphor, which had the willemite structure, was completed at relatively low temperature of 108$0^{\circ}C$. Also, photoluminescence Properties of the phosphors prepared were investigated under vacuum ultraviolet excitation. In particular, the emission intensity of Zn$_2$SiO$_4$:0.08Mn phosphor having the 1$\mu\textrm{m}$ of particle size was higher than that of commercial phosphor by 40%. The decay time of zinc silicate powder prepared as containing 8 mole% of manganese has been measured as 7.8ms.
구연산법에 의한 혼합전도성 막의 제조 및 산소투과 특성
성부용,박정훈,김종기,윤여일,백일현 한국화학공학회 2007 화학공학의이론과응용 Vol.10 No.2
페로브스카이트 구조를 갖는 혼합전도성 산화물은 고온에서 산소 이온과 전자의 매질 내 전달과정을 가지고 있어 많은 전기화학분야에 응용되고 있다. 특히 산소 이온 전도도가 높은 물질은 산소 분리막으로 사용하기 적합하여 폭넓게 연구되고 있다. 본 연구에서는 AA``BB``O3형태의 복합산화물 중 La1-xSrxCo1-yFeyO3-δ(X=0.4,Y=0.8) 산화물을 산소 분리막의 재료로 선택하여 구연산법으로 합성하였다. 제조된 분말의 특성은 XRD와 SEM을 이용하여 페로브스카이트 화학상의 형성 여부 및 분말의 미세구조를 확인하였다. 또한 공기중의 산소를 분리하기 위하여 분리막 반응기를 이용한 실험을 하였으며 막을 통과한 고농도의 산소를 갖는 기체는 molecular sieve 5A 컬럼과 TCD를 장착한 기체 크로마토그래피로 분석하였다. 구연산법으로 제조된 원반형 분리막의 두께를 1.0~2.0mm로 조정하여 750~950℃의 온도범위에서 산소투과도를 측정하였다. 온도에 따른 산소투과도는 온도 증가에 따라서는 증가하였으며, 두께에 따라서는 반비례하였다. 950℃에서 1mm의 두께를 갖는 분리막은 2mm보다 51%이상 증가된 산소투과량을 보였다. 두께가 0.1mm인 분리막은 750℃보다는 950℃에서 투과량이 96%증가하였다. 구연산법으로 제조한 경우 고온소성법으로 제조한 경우보다 산소분리능이 뛰어났다.

고발광 ${Zn_2}{SiO_4}$:Mn 형광체의 제조 및 특성
성부용,정하균,박희동,김대수 한국세라믹학회 2000 한국세라믹학회지 Vol.37 No.8
In order to improve luminescence prperty of phosphors, we have synthesized Zn2SiO4:Mn phosphors by a new chemical synthetic route, i.e., the homogeneous precipitation method. This method has featured that the formation of phosphoris completed at relatively low temperature of 105$0^{\circ}C$ and the particle morphology exhibits spherical shape to be well-dispersed and uniform size. At all the Mn concentration explored, phosphors prepared by this method have exhibited the improved emission intensities. In particular, the emission intensities of phosphors with Mn doping contents between 1 at% and 3.5 at% were higher about 40% than that of commercial phosphor. On the other hand, the decay time has been decreased from 23 ms to 11 ms with increasing Mn concentration. In addition, the phosphor composition containing 3 at% Mn has displayed the most saturated color.
수열합성법을 이용한 LSCF 복합 Perovskite 분말 제조
윤여일,성부용,박정훈,김종기,백일현 한국화학공학회 2007 화학공학의이론과응용 Vol.10 No.2
산소 분리를 위한 무기막 제조 공정의 원료로 사용하는 복합페로브스카이트 분말은 다양한 방법으로 제조 가능하다. 본 연구에서는 산소제조 공정에 세계적으로 가장 많이 사용하며 성능이 우수하다고 알려진 여러가지 복합 페로브스카이트 화합물 중 La1-xSrxCo1-yFeyO3-δ(x=0.4, y=0.8)를 선정하여 수열합성법으로 분말을 제조하였다. 액상 합성법은 고상 합성법과 비교할 때 분말의 순도가 높고 입자의 크기가 작고 입자 크기의 분포가 좁은 장점이 있는 반면 복잡한 공정을 거쳐야 하는 단점을 가지고 있다. 현재까지 액상합성법은 졸겔법, 공침법이 주를 이루었으나 이 방법은 morphology control이 어려운 단점이 있다. 그러나 수열합성법을 이용할 경우 99.5% 이상의 순도를 가지며 최종 생성물 입자 크기가 1 마이크로미터 이하의 크기를 가지므로 밀링 공정이 필요하지 않다. 본 연구에서는 수산화 란탄, 수산화 스트론튬, 수산화 코발트, 수산화철을 이용하여 pH 조절및 구성 이온의 농도 조절과 물질들의 용해도를 조절함으로써 복합 페로브스카이트 분말을 합성해보았다. 합성된 분말은 상등액의 ICP, 최종 생성물의 XRD 분석, 입자 크기 및 분포 분석을 통하여 생성물의 합성 여부 및 특성을 분석하여보았다. 또한 고온 소성법을 이용하여 제작한분말과 특성을 비교 분석하여보았다.

졸-겔법에 의한 $Zn_2$$SiO_4$:Mn, Al 녹색 형광체의 제조 및 발광 특성
박희동,성부용,한정화,김대수 한국세라믹학회 2001 한국세라믹학회지 Vol.38 No.4
PDP(Plasma Display Panel)용 녹색 형광체인 Zn$_2$SiO$_4$:Mn에 채-dopant로 Al을 첨가하여 졸-겔법으로 합성하였다. 졸-겔법으로 제조한 형광체는 기존의 고상 반응에 의해 합성된 경우보다 낮은 온도(1000-110$0^{\circ}C$)에서 Zn$_2$SiO$_4$단일상을 형성하였으며, 300-500nm의 비교적 균일한 입자를 얻을 수 있었다. 또한, co-dopant인 Al을 첨가함으로써 발광휘도를 향상시키고, 전광시간을 줄일 수 있었다. 한편, TEOS의 가수분해시 $H_2O$/TEOS 비율을 조절하여 발광의 최적 조건을 조사하였다.
생체 건조용 대형 저온진공건조기의 열적 특성에 관한 연구
김경근,성부용,정한식,최순열,문수범 한국마린엔지니어링학회 2000 한국마린엔지니어링학회지 Vol.24 No.4
In tradition, there have been two kinds of drying methods, which are sun drying and artificial drying. The sun drying method which has been adopted traditionally has been replaced by the hot-air drying method which is one of the most general methods of artificial drying, with its simple drying system, low initial cost of drying plant, and easy operating method. But the hot-air drying method has some defects; (1) much energy loss happens due to the discharge of hot air during the drying process, (2) control of drying rate is not easy on account of changing relative humidity of inlet air for uniform hot air temperature, (3) high temperature of foods in drying process brings about the production of low-grade drying products. Vacuum drying takes advantage of energy saving and mass production because it reduces the drying time by increasing the drying rate under low temperature condition. The aim of this paper is to develop the low temperature vacum dryer, with low initial investments and operating costs, easy operating method and trouble-free operation.