http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
단신 : 액상법에 의한 가시광감응성 티타니아 나노튜브의 제조
이현미 ( Hyun Mi Lee ),소원욱 ( Won Wook So ),백진욱 ( Jin Ook Baeg ),공기정 ( Ki Jeong Kong ),문상진 ( Sang Jin Moon ) 한국화학공학회 2012 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.50 No.1
TiCl4와 히드라진/암모니아수를 사용하여 졸겔 및 강알칼리 수열합성법의 신규 2단 합성법을 통해 N도핑된 TiO2 나노튜브를 제조하였다. 제조된 나노튜브는 튜브형상의 손상이 없이 10 nm 전후의 직경과 3 nm 이하의 벽두께를 가지며, 잘발달된 아나타제 결정상을 나타내었다. 또한 N이 도핑되어 일반 도핑되지 않은 TiO2 나노튜브와 아나타제상입자에 비해 각각 ~35 nm, ~25 nm 정도 적색편이 된 우수한 가시광 흡수능과 노란색 색상을 보여 주었다.
제올라이트 Beta, USY, Mordenite 촉매를 이용한 Methylnaphthalene의 트랜스메틸화 반응
박중남 ( Jung Nam Park ),박용기 ( Yong Ki Park ),백진욱 ( Jin Ook Baeg ),홍석인 ( Suk In Hong ),이철위 ( Chul Wee Lee ) 한국화학공학회 2005 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.43 No.5
1-methylnaphthalene(1-MN)과 2-methylnaphthalene(2-MN) 사이에서의 트랜스메틸화 반응을 제올라이트, H-mordenite (HM), H-Beta(Hb), H-USY(HUSY) 촉매를 이용한 고정층 반응기에서 수행하였다. Hb25(SiO2/Al2O3=25) 촉매는 다음과 같은 조건, 반응온도 350˚C, 반응압력 1.5Mpa, 전체 액상 반응물의 WHSV 2.7gfeed/gcat · h, 반응물 1-MN과 2-MN의 몰비 1:1, 반응 1시간에서 2-MN/1-MN 비=2.3와 2,6-DMN/2,7-DMN 비=1.3을 보이면서 다른 촉매보다 높은 전환율과 안정성을 나타내었다. 촉매의 세공구조, 산성도와 관련하여 촉매성능을 해석하였다. Catalytic performances of zeolite catalysts such as H-mordenite (HM), H-Beta (Hb), H-USY (HUSY) for the transmethylation between 1-methylnaphthalene (1-MN) and 2-methylnaphthalene (2-MN) were investigated in a fixed-bed flow reactor. Hb showed higher and more stable conversion than others to exhibit a high and stable 2-MN/1-MN ratio of 2.3 and 2,6-DMN/2,7-DMN ratio of 1.3 at the 1st hour of time on stream under the reaction conditions as follows: reaction temperature of 350˚C, reaction pressure of 1.5 MPa, WHSV of 2.7gfeed/gcat·h and the molar ratio of 1-MN and 2-MN of 1:1. The catalytic behavior has been discussed in relation with the catalyst pore structure and acidity.
沈相喆,白振旭 경북대학교 산업기술연구소 1988 産業技術硏究誌 Vol.16 No.-
The reaction of 2-methyl-3-butyn-2-ol with secondary amine in the presence of a catalytic amount of lanthanide chloride in acetonitrile at 160℃ for 8 hr gave the corresponding 1, 1-dimethyl-2-oxopropyl N, N-dialkylcarbamate in reasonable yield with a small amount of N, N-dialkylacetamide under 20 atm of carbon dioxide. The yield of 1, 1-dimethyl-2-oxopropyl N, N-dialkyl carbamates depends of the catalyst. In the case of 1, 1-dimethyl-2-oxopropyl N, N-hexa-methylene carbamate, CeCl_3 gave 38% yield, but NdCl_3, CdCl_3, and PrCl_3 gave 20%, 22% and 27% yield, respectively.