http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백종승,강춘식,Loper, C. R.,Perepezko, J. H. 대한금속재료학회(대한금속학회) 1982 대한금속·재료학회지 Vol.20 No.11
熔融狀態의 合金을 急冷(10^6℃/sec)方法을 利用하여 凝固시킬때 자주 觀察되는 非平衡狀態의 獨特한 顯微鑛組織은 高度의 過冷却現象이 結晶質의 核生成過程에서 關係되였음을 나타낸다. 따라서 過冷却現象이 高速凝固過程에 미치는 基本過程을 硏究하기 爲한 Model approach로 徐冷條件 (10∼30℃/min)에서도 高度의 過冷却現象 (0.3∼0.4 Tm)을 얻을 수 있는 Droplet Emulsion Technique이 低融點金屬에 導入되었다. Droplet Emulsion Technique의 應用은 高度의 過冷却狀態에서 작은 droplet를 (10∼20μ)을 빠른 速度로 凝固시켰을때, 急冷方法을 使用했을 때와 같은 準平衡相들의 形成이 可能함을 보여 줄 뿐만 아니라 이러한 準平衡相들의 核生成過程을 組織的으로 檢討할 수 있는 初期 固溶體를 觸媒로 한 非均一核生成實驗을 可能케 해 주었다. 이러한 實驗結果에 따라 金屬粉末裝置에 高速凝固方法이 應用된다면 粒子精製(grain refinement) 效果뿐만 아니라 核生成過程에서 顯微鏡組織의 發達을 調節함으로써 顯微鏡組織의 形態變形이 可能하여 優秀한 物理的性質을 갖인 새로운 金屬材料의 開發이 可能함이 밝혀졌다. 더 나가서, droplet方法에 依한 液體金屬의 過冷却實驗은 高速凝固過程 뿐 아니라 在來式 鑄物方法에서 일어나는 凝固過程을 糾明하는데에도 基凝的인 資料가 된다고 믿어 진다. A droplet emulsion technique which allows a deep undercooling (0.3-0.4Tm) at slow cooling rate (10-30℃/min) has been applied as a model approach to study the basic solidification mechanisms associated with rapid solidification processing. When a liquid metal is undercooled substantially, the crystal growth following nucleation will be rapid regardless of the cooling rate. Often, the usual solidification reactions can be suppressed at high undercooling by the formation of metastable solid solutions, intermediate phases and in some cases amorphous solids. The kinetic phase selection mechanism has been examined by a controlled nucleation catalysis experiment in which the primary solid solution is established as one type of suitable catalytic site for the generation of metastable phases during nucleation. Phase selection promoted by undercooling and known nucleation catalysis reactions provides numerous possibilities for nucleation controlled structure modification. This indicates that rapid solidification powder processing not only has a valuable potential for grain refinement, but also has extensive possibilities for microstructural modification.
백종승,임기원,최용문 대한기계학회 1990 대한기계학회논문집 Vol.14 No.1
본 연구에서는 지금까지 개발된 각종 소형 푸루버의 작동원리 및 장단점을 분 석 비교한 결과에 따라 이중 실린더형의 소형 푸루버를 직접 설계 제작하고, 개발된 소형 푸루버를 사용하여 펄스 주기 변동특성이 각각 다른 유량계를 대상으로 펄스보간 오차 시험을 실시하였다. 실험결과는 통계적 방법을 도입하여 분석함으로써 유량계 각각에 대하여 기대 검증 정확도 수준을 선정하였다. 또 기대검증 정확도가 좋지 않 게 예상되는 유량계에 대해서는 검증 정확도 향상 방안을 제시하였다. Leaks at the piston seal and the by-pass port of a small volume prover have relatively large influence on the proving accuracy in comparison with a conventional ball prover. The pulse interpolator, which is to increase the discrimination, is affected by the characteristic of the flowmeter signal. In this study, a small volume prover of the double cylinder type was designed in order to study the pulse interpolation error as well as the leak error. The basic volume of the prover determined by a water draw method was about 9.68L. Experimental results revealed that interpolation data attained by the repeated piston pass for turbine meters at a fixed flowrate may be treated effectively by applying a statistical method. It was possible to limit the pulse interpolation error less than .+-. 0.02% at the 95% confidence level. However, in the case of the bulk meter, if failed to achieve the required repeatability level because of the pulse characteristics. The basic volume change appeared to be independent of the piston velocity within the .+-. 0.05% of tolerance.
박경암,백종승 대한기계학회 1991 大韓機械學會誌 Vol.31 No.6
유량측정 정확도를 1-2% 정도 원하는 경우 ISO, AGA 등 규격서에 제시한 직관부 길이나 flow strainer를 설치하면 얻을 수 있으나 측정 정확도를 더욱 향상시키기 위해서 최소 직관부길이, straightener의 설계 개선과 최적설치 위치에 관한 연구와 규격보완을 위한 연구가 진행중이다. 현장에서 유량계를 교정할 수 있는 검증시스템으로 석유특유의 경우에 푸루버가 사용되고 있으나 현장 검증시스템의 용량과 측정 정확도의 향상을 위한 연구가 진행중이고, 천연가스의 경우에는 EC에서 소닉노즐 뱅크를 제작하여 시험중에 있다.