http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스파크점화 엔진에서 천연가스와 수소의 희박연소 성능 비교
박현욱,이준순,오승묵,김창업,이용규,강건용,Park, Hyunwook,Lee, Junsun,Oh, Seungmook,Kim, Changup,Lee, Yonggyu,Kang, Kernyong 한국분무공학회 2021 한국액체미립화학회지 Vol.26 No.4
Lean combustion performance of natural gas and hydrogen was compared in a spark-ignition engine. The lean combustion engine operation with natural gas was limited due to combustion instability at an excess air ratio (EAR) above 1.8. The total hydrocarbon (THC) emissions increased significantly with increasing EAR. The nitrogen oxides (NO<sub>X</sub>) emissions were also high due to the limitation of increasing EAR. The lean combustion engine operation with hydrogen showed superior combustion stability as well as low THC and NO<sub>X</sub> emissions, even at high EARs. However, boosting technology was required to reach the high EARs.
수소의 혼합 비율에 따른 수소/디젤 혼소 엔진의 연소 및 배기 특성 파악
박현욱(Hyunwook Park),배충식(Choongsik Bae) 한국연소학회 2014 KOSCOSYMPOSIUM논문집 Vol.2014 No.11
The effects of hydrogen (H₂) ratio on combustion and emission characteristics in a H₂/diesel dual-fuel engine were investigated. Dual-fuel strategy was applied to improve the control of combustion phasing. The combustion phasing was retarded with increasing H₂ fraction. This can be explained by both reduced diesel concentration and chemical effect of H₂, which reduce the heat release rate during the low temperature reaction stage. Hydrocarbon and carbon monoxide emissions of the engine were decreased drastically when H₂ ratio was increased.
합성가스 스파크점화 과급 엔진에서 희박 연소를 통한 열효율 및 배기 개선
박현욱 ( Hyunwook Park ),이준순 ( Junsun Lee ),나랑후잠스랑 ( Narankhuu Jamsran ),오승묵 ( Seungmook Oh ),김창업 ( Changup Kim ),이용규 ( Yonggyu Lee ),강건용 ( Kernyong Kang ) 한국분무공학회 2021 한국액체미립화학회지 Vol.26 No.1
Lean combustion was applied to improve the thermal efficiency and emission in a single-cylinder, spark-ignition engine fueled with syngas. Under naturally aspirated conditions, the lean combustion significantly improved the thermal efficiency compared to the stoichiometric combustion, mainly due to the reduction in heat transfer loss. Intake air boost was applied to compensate the low power output of the lean combustion. The gross indicated power of 24.8 kW was achieved by increasing the intake pressure up to 1.6 bar at excess air ratio of 2.2. The nitrogen oxides showed near zero level, but the carbon monoxide emission was significant.