퉁퉁마디를 가해하는 퉁퉁마디뿔나방 Scrobipalpa salinella (Zeller) (나비목, 뿔나방과)의 재발견 및 피해

박진영,박규택,Park, Jin-Young,Park, Kyu-Tek 한국응용곤충학회 2008 한국응용곤충학회지 Vol.47 No.4

전남 신안군의 퉁퉁마디 재배지에서 대 발생하여 피해를 초래한 해충이 뿔나방과의 Scrobipalpa salinella (Zeller)로 확인되었다. 본 종은 Park & Ponomarenko (2006)에 의해 국내에서 처음 보고된 바 있다. 그러나 동정이 어려운 암컷 한 개체를 대상으로 하였으며, 염생식물이 없는 산간지역에서 발견된 점 등으로 분포에 대한 의문점이 상존해 왔었으나 금번 조사결과로 국내 분포가 재 확인되었다. 종의 분류동정을 위한 성충과 생식기의 사진 제공과 함께 유충의 발생 및 피해에 대해 조사된 내용을 기술하였다. In a cultivated field of Salicornia europae in the Jeonam Province, Korea, Scrobipalpa salinella (Lepidoptera, Gelechiidae) which feeds and leads to a serious damage was found. The discovery of this species is to reconfirm its distribution in Korea because the first report by Park and Ponomarenko (2006) was based on a single female and it was collected in a montane area far from seaside where its host plants, halophytes, are planted. For identification, photos of imago and genitalia are given, and the damage by larvae on Salicornia europae are noted.

국부가압 다이캐스팅 공정에서 3차원 유동 및 응고해석을 통한 자동차 변속기 Gear Housing의 주조방안 설계 최적화

박진영,김억수,박용호,박익민,Park, Jin-Young,Kim, Eok-Soo,Park, Yong-Ho,Park, Ik-Min 한국재료학회 2006 한국재료학회지 Vol.16 No.11

In the partial squeeze casting process, the filling behavior of liquid metal and solidification pattern in thick area have significant influence on the quality of casting products and die life. For the optimal casting design of automobile transmission gear housing, various analyses were performed in this study by using computer simulation code, MAGMAsoft and the simulation results were compared and analyzed with experimental results. By air pressure criteria, internal porosities caused by air entrap during the mold filling were predicted and reduced remarkably by modification of gating system. Also, optimal squeeze-time lag to apply partial squeeze pin in thick area was calculated and the castings was free from shrinkage defects with the result of solidification analysis. Consequently, casting design for automobile transmission gear housing was optimized and approved by Computer Tomography.

진동 자극 유무에 따른 호흡 저항 훈련 시 폐 기능과 호흡근의 즉각적인 차이가 있을까?

박진영,김예슬,박현주,이명모,Park, Jin-Young,Kim, Ye-Seul,Park, Hyun-Ju,Lee, Myung-Mo 대한물리치료과학회 2018 대한물리치료과학회지 Vol.25 No.3

Purpose: The purpose of this study was to investigate the effect of whole body vibration combined breathing resistance on lung capacity and respiratory muscle and to suggest a mediation method for improvement of respiratory function and lung function in the future. Methods: This study was a preliminary study design of two groups of 54 healthy young adults who were randomly assigned to an experimental group (n=27) with core exercise combined with respiratory resistance and whole body vibration and a control group with respiratory resistance and core exercise (n=27). All interventions consisted of 6 core exercises every 40 seconds and rest for 20 seconds. To compare the effects of intervention, we measured spirometry and respiratory muscle strength. Results: Both the experimental group and the control group showed a significant increase in Forced vital capacity (FVC) and Maximum voluntary ventilation (MVV) (p<.05). However, FEV1 and FEV1% were significantly increase only in the experimental group (p<.05). FVC, FEV1%, Maximum Inspiratory Pressure (MIP), Maximum Expiratory Pressure (MEP) showed more significant increase in the experimental group than the control group. Conclusion: These findings indicate that whole-body vibration combined breathing resistance is an effective intervention for people, with FVC, FEV1%, MIP, MEP increase.

Al고압주조공법에서 사출슬리브 온도 조절을 통한 Chill layer의 최적 제어

박진영,김억수,박용호,박익민,Park, Jin-Young,Kim, Eok-Soo,Park, Yong-Ho,Park, Ik-Min 한국재료학회 2006 한국재료학회지 Vol.16 No.11

In this study, the effect of chill layers occurred in shot sleeve on the molten metal filling was analyzed through computer simulation. The behavior of chill layers with temperature variation of shot sleeve set from 200 to $280^{\circ}C$ was also investigated. The simulation results showed the chill layers set in the in-gates during the injection process change the main filling direction and cause turbulent flow pattern, resulting in porosities inside the castings. The amount of chill layers with the increasing temperature of shot sleeve was considerably reduced. Particularly, at the setting temperature of $280^{\circ}C$ by heat control unit, the biggest reduction in chill layers, excellent trimmed surface and the highest density were achieved, suggesting that as the optimal sleeve condition in aluminum high pressure diecasting, especially for highly complex parts like valve body.

아동기에 주의력결핍 과잉행동증상을 경험한 성인의 정신병리와 기질 성격 요인

송열매(Yul-Mai Song),이건석(Kounseok Lee),한덕현(Doug Hyun Han),이영식(Young Sik Lee),민경준(Kyung Joon Min),박진영(Jin Young Park),김준원(Jun Won Kim) 대한소아청소년정신의학회 2013 소아청소년정신의학 Vol.24 No.4

Objectives:The objective of this study is to find out the differences in psychopathology, temperament, and character factors between young adults with and without childhood attention-deficit hyperactivity disorder (ADHD) symptoms. Methods:The subjects consisted of 314 university students (male=72, female=242) in Gongju. They were divided into childhood ADHD group (N=54) and normal group (N=260) to the Wender-Utah Rating Scale. Participants were assessed using Korean Adult ADHD Scale, Beck Depression Inventory-II, Beck Anxiety Inventory, Kimberly Young’s Internet Addiction Test, Barratt Impulsiveness Scale, Paranoia Scale, Korean-Schizotypal Ambivalence Scale, Lubben Social Network Scale, and Temperament and Character Inventory-Revised. Descriptive statistics, t-test, chi-square, spearman correlation, and stepwise multiple regression were applied to analyze the data. Results:Participants with childhood ADHD symptoms had high level of adult ADHD symptoms (p<.001), impulsiveness(p=.001), depression (p<.001), anxiety (p<.001), internet addiction (p<.001), paranoia tendency (p<.001) and low level of selfesteem (p<.001) compared to normal group. Self-directedness (p<.001) was lower, Harm avoidance (p=.001) and Self-transcendence (p=.029) were higher in the childhood ADHD group. In correlation and stepwise multiple regression, childhood ADHD symptoms were significantly associated with cooperativeness (r=-0.515 and β=-0.547, p<.001 respectively). Conclusion:This result showed that young adults with childhood ADHD symptoms had various forms of psychopathology and childhood ADHD symptoms were influenced by character such as cooperativeness. Therefore, more thorough evaluation regarding childhood ADHD symptoms is needed.

상완골 근위부 골절의 수술적 요법

박진영,박희곤,Park Jin-Young,Park Hee-Gon 대한정형외과스포츠의학회 2003 대한정형외과스포츠의학회지 Vol.2 No.2

근위 상완골 골절은 골절의 형태에 따라 크게 관절편 또는 해부학적 경부, 대 결절, 소 결절, 상완골 간부 또는 외과적 경부의 4개의 골절편으로 나눌 수 있다. 현재 널리 사용되고 있는 Neer의 근위 상완골 골절의 분류는 골절선에 의해 골절편을 나누는 분류가 아니며, 1 cm이상전이나 45$^{\circ}$ 이상의 각형성 이 있는 경 우를 전 이 골절편으로 생각하였다. 골절에 대한 관혈적 정 복 및 내고정술의 일차적 적응증은 골다공증이 없는 젊은 환자에서 발생된 튼튼한 내고정물을 시행할 수 있는 삼분 골절로 만족할 만한 결과를 위해 술후 오랜 기간동안 시행할 재활치료에 잘견딜수 있는 활동력 이 좋은 환자여야 한다. 수술적 치료의 절대적 적응증은 개방성 골절 ,혈관이 나 신경 손상이 동반될 때 , 정복이 불가능한 골절 탈구등이다. 반대로 환자가 골다공증이 심하거나, 근위 상완 골절편의 분쇄정도가 심하며 , 튼튼한 내고정을 시행할 가능성 이 희박한 나이가 많은 경 우에는 관혈적 정복 및 내고정술보다 일차적 인공삽입물을 이 용한 관절성형 술을 시행한 후 조기 재활 치료를 시행하는 것을 고려할 수 있다. 상완골 근위부 골절의 수술적 요법에는 다양한 수술 기법과 이에 따른 여러 합병증이 발생할 수 있으며 지속적 이고 체계적 인 재활 치 료가 꼭 필요하다. 여러 수술 기 법 중 관혈적 정복 및 장력 대 강선 기법을 시행할 때 만족할 만한 결과를 얻 을 수 있다. 이 방법 은 수술적 기법이 어렵지 않고, 골에 대한 고정과 함께 회전근 개의 건부착 부위에 대한 봉합을 추가할 수 있으나 역시 여러 가지 합병증이 있으므로 골절의 양상이 나 환자의 상태 ,환자의 활동력 등을 고려하여 치료 방법을 결정하여야 할것으로 사료된다.EX>46N으로, 슬개건-티타늄 간섭나사군이평균 1067.4$\pm$145N에서평균 601.8$\pm$134N으로, 슬개건-생체흡수성간섭나사군이평균 987.1$\pm$168N에서588.7$\pm$124N으로각각40$\%$, 39$\%$, 50$\%$, 24$\%$, 44$\%$, 40$\%$가감소하였다. 결론: 수술후초기고정력은슬괵건을LA나사(R) 또는Semifix(R)로고정하는방법과슬개건을티타늄및생체흡수성간섭나사로고정하는방법등이우수하였으며, 슬괵건을생체흡수성간섭나사나Endobutton(R)으로 고정하는 방법 등은고정력이 상대적으로매우약함을 알수있었다. 최대인장력은단순인장검사로는이상의대퇴골측고정방법의고정력이초기부하를견뎌내는데충분하다고생각되었으나주기성부하실험후현저히감소되어충분한초기안정성을제공하지못함을알수있었다.를 나타내었다. 또한 3m깊이에서의 측방 선량분포에서 Spoiler의 거리변화(6, 10cm)는 심부선량의 변화에 영향을 주지 않는 것으로 확인할 수 있었다. 그리고 위의 실험측정치를 치료계획 시스템에 입력하여 선량분포를 확인한 결과 Spoiler를 사용하는 경우 OPEN에 비해 선량분포 영역을 표면으로 끌어 올릴 수 있으며 Bolus 보다 피부 보호효과는 어느 정도 유지가 되는 것을 보여주었다. 4.결론 이와 같이 Spoiler는 Bolus와 비교하여 6MV 광자선의 build up 영역을 표면으로 증가시키는 동시에 Skin Sparing(피부보호)효과를 유지할 수 있으며 두경부암의 치료에서 Spoiler의 사용이 가능한 조건으로는 조사면이 Fracture about proximal humerus may be classified as the articular segment or the anatomical neck, the greater tuberosity, the lesser tuberosity, and the shaft or surgical neck. Now, usually used, Neer's classification is based on the number of segments displaced, over 1cm of displaced or more than 45 degrees of angulation , rather than the number of fracture line . Absolute indication of a operative treatment a open fracture, the fracture with vascular injury or nerve injury , and unreductable fracture-dislocation . Inversely, the case that are severe osteoporosis, and eldly patient who can't be operated by strong internal fixation is better than arthroplasty used by primary prosthetic replacement and early rehabilitation program than open reduction and internal fixation. The operator make a decision for the patient who should be taken the open reduction and internal fixation, because it's different that anatomical morphology, bone density, condition of patient. The operator decide operation procedure. For example, percutaneous pinning, open reduction, plate & screws, wire tension bands combined with some intramedullary device are operation procedure that operator can decide . The poor health condition for other health problem, fracture with unstable vital sign and severe osteoporosis , are the relative contraindication. The stable fracture without dislocation is not the operative indication . The radiologic film of the prokimal humerus before the operation can not predict for fracture evaluation. It's necessary to good radiologic film for evaluation of fracture form. The trauma serise is better than the other radiologic film for evaluation. The accessary radiologic exam is able to help for evaluation of bone fragment and anatomy. The CT can be helpful in evaluating these injury, especially if the extract fracture type cannot be determined from plain roenterogram of the proximal humerus, bone of humerus head. If the dislocation is severe anatomically , we could consider to do three dimentional remodelling. The MRI doing for observing of bony morphology before the operation is not better than CT If we were suspicious of vascular injury, we could consider the angiography.

도로건설공사 토공작업부에 대한 환경부하 영향인자 분석

박진영,임제규,김병수,Park, Jin-Young,Im, Je-Gyu,Kim, Byung-Soo 한국건설관리학회 2018 건설관리 : 한국건설관리학회 학회지 Vol.19 No.4

건설산업에서 LCA (Life Cycle Assessment)를 활용하여 환경영향을 평가하려는 시도가 점차 증가하고 있다. 그러나 제한된 사업예산과 일정으로 인해 신속한 의사결정을 수행해야 하는 국내 건설산업에서 모든 자재와 에너지를 대상으로 환경부하량에 대한 검토를 수행하는 것은 곤란하다. 따라서 친환경성 확보를 위한 의사결정과정에서 환경부하 저감을 위해 중점적으로 검토가 수행되어야 하는 주요 영향인자와 이를 환경영향평가로 연계할 수 있는 정량화된 정보의 제공이 요구된다. 이 연구에서는 이러한 정보의 제공을 위해 도로건설공사 사례의 LCA결과를 분석하였다. 분석결과 경유, 레미콘, 우레탄계도료, 골재, 아스팔트콘크리트가 도로 토공작업부에서 환경부하량의 93.17%를 발생시키는 주요 영향인자로 조사되었다. 도로 토공작업부 1km를 시공할 때 이들 영향인자에 의해 발생하는 총환경비용은 약 242백만원이며 레미콘과 아스팔트콘크리트의 작업물량 10%를 절감함에 따라 5.02%와 2.28%의 탄소배출량 감축효과를 얻을 수 있다. 두 자원의 탄소배출량 감축을 통해 1km당 약 11백만원의 환경비용을 절감할 수 있는 것으로 분석되었다. 도로 토공작업부의 탄소배출량 감축을 위해서는 레미콘과 아스팔트콘크리트의 사용량을 감소시키기 위한 신공법이나 친환경자재의 적극적인 개발과 도입이 필요할 것으로 판단된다. In the construction industry, attempts to evaluate the environmental impact of products through life cycle assessment (LCA) approach has been on the rise. However, the domestic construction industry needs to make rapid decisions due to limited budget and schedule, so it is difficult to carry out a review of the environmental load on all resources. The decision-making process requires information on the major influence factors that should be focused on to reduce environmental load. And this information should be quantified so that it can be linked to environmental impact assessment. In this study, the LCA results of road construction cases were analyzed to provide such information. As a result, diesel, ready-mixed concrete, urethane-based paint, aggregate, and asphalt concrete were found to be the main factors that generated 93.17% of the environmental load in the earthwork type of road project. The total environmental cost caused by these affecting factors when constructing 1 km of earthwork type of road project is 242 million won. The analysis also shows that a 10% reduction in the amount of ready-mixed and asphalt concretes can reduce carbon emissions by 5.02% and 2.28% while reducing environmental costs by 11 million won per kilometer. In order to reduce carbon emissions of the earthwork type of road project, it is necessary to actively develop and introduce new methods and eco-friendly materials to reduce the overall use of ready-mixed concrete and asphalt concrete.

Full-scale 저경도 납면진받침의 온도의존성에 대한 실험적 연구

박진영,장광석,이홍표,이영학,김희철,Park, Jin Young,Jang, Kwang-Seok,Lee, Hong-Pyo,Lee, Young Hak,Kim, Heecheul 한국전산구조공학회 2012 한국전산구조공학회논문집 Vol.25 No.6

납코어가 삽입된 적층고무받침은 주요 재료가 온도에 대한 의존성을 보유하고 있으므로 온도 환경이 장치의 성능에 미치는 영향이 적지 않다. 따라서, 본 논문에서는 대표적인 면진장치인 납면진받침에 대하여 실규모 장치를 제작하고 온도변화에 따른 강성 및 감쇠 특성변화에 대하여 실험을 통하여 분석하고 평가하였다. 실물 크기의 납면진받침을 사용하여 $-10^{\circ}C$, $0^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, $40^{\circ}C$의 온도 조건에 대하여 ISO22762:2010에서 제시하고 있는 특성시험법을 적용하여 수직강성 및 수평특성에 대하여 의존성 경향을 파악하였다. 또한, 면진받침 설계 시 주요한 평가지표로 사용되는 2차강성 및 특성강도에 대하여 해외 제조사에서 제시하고 있는 온도보정식과 시험결과를 비교하였으며 수직강성에 대한 온도의존 경향을 파악하였다. Rubber laminated bearings with lead core are highly affected by changes in temperature because key materials which are rubber and lead have temperature dependencies. In this study, two full scale LRB(D800, S=5) are manufactured and temperature dependency tests on shear properties are accomplished. The shear properties at the 3rd cycle are used at $-10^{\circ}C$, $0^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, $40^{\circ}C$ respectively. The double shear configuration, simultaneously testing two pieces, is applied for compression shear test in order to minimize the friction effects due to the test machine, described in ISO 22762-1:2010. Characteristic strength, post-yield stiffness, effective stiffness, equivalent damping ratio are estimated and presented coefficient due to the temperature changes.

Revision of Failed Shoulder Instability Repair

박진영,최진형,Park, Jin-Young,Choe, J.H. 대한관절경학회 2006 대한관절경학회지 Vol.10 No.1

소아 복부둔상에 의한 간장손상의 치료

박진영,장수일,Park, Jin-Young,Chang, Soo-Il 대한소아외과학회 1997 소아외과 Vol.3 No.1

A clinical review was done of 31 children with blunt liver injury who were admitted to the Department of Surgery, Kyungpook National University Hospital between 1981 and 1990. Seventeen of the 31 children required laparotomy(11 primary repairs, 4 lobectomies, 2 segmentectomies). There were two deaths after laparotomy, one due to associated severe head injury and another due to multiorgan failure. The remaining 14 children, who were hemodynamically stable after initial resuscitation and who did not have signs of other associated intraabdominal injuries, were managed by nonoperative treatment. Patients were observed in a pediatric intensive care unit for at least 48 hours with repeated abdominal clinical evaluations, laboratory studies, and monitoring of vital signs. The hospital courses in all cases were uneventful and there were no late complication. A follow-up computed tomography of 7 patients showed resolution of the injury in all. The authors believe that, for children with blunt liver injuries, nonoperative management is safe and appropriate if carried out under careful continuous surgical observation in a pediatric intensive care unit.