http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박준오(Park, Jun-Oh),장원권(Jang, Won-Kweon) 한국산학기술학회 2010 한국산학기술학회논문지 Vol.11 No.9
표면탄성파를 이용한 RF소자의 성능을 단순히 작동 유무로만 평가할 수 있는 전기적인 성능 평가방법과 달 리 위치에 따른 표면탄성파의 형성 정도를 실시간으로 검사할 수 있는 광학적 방법을 제시하였다. 광학적 방법을 이 용한 표면 탄성파의 측정 조건과 한계를 제시하였고 간섭 및 회절 현상을 이용하여 RF신호의 입력 유무에 따른 광학 적 해석을 하였다. 단일 모드 레이저를 이용하여 중심 주파수가 105MHz인 중계기 필터의 동작을 실험적으로 측정하 고 이론적으로 분석하였다. 본 논문에서는 다기능 서비스를 제공하는 복합 주파수 RF 모듈의 고품질화를 위한 방법 으로 표면탄성파의 에너지 분포를 시각화하고 실시간으로 평가할 수 있는 광학적 방법을 제시하였다. Unlike the electric method capable of checking only product defect, the real time optical metrology is suggested for measuring and visualizing vibration with respect to position of surface acoustic wave in RF device. The measuring limits and conditions for surface acoustic wave is given, and the interference and diffraction due to RF signal are analyzed by optical interpretation. A single mode laser and a 105MHz-center-frequency repeater filter were employed for experiments and theoretical analysis. In this paper, the optical metrology providing visual energy distribution and real time inspection for surface acoustic wave is proposed for development of high quality multi-service and multi-frequency RF module.
3차원 모델링 데이터 가시화 효율성 향상방안에 관한 연구
박준오(Park Jun oh),안응식(Ahn Eung Sik),이윤(Lee Yun) 대한공간정보학회 2010 한국지형공간정보학회 학술대회 Vol.2010 No.3
최근 3차원 기술의 발전으로 도시를 구성하는 시설물을 3차원으로 가시화하고 관리하는 기술이 주목받고 있다. 3차원 도시 시설물 관리를 위해서는 3차원 시설물(건물) 데이터의 효율적 가시화 기술이 필수적이다. 본 연구에서는 3차원 데이터 가시화 기술을 GIS 시스템에 적용하여 성능을 확인하였다. 정점(Vertex)·텍스처(Texture)버퍼(Buffer), 텍스처 LOD(Level of Detail) 설정 기술을 활용하여 시스템의 성능을 시험한 결과 가시화 속도가 약 15배 정도 향상되었다. 본 연구에서 제시한 기술은 대용량 고품질 3차원 모델링 데이터의 서비스를 위한 기반 기술로 활용할 수 있다는데 의의가 있다.
박준오(Park Joon-Oh),이준석(Lee Jun S.),최일윤(Choi Il-Yoon) 한국철도학회 2002 한국철도학회 학술발표대회논문집 Vol.- No.-
Calibration of the health monitoring system is considered in this study. For this, brief introduction on the realtime monitoring system, installed in some of the Korea Highspeed Railway bridges, is made and specifications of the calibrators are outlined. Calibration method is next explained for each sensor and detailed procedures are illustrated. Calibration results will be published elsewhere and modification of the gauge factors will also be investigated in detail.
철도교 상시계측시스템의 교정 및 교정상수 설정에 관한 연구
박준오(Joon-Oh Park),이준석(Jun S. Lee),최일윤(ll-Yoon Choi),민경주(Kyung-Ju Min) 한국철도학회 2002 철도저널 Vol.5 No.3
A health monitoring system becomes a useful tool to obtain information on long term behavior of the important railway structures such as very long span and special type bridges. The health monitoring system not only gives the direct measurement data of the railway bridges but also provides the basic data on the maintenance of the structures. Therefore, periodic calibrations of the health monitoring system will be a necessary step toward precise and accurate assessment of the railway bridges. In this study, the calibration and gauge factor readjustment process made for the health monitoring system installed in the railroad bridges is reviewed and some findings are explained in detail: specifically, the calibrators made for this purpose are illustrated and the regression processes of the calibration on long-term displacement using water level sensor, longitudinal displacement using LVDT sensor, instantaneous displacement using LVDT sensors and accelerometer are described in full length. Based on the regression results, it was found that the gauge factors need to be readjusted according to the regression equation but, since the deviation or shift is not serious so far, long-term observation on each sensor is also recommended. Future work will be concentrated on the long-term analysis of each sensor and on the database creation so that the assessment of the structures is possible
김경아,이인광,박준오,이수옥,신은영,김윤기,김경천,차은종,Kim, Kyung-Ah,Lee, In-Kwang,Park, Jun-Oh,Lee, Su-Ok,Shin, Eun-Young,Kim, Yoon-Kee,Kim, Kyung-Chun,Cha, Eun-Jong 대한의용생체공학회 2009 의공학회지 Vol.30 No.5
The present study developed a new technique with no physical object on the flow stream but enabling the air flow measurement and easily incorporated with the devices for cardiopulmonary resuscitation(CPR) procedure. A turbulence chamber was formed in the middle of the respiratory tube by locally enlarging the cross-sectional area where the flow related turbulence was generated inducing energy loss which was in turn converted into pressure difference. The turbulence chamber was simply an empty enlarged air space, thus no physical object existed on the flow stream, but still the flow rate could be evaluated. Computer simulation demonstrated stable turbulence formation big enough to measure. Experiment was followed on the proto-type transducer, the results of which were within ${\pm}5%$ error compared to the simulation data. Both inspiratory and expiratory flows were obtained with symmetric measurement characteristics. Quadratic curve fitting provided excellent calibration formula with a correlation coefficient>0.999(P<0.0001) and the mean relative error<1%. The present results can be usefully applied to accurately monitor the air flow rate during CPR.
2차 반응표면분석 모델 적합을 위한 부분합성계획에 관한 연구
박성현,서혁,박준오,Park, Sung-Hyun,Seo. Hyeok,Park, Jun-Oh 한국통계학회 1999 응용통계연구 Vol.12 No.1
2차 반응표면분석을 위한 부분합성계획은 실험 비용이 많이 들거나, 실험 자체가 어려워서 시간의 소비자 많은 경우, 실험오차의 독립추정이 가능할 때 효과적이다. 반응표면분석에서는 회전성과 기울기 회전성을 만족하는 것이 중요하다. 따라서 본 논문에서는 회전성과 기울기 회전성의 관점에서 부분합성계획을 살펴보고 또한 인자의 수와 중심점의 수가 변함에 따라서 어떤 $\alpha$(중심에서 축점까지의 거리)의 값이 최적의 실험계획이 되도록 하는지를 연구하였다.
각도 히스토그램을 이용한 빠른 최소 오차 사각형 근사화 방법
고병철 ( Byoung Chul Ko ),박준오 ( Jun Oh Park ),김덕연 ( Deok Yeon Kim ),남재열 ( Jae Yeal Nam ) 한국화상학회 2011 한국화상학회지 Vol.17 No.3
본 논문에서는 산업 현장에서 비전기술을 이용한 객체의 검사나 분류에 사용되는 빠르고 효율적인 최소 사각형 근사화 방법을 대해서 소개한다. 주어진 객체의 최소 사각형 근사를 위해서 객체의 전체 외곽선을 사용하지 않고 n 개로 샘플링된 에지 점들에 대해서만 각도 히스토그램을 생성하고 이를 이용하여 객체의 장축과 단축을 계산한다. 최종 근사 사각형을 찾기 위해 이전 단계에서 얻어진 장축과 단축을 중심으로 하는 4개의 모서리점을 갖는 사각형을 찾는다. 이후에, 잡음에 의한 오차를 줄이기 위해 첫 번째 사각형의 각도를 -1∼+1로 변형하여 추가적으로 2개의 후보 사각형을 생성한 후, 3개의 추정된 사각형과 원본 영상의 외곽선의 매칭 정도를 측정하여 오류가 최소화 되는 사각형을 최종 사각형 영역으로 선택한다. 제안된 방법을 몇 개의 실험데이터에 대해 실험한 결과 기존의 방법에 비해 빠르고 효율적인 최소 사각형 근사가 가능하였다. A fast and efficient minimum-bounding rectangle estimation of an image object is proposed for industrial applications such as object inspection and classification. To detect the minimum-bounding rectangle of an object, we estimate the directions of its major and minor axes by using the proposed angular histogram with n sampled edge points, instead of using the entire boundary. The final bounding rectangle is that which results in the minimum error when the four vertices are rotated just twice amongst three candidate bounding rectangles. Experiments are carried out to evaluate the performance of the proposed method, and show that it can detect the minimum-bounding rectangle of an object in a fast and efficient manner.