http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
朴在云 관동대학교 1980 關大論文集 Vol.8 No.1
Formulus of Simply Reinforced Rectangular Section can also be made the balanced Section theory d=C₁and A₂=C₂b. In this Case, the balanced b=C´ and A₃=C´ are made frome balanced section theory of semielastic method.
地域特化産業 分析 및 選定에 관한 硏究 : 釜山地域 製造業을 中心으로
박재운 釜山大學校 經營ㆍ經濟硏究所 1997 經營 經濟 硏究 Vol.16 No.1
그동안 부산지역의 산업구조 및 특화산업 분석에 관해 행해진 몇몇 연구들은 한두가지의 분석기법을 통하여 부산지역의 특화산업을 도출해내고 있으며, 유망산업의 선정에 있어서도 정량적 분석보다는 정성적 분석에 주로 의존하고 있다. 따라서 이들 연구는 부분적인 분석일 뿐만아니라 한두가지 특성만을 분석함으로서 각 분석기법들이 가지고 있는 한계를 극복하지 못하고 있으며, 연구자의 자의성 또한 배제돼지 않고 있다는 점이 지적될 수 있다. 본 연구는 이러한 점에 착안하여 지역특화산업을 선정하는데 있어서 적용된 각 분석기법들의 장단점을 살펴보고, 이들 연구에서 빠뜨린 분석기법을 추가하여 비교ㆍ검토함으로서 각 분석기법이 내포하고 있는 장단점을 감안한 종합적인 분석을 통하여 부산지역 특화 및 장래유망산업을 선정해보고자 하는 것이 목적이다. 분석방법으로는 立地商 분석(Location Quotient Analysis) 및 변화-할당 분석(Shift-Share Analysis), 지역성장율시차분석(Regional Growth Rate Differential Analysis), 지역간 투입-산출모형(Regional Input-Output Model) 등을 주로 이용하였다. 분석결과를 종합적으로 평가할 때, 부산광역시의 특화산업으로는 섬유제품, 조립금속제품, 기타 전기기계, 출판 및 인쇄산업 등이 나타나고 있다. 한편, 입지우위성이 높아 장래 특화유망산업이 될 수 있는 것으로는 음식료품, 목재 및 나무제품, 출판 및 인쇄, 고무 및 플라스틱, 기타 기계 및 장비, 재생재료 가공처리업 등을 선정할 수 있다. 산업경쟁력이 높은 장래 특화유망산업으로는 목재 및 나무제품, 비금속광물제품, 의료ㆍ정밀ㆍ광학기기, 자동차 및 트레일러를 들 수 있다. 소득 창출효과가 높은 고부가치산업으로서의 특화유망산업 비금속광물, 기타 전기기계, 의료ㆍ정밀ㆍ광학기기, 자동차 및 트레일러 등을 선정할 수 있다. 이상을 종합하여 부산시 장래 유망특화산업을 선정하면, 의료ㆍ정밀ㆍ광학기기, 자동차 및 트레일러, 목재 및 나무제품, 재생재료 가공처리업 등이다.
잔骨材用 海砂利用에 關한 實驗的 硏究(Ⅰ) : Sea Sand of Standard grading Curve 標準粒度曲線內海砂
朴在云 관동대학교 1984 關大論文集 Vol.12 No.2
콘크리트 構造物의 量的인 增加에 依하여 骨材의 消費度가 높아져서 콘크리트用 잔骨材인 河川砂의 求得이 점차 심각해지므로 콘크리트用 잔骨材로서 海砂의 의존도가 높아지고 있는 실정이다. 鹽海地域의 建設工事時에는 工費의 절감을 위하여 인근의 海砂를 利用함이 좋을 것이다. 잔骨材用 海砂의 問題點은 骨材에 부착되어 있는 염화물과 骨材에 섞이여 있는 조개껍질이다. 본 硏究는 海砂를 콘크리트用 잔骨材로서 사용하기 爲하여 諸般物理的 性質試驗과 鹽分含有量試驗, 壓縮强度試驗을 通하여 河川砂와 比較 檢討하므로 海砂에 섞여있는 조개껍질은 問題가 되지 않으며, 海砂의 鹽分含有量에 依한壓縮强度는 鹽分含有物의 증가에 따라 壓縮强度가 증가함을 보인다. The using of sea sand for fine aggregate is increasing as fine aggregate for concrete because of the stable supply difficulty of the river sand. It would be very convenient to use sea sand for fine aggregates of concrete sea side construction works. In this paper, it was tested and disscussed on the properties of sea sand for fine aggregates of concrete on the Eesten part in Korea. The most serious problem of the sea sand as fine aggregate of concrete is the salt sticking on the fine aggregate. Compressive strenght of morter mixed with sea sand as fine aggregate was measured by using 50.8mm cubic Mould strength of morter according to the salt sticking was discussed.
박재운,김호범 포스코경영연구소 2012 POSRI경영경제연구 Vol.12 No.3
The objective of this study is to figure out the trends and properties of input-output indicators, and the structural change index(SCI) and technical diffusion index(TDI) in the Korean Assembly and Processing sectors(APMs) by the constant-priced input-output tables. Major findings of this study are as follows; First, the values of SCI based on the total output, and export ratios to the amount of each indicators of manufacturing sector have been showing the W-type’s ups and downs for the past 15 years from 1995 to 2009. The core sector affecting the values of SCI in terms of 2 indicators above were that of Electronic & electrical equipment through the whole period. Second, in case of small-sized classifications, the SCI values of sub-sectors within Electronic & electrical equipment have been largely changed during the Asian crisis, and those of sub-sectors within General machinery & equipment and Transportation equipment have been more fluctuated during the Global financial crisis. Third, SCI values and trends of Electronic & electrical equipment and Transportation equipment within APMs have been moved into the opposite direction. This is because that there are the relative gap of high export demand in case of Electronic & electrical equipment, and of high domestic consumption demand in case of the General machinery & equipment and Transportation equipment sectors. Lastly, in case of the values of TDI based on domestic intermediate input coefficients, the trend of APMs has been similar to those of total output ratios, but those of sub-sectors within APMs, i.e, 4 medium-sized sectors have been comparatively different from that of whole APMs.
잔骨材用 海砂利用에 關한 實驗的 硏究(Ⅱ) : 標準粒度曲線外海砂 Sea Sand Without Standard Grading Curve
朴在云 관동대학교 1985 關大論文集 Vol.13 No.3
Currently according as most of the Construction works in Korea are concrete structure, the using of sea sand for fine aggregate is increasing as a fine aggregate for concrete because of the stable supply difficulty of the river sand. It was tested sea Sand without Standard Grading curve and discussed on the properties 10 Kinds of Sea Sand for fine aggregate of Concrete on the Eastern part in Korea. Compressive strength of mortar mixed Sea Sand as fine aggregate was measured by using Cubic Mould Strength of Mortar according to the salt sticking was discussed. also river sand was examined discussed.
박재운,Park, Jae Woon 대한토목학회 1992 대한토목학회논문집 Vol.12 No.4
본 연구는 편심축하중을 받는 구속 RC 장주의 거동해석에 대한 계속연구로서, 참고문헌에서 철근콘크리트기둥의 비선형성을 고려한 이론해석방법을 도출하고, 이 이론해석방법에 의한 비선형 해석프로그램을 개발하였다. 이 프로그램을 이용하여 정해에 보다 근접한 기둥의 극한강도를 해석하였으며, 만족한 결과를 이미 얻었다. 이 논문에서는 개발한 프로그램을 이용하여 구속 철근콘크리트 기둥의 극한강도와 거동에 영향을 주는 단부회전구속, 단부구속비, 단부편심거리, 단부 편심거리비, 단부횡방향구속, 콘크리트의 압축강도, 기둥의 철근비, 철근의 항복강도 등 각종 매개변수의 특성을 심도있게 연구, 분석하였다. In this study, Behavior of Eccentrically Loaded Restrained Concrete Slender Columns are investigated the continuation. The paper is : nonlinear constitutive relations of reinforced concrete columns are formulated, the multivariable nonlinear equation formulated in this study is solved by the incremental iterative method, the solution scheme is suitable for computer application, the proposed method bas been compared with the numerical examples and other research results and is shown to be in good agreement Accordingly, the objectives of this investigation are to use the method developed to conduct a parametric study of the different variable (Rotational Restraints,Ratio of End Restraints. End Eccentricity, Ratio of End Eccentricities,Lateral Restraint, Concrete Strength, Ratio of Reinforcement. Yield Point of Reinforcement) influencing the behavior and the ultimate strength for columns. Chosen values for different parameters and their variations are based on values encountered in practice and on results of other analylitical studies.
Temporal Aquaporin 11 Expression and Localization during Preimplantation Embryo Development
박재운,전용필 한국발생생물학회 2015 발생과 생식 Vol.19 No.1
Environmental conditions during early mammalian embryo development are critical and some adaptational phenomena are observed. However, the mechanisms underlying them remain largely masked. Previously, we reported that AQP5 expression is modified by the environmental condition without losing the developmental potency. In this study, AQP11 was examined instead. To compare expression pattern between in vivo and in vitro, we conducted quantitative RT-PCR and analyzed localization of the AQP11 by whole mount immunofluorescence. When the fertilized embryos were developed in the maternal tracts, the level of Aqp11 trascripts was decreased dramatically until 2-cell stage. Its level increased after 2-cell stage and peaked at 4-cell stage, but decreased again dramatically until morula stage. Its transcript level increased again at blastocyst stage. In contrast, the levels of Aqp11 transcript in embryos cultured in vitro were as follows. The patterns of expression were similar but the overall levels were low compared with those of embryos grown in the maternal tracts. AQP11 proteins were localized in submembrane cytoplasm of embryos collected from maternal reproductive tracts. The immune-reactive signals were detected in both trophectoderm and inner cell mass. However, its localization was altered in in vitro culture condition. It was localized mainly in the plasma membrane of the blastocysts contacting with external environment. The present study suggests that early stage embryo can develop successfully by themselves adapting to their environmental condition through modulation of the expression level and localization of specific genes like AQP11.