http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
ACE(Autoclaved Cement Extrusion) Panel의 특성향상
박용갑 선문대학교 ·중소기업기술지원연구소 1996 선문공대 연구/기술 논문집 Vol.1 No.1
산학협동으로 현재 건축자재로 이용되고 있는 ACE panel과 ceramic 샤시의 주원료인 cement. 규석, 석면의 양을 조절하였으며, 특히 저석면의 제품을 목표로 제품의 품질을 향상시킬 수 있는 최적 비율을 도출하여 이를 생산현장에 적용, 생산원가 절감 및 기계적 특성 등 품질향상을 이루었다. ACE panel and ceramic chassis, which are used for building materials, are developed though industry·-university joint project Amount of cement. sihca and asbestos was controlled to reduce asbestos content Optimum composition for low production cost and better quality product was found and applied for manufacturing plant
AlN-SiO2-Al2O3계로부터 AlN-Polytypes의 제조
박용갑,장병국 한국세라믹학회 1989 한국세라믹학회지 Vol.26 No.1
In order to synthesize AlN-polytypes from AlN-SiO2-Al2O3 system, composition A (AlN/SiO2/Al2O3=1/0.3/0.05, mole ratio) and composition B(AlN-SiO2-Al2O3=1/0.2/0.05, mole ratio) were used. AlN-polytypes were produced by nitriding the mixture at 175$0^{\circ}C$~190$0^{\circ}C$ under N2 atmosphere. For lower reaction temperature, 15R phase was produced and in the case of higher reaction temperature, AlN phase was only produced. As each composition was heated at 185$0^{\circ}C$ in N2 atmosphere, produced main phases were 15R phase for composition A and 21R phase for composition B respectively. The fracture surfaces of produced reactants showed porous skeleton structure.
박용갑,장병국 한국세라믹학회 1989 한국세라믹학회지 Vol.26 No.3
In order to evaluate the oxidation behavior of $\beta$-Sialon, $\beta$-Sialon ceramics was prepared from Si3N4, Al2O3, AlN and Y2O3 system. The specimens were oxidized in an oxygen atmosphere at 1, 20$0^{\circ}C$ for 9days. Oxidation behavior was evaluated by weight gain oxidation process, surface roughness. Microscopy, EDX and X-ray diffraction analysis were also used for the evaluation. The weight and surface roughness ofoxidized specimens were increased with increasing the oxidation time. Oxidized products were mullite, $\alpha$-cristobalite, yttrium aluminum oxide and yttrium silicate oxide.
The Contemporary Manner of the ‘Pity’ in the Concept of Classical Meaning
박용갑 한국콘텐츠학회 2009 International Journal of Contents Vol.5 No.4
The concept of pity has been continually debated as one of the major characteristics of tragedy, as highlighted by Aristotle. Especially, this concept might be changed according to the change of drama characters, relying on times. Aristotle says that ‘pity’ must be included in the accounts of tragedy along with fear. Historically, divergent interpretations have been understood in different meanings based on the worldview of each era. This thesis attempts to explore ‘pity’ including how it has been understood and discussed since Aristotle first mentioned it, and search for a way of having pity on a person who undergoes misery until now in the times of losing the tragedy in real meaning.
박용갑,Hyun Woo Choi,Gi Su Mun,하만영 대한기계학회 2020 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.34 No.7
This study examines the mixed convection inside a lid-driven enclosure containing an elliptical cylinder for Reynolds numbers of 100 ≤ Re ≤ 1000. A simulation conducted to study the effects of the aspect ratio, and the temperature boundary conditions (θ Cyl = θ C or θ C /2) of the elliptical cylinder. The heat transfer performances rely on the relative magnitude of the viscous force caused by the top lid movement. Another factor is the buoyancy force that occurred due to the temperature difference between the heated bottom and the cold top walls, which also strongly depends on the aspect ratio. At Re = 500, the value of <Nu B > increased by about 7.6 % at θ Cyl = 0 and AR = 4.00 compared to the results of a circular cylinder (AR = 1.00). Moreover, a correlation has been proposed to estimate the Nusselt nuber for the geiven Reynolds number, aspect ratio, and the temperature of cylinder based on the power law model with a high goodness of curve fitting.
박용갑 선문대학교 1998 공과대학논문집 Vol.1 No.1
AIN 세라믹 기판에 금속 몰리브덴(Mo)을 메탈라이징 하기 위하여 Mo -SiO_(2)- TiO_(2) 조성의 Pasteti- AIN 기판에 스크린인쇄 하였다. 메탈라이징 효과에 미치는 Paste의 볼밀링시간, TiO_(2) 함량 및 소결 온도(1200- 1400℃) 의 영향을 조사하였다. 메탈라이징된 층의 표면과 파단면은 X-ray와 SEM으로 기판과 Paste와의 반응층은 EDX 로 분석하였으며, Paste와 기판과의 접착강도도 측정하였다. Mo-Paste는 Mo : SiO_(2) : TiO_(2) = 86 : 6 : 8 의 중량 비율로 20 이상 볼밀링 하였을 때 가장 좋은 결과를 나타내었으며, 소결 온도는 l250℃(N_(2) + H_(2) 분위기) 일 때 가장 높은 0.93kg/㎟의 Peel 강도를 얻었다. Mo-SiO_(2)-TiO_(2) pastes were screened on AIN substrates in order to metallize metallic molybdenum on AIN ceramic substrates. The effects of ball- milling time, TiO_(2) content of the paste and sintering temperature on metallizing were investigated. The surfaces of metallized layers and their cross sections were analyzed by X-ray diffraction and scanning electron microscope. The reaction layers between Mo paste and AIN substrate were also analyzed by EDX and the adhesive strengths were measured. The best results were obtained when the ratio of Mo-paste (Mo : SiO_(2) : TiO_(2)) were 86% : 6% : 8%. The peel strength (0.93 Kg/㎟ ) was highest at sintering temperature at 1250℃.
박용갑 선문대학교 1994 鮮文論叢 自然科學 編 Vol.- No.4
Mekbansuk is one of the silicate minerals which mainly consists of Quartz, Albite and Microcline. In order to investigate the properties and applications, the chemical analysis for composition and x-ray diffraction for mineral phase identification had been carried out. The microstructure was observed by scanning electron microscope. Mekbansuk showed porous microstructure. The result of the PH measurement indicated a change from acid to neutral. The adsorption phenomena on the porous material were studied and Infrared emissivity was measured, Its applications are disscused in detail.