http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박연규 ( Yon Kyu Park ),강대임 ( Dae Im Kang ),양희선 ( Hee Sun Yang ) 한국감성과학회 1999 추계학술대회 Vol.1999 No.-
본 논문에서는 촉각의 효과적인 제시를 위한 하나의 보조수단으로 진동의 제시를 상정하고, 이를 위한 사전작업으로 진동에 따른 촉감의 변화를 파악하고자 하였다. 이를 위하여 진동 제시 장치를 제작하였고, 진동에 의한 촉감의 효율적인 평가를 위하여 손가락을 제외한 다른 경로로의 진동 전달 및 소음 전달을 차단하고자 하였다. 또한, 진동과 관련된 물리량으로 주파수와 진폭을 결정하였으며 이를 정량화 하였다. 본 연구의 목적이 진동에 의한 촉감의미세조정과 관련된 것임을 고려하여 주관 평가 시 진동의 제시는 각 주파수별로 진동에 의한 촉감의 변화가 발생하는 기준 진폭으로 하였다. 주관 평과 결과, 주파수가 증가할수록 더 매끄럽게 느끼며 그 감각이 분명해 짐을 확인할 수 있었다.
김양한,박연규,김영기,Kim, Yang-Hann,Park, Yon-Kyu,Kim, Young-Key 한국음향학회 1997 韓國音響學會誌 Vol.16 No.6
성덕대왕 신종에 대한 연구 초점 중의 하나로 2개의 근접한 주파수에 의해 발생되는 맥놀이 현상을 들 수 있다. 본 논문은 이러한 맥놀이 현상이 종의 어떠한 진동형태로부터 기인하는지를 실험데이터를 이용해 살펴보고 있다. 진동신호의 측정은 종 표면에 고르게 분포된 108개의 지점에서 가속도계를 이용해 측정하였다. 시간 영역과 주파수 영역엣 각각 신호를 분석하였으며, 800Hz 이내에 존재하는 12개의 측정된 모우드 형태를 그림으로 나타내었다. Beating phenomenon which is generated by two closely located natural frequencies is one of research tenet for King Song-Dok bell. In this paper, we investigate the vibration shape of these natural frequencies using very extensive experimental data. Vibration signals are sampled at 108 points around the bell using accelerometers. Measured signals are anlayzed in time and frequency domain. Twelve natural shapes under 800Hz are plotted.
신홍호,김종호,박연규,주진원,강대임,Shin, Hong-Ho,Kim, Jong-Ho,Park, Yon-Kyu,Joo, Jin-Won,Kang, Dae-Im 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.7
The column-type sensing element in building and mechanical construction parts was designed as three forces and three moments sensor by attaching strain gages approximately. Compared to conventional multi-component sensor, the designed sensor has high stiffness and low cost. The radius of the column was designed analytically and compared with finite element analysis. The interference errors between components were minimized by using addition and subtraction procedure of signals. The fabricated sensor was tested by using a deadweight force standard machine and a six-component force calibration machine. The calibration results showed that the 6-component forces and moments sensor had interference error less than 7.3 % between $F_x$ and $M_x$ components, and 5.0 % in case of other components.