http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
플랜트 유닛 수준의 대용량 3D CAD 조립체의 간략화 방안
권순조(Soonjo Kwon),김병철(Byung Chul Kim),박선아(Sunah Park),문두환(Duhwan Mun),한순흥(Soonhung Han) (사)한국CDE학회 2015 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2015 No.동계
육상 및 해양 플랜트의 설계 과정에서 서로 다른 복잡도를 가지는 장치, 유닛, 모듈 등이 사용된다. 장치의 경우 기자재 제작사가 독립적으로 설계 및 제작을 한다. 그러나 유닛 수준이상의 플랜트 컴포넌트의 경우 다수의 장치, 구조 부재, 그리고 배관으로 구성이 된다. 그리고 구성 장치들 중 일부에 대해서는 다른 기자재 제작사로부터 제공 받은 설계 데이터를 사용한다. 이 논문에서는 플랜트 유닛에 해당되는 Fresh Water Unit 을 대상으로 기 개발된 3D CAD 조립체 데이터 간략화 시스템을 적용한 결과를 설명한다. 그리고 이 과정에서 발생된 문제점들을 분석하고 그에 대한 해결방안을 제시한다.
김수상(Soosang Park),박도현(Dohyeun Park),박순조(Soonjo Park) 한국자동차공학회 2002 한국자동차공학회 Symposium Vol.2002 No.11
In this paper, a passenger air bag(PAB) folding method using finite element analysis was suggested. As PAB is<br/> more complex in shape than other airbags, generally it takes much time and efforts than others and requires highly<br/> skilled experience to get folded finite element model. Fully folded PAB finite element model was achieved by<br/> performing the continuous series of simulations. So, Anyone without skilled experience in air bag folding process<br/> can get folded PAB easily by following the process. It can save time in PAB folding process and decrease errors in<br/> PAB deployment simulation, and is expected to contribute to the development of advanced air bag which has to<br/> consider out of position (OOP) situation.
Front End Module의 5마일 범퍼 충돌해석에 관한 연구
박도현(Dohyeun Park),이영호(Youngho Lee),박순조(Soonjo Park) 한국자동차공학회 2004 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
As one of the cores of change of automobile industry, FEM(Front End Module) is rising on the standard of newly developed cars. FEM Carrier, front structure should be designed to endure impact energy of the car for the safe of the functional parts in order to meet the crash regulation and product requirements. Under low speed impact, crack frequently initiates at plastic part of Hybrid type Carrier. Tom Carrier means high repair cost in addition to the loss of assembling function of components such as Head Lamp, Radiator, condenser and so on. On this paper. deformation behavior of FEM on the crash was analyzed using commercial crash software pam-crash. The effect of design variables of Carrier on the strength has been investigated. The design changes of Stay and B/Beam were considered too. The results of simulation were verified by test. The most dominating factor of Carrier damage was the lateral displacement of B/Beam. Carrier and Stay design modification themselves found to be insufficient for the prevention of Carrier damage. Instead, the isolation of displacement between carrier and B/Beam has been found to be effective on the prevention of Carrier damage.
에어백 폴딩 재현 방법에 따른 비정상 착좌 해석에 대한 연구
박원석(Wonsuk Park),홍순구(Soongu Hong),박순조(Soonjo Park) 한국자동차공학회 2004 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
There is an increasing pressure to reduce injuries by using airbags for out-of-position impact loading conditions. At the same time, numerical simulation requires accurate models applicable to the OOP (Out Of Position) loading cases. However, modeling folded airbags from the 3D CAD geometry is a very time consuming task. This paper investigates the effects of passenger airbag inflation characteristics in terms of airbag modeling technique. The following two tests were simulated with the airbag model. 1. Static airbag deployment in pendulum test 2. OOP Position, Low Risk Deployment test. These two tests were then compared to the simulation results. For OOP simulation, the directly folded mesh and scaling mesh airbag model showed satisfactory correlation, but the projection mesh was not suited to OOP modeling.
조선해양 기자재 3D CAD 단품 데이터 간략화 시스템 개발
김병철(Byung Chul Kim),권순조(Soonjo Kwon),박선아(Sunah Park),문두환(Duhwan Mun),한순흥(Soonhung Han) (사)한국CDE학회 2013 한국CDE학회 논문집 Vol.18 No.3
It is necessary to construct equipment catalog in ship outfitting design and offshore plant design. The three-dimensional CAD data of equipment take on different level-of-detail depending on the purpose. Equipment suppliers provide CAD data with high complexity while ship designers need CAD data with low complexity. Therefore, it is necessary to simplify CAD data. However, it takes much time to simplify them manually. To resolve the issue, a system for automatically simplifying the 3D CAD data of equipment was developed. This paper presents the architecture of the system and the implementation details. In addition, experiment result using the prototype system is explained.
기자재 카탈로그 구축을 위한 높은 복잡도를 가지는 기자재 3D CAD 데이터의 간략화 절차
강연욱(Yeonuk Kang),박선아(Sunah Park),문두환(Duhwan Mun),권순조(Soonjo Kwon),리경호(Li jinggao),천상욱(Sanguk Chun),한순흥(Soonhung Han) (사)한국CDE학회 2012 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2012 No.2
선박 의장과 해양 플랜트의 설계 및 건조 후 유지보수를 위해서 기자재 카탈로그의 구축이 요구된다. 기자재 카탈로그에서는 기자재의 3D CAD 정보뿐만 아니라 포트 정보와 사양 정보가 저장된다. 조선소의 기자재 카탈로그의 구축 현황을 조사한 결과 기자재 카탈로그의 구축에 대한 다양한 요구사항이 존재하며 수작업으로 진행이 되기 때문에 카탈로그 구축에 많은 시간이 소비 되고 있다. 이 논문에서는 기자재 카탈로그의 구축 절차를 분석한 결과에 대해서 설명한다. 그리고 높은 복잡도를 갖는 기자재 업체의 3D CAD 데이터를 간략화하여 선박이나 해양플랜트의 기자재 카탈로그를 구축하는 변환 시스템의 개발 절차에 대해서 논의한다. 마지막으로 3D CAD 데이터의 간략화를 위한 핵심 기능 중 하나인 특징형상 재배열 알고리즘을 구현한 결과에 대해서 설명한다.
특징형상 기반 기자재 3D CAD 조립체 데이터 간략화 시스템 개발
김병철(Byung Chul Kim),권순조(Soonjo Kwon),박선아(Sunah Park),문두환(Duhwan Mun),한순흥(Soonhung Han) 대한기계학회 2014 大韓機械學會論文集A Vol.38 No.10
플랜트 설계를 위해서는 기자재 카탈로그를 구축해야 한다. 기자재의 3 차원 CAD 모델은 목적에 따라 서로 다른 상세도를 가진다. 기자재 제작사는 높은 상세도를 갖는 CAD 데이터를 제공하는 반면에 플랜트 엔지니어링사는 낮은 상세도를 가지는 CAD 데이터가 필요하다. 이와 같은 문제를 해결하기 위해서 기자재 3D CAD 조립체 데이터를 자동으로 간략화하는 시스템을 개발하였다. 이 논문에서는 간략화 시스템의 구조, 상세 기능과 함께 카탈로그 생성을 위한 중립 데이터 형식을 제안한다. 그리고 프로토타입 시스템을 이용한 간략화 실험 결과를 설명한다. It is necessary to construct an equipment catalog in plant design. A different level of detail may be needed for the three-dimensional (3D) computer aided design (CAD) data for equipment, depending on the purpose. Equipment suppliers provide CAD data with high complexity, whereas plant designers need CAD data with low complexity. Therefore, it is necessary to simplify the 3D CAD assembly data. To resolve this issue, a system for automatically simplifying the 3D CAD assembly data of equipment was developed. This paper presents the architecture of the system, the detailed functions of the system, and a neutral data format used for uploading simplified 3D CAD assembly data to a plant 3D CAD system. In addition, experiment results using the prototype system are explained.
고창성(Changseong Ko),박종현(Jonghyun Park),박경환(Kyunghwan Park),박순조(Soonjo Park) 한국자동차공학회 2006 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
Weight minimization is important to reduce the vehicle cost and environment problem. Shape optimization is one of methods to reduce the weight but not used widely due to the difficulty of use. In this study, shape optimization and newly shaped FE model generation with morphing technique is explored. Also merits and demerits comparison of the commercial software was performed to furnish information of morphing technique. The research results show that newly shaped FE model generation with morphing technique is successful and very efficient way to reduce the time of product development.