파리협정 제6조 국제탄소시장의 감축유형 규정에 대한 우리나라 협상 입장 수립 연구: 탄소포집·활용·저장(CCUS) 기술 기반 감축사업 측면에서

박선주(Park, Sunjoo),오채운(Oh, Chaewoon),신경남(Shin, Kyungnam) 한국기후변화학회 2020 한국기후변화학회지 Vol.11 No.5-2

Article 6 of the Paris Agreement lays the groundwork for formation of an international carbon market. Under this agreement, parties are given a flexible way to achieve their nationally determined contribution (NDC) by using internationally transferred mitigation outcomes (ITMOs) produced in voluntary cooperation between or amongst parties. For implementation of Article 6, parties have been negotiating specific rules that will guide the behaviors of participating countries in cooperative approaches and sustainable development mechanism. Of the negotiating items, rules regarding the ITMOs are quintessential because they can influence ITMO production quantity, quality, exchange equivalence, etc. in the international carbon market. This can affect party decisions to participate in cooperative approaches or sustainable development mechanism, scope and level of participation, domestic mitigation actions, etc. One negotiating item is ‘types of mitigation’ allowed to produce ITMOs. Mainly, three types of mitigation have been discussed: i) emission reduction, ii) removal, emission removal or removal by sinks, and iii) emission avoidance. In December 2019, ‘emission reduction’ and ‘removal’ were agreed to be included as mitigation types, though ‘emission avoidance’ was not. This study paid attention to which types of mitigation should be supported from the perspective of carbon capture, utilization, and storage (CCUS) technologies. The Korean government plans to achieve a significant portion of its mitigation target in NDC by utilizing CCUS technologies, which can be divided into carbon capture and storage (CCS) technologies and carbon capture and utilization (CCU) technologies. Also, Korea has pushed the development and transfer of CCUS technologies at home and abroad. Therefore, an analytical frame is formulated with four factors that define the types of mitigation: i) specific point sources, ii) strict baseline, iii) degree of temporary storage, and iv) strict methodology. With this frame, this study explains the technological characteristics of CCS and CCU technologies, attempts to define the types of mitigation activities that deploy CCS and CCU technologies, and explores Korea’s current status on development and retention of these technologies. The most appropriate negotiation position on the types of mitigation for Korea was discussed. This study concludes by summarizing analytical results and suggests Korea’s future actions.

백두대간보호지역 주민의 보호지역지지 행동의도에 영향을 미치는 인자 규명

박선주(Sunjoo Park), 김성일(Seong-il Kim) 국립공원연구원 2018 국립공원연구지 Vol.9 No.3

This paper investigates the factors that influence local residents’ behavioral intention in Baekdu Daegan Protected Area (BDPA) in order to predict behavior of local residents on designation of protected areas. A filed survey was done in Namwon which is included in BDPA to identify the factors that affect local residents’ satisfaction of protected area and behavioral intention whether they agree or disagree on designation of additional protected areas. Results of analysis show that local people’s satisfaction was affected by performance after designation of protected area and their attitude towards protected area and reference groups such as family when they are confronted with further expansion of protected areas. Providing information and encouragement of participation by local people on decision making process was also important in order to induce local residents positive support for protected area.

시각장애인을 위한 웹기반 교육

박선주 ( Sunjoo Park ),배한나 ( Hanna Bae ),이병국 ( Byunggook Lee ),이선미 ( Sunmee Lee ),주문원 ( Moonwon Choo ) 한국정보처리학회 2005 한국정보처리학회 학술대회논문집 Vol.12 No.2

시각장애인의 웹 접근성에 대한 문제점을 분석하고, 이 요인을 근거로 시각장애인을 위한 웹 서비스 환경을 실제적으로 향상시키고자 한다. 특히 시각장애인들의 웹 기반 학습환경의 핵심적 요소인 사전검색서비스를 위한 시스템모델을 제안하고 그 구현방법론을 제시하고자 한다.

중소기업 생애주기 및 영역별 규제개선 우선순위 도출 모형 설계

박선주(Park, Sunjoo),박정원(Park, Jung-Won) 한국규제학회 2022 규제연구 Vol.31 No.1

본 연구는 중소기업 규제개선 과제의 우선순위를 선정하기 위한 모형을 설계하고, 이를 시범적용하여 향후 규제개혁 실무에 함의를 도출하고자 하였다. 중소기업은 대기업에 비하여 동일한 규제에 대해서도 상대적으로 가중부담을 느끼므로 형평성 관점에서 규제차등화, 규제유연화 제도가 논의되어왔고, 우리나라에서도 규제 형성과정에서 일부 도입되어 실행되고 있다. 그러나, 중소기업에서는 여전히 불합리한 규제에 대한 불만과 그에 따른 기업활동에의 애로사항이 지속적으로 제기되고 있다. 이에 여러 규제개혁 통로를 통해 다양한 규제개선 과제가 접수되고 있으나, 피규제자나 규제개선의 결정자 등 정책의 대상자와 결정자 모두 규제개선 과제의 우선순위를 판단하기에 어려움이 있다. 이에 본 연구에서는 IPA방법론을 차용하여, 중요성과 기대효과, 문제해결 가능성과 중소기업 가중부담으로 각각 비교하여 최우선, 우선, 장기개선 과제의 범주로 구분하도록 모형을 설계하였다. 또한, 중소기업 관련 미해결 규제개선 과제 80개를 선정하여, 우선순위 도출모형을 시범적으로 적용하여 유용성을 확인하였다. 규제는 지속적인 관리를 통해 불합리성이 드러날 때마다 수시로 대응해야 하며, 특히 중소기업에 대한 규제개선은 제도적으로나 실무적으로 보다 고도화될 필요가 있겠다. 이에 본 연구에서 제시하는 우선순위 도출모형이 향후 중소기업 규제개선에 활용도가 높을 것으로 기대한다. This study aims to design a model to prioritize the regulatory improvement tasks for small-and-medium-sized enterprises (“SMEs”) and derive implications for implementing regulatory reform in the future through the pilot application of the model. Even for the same regulation, SMEs are under a relatively heavier burden than large enterprises. Thus, differentiating regulations and regulatory flexibility systems have been discussed from an equity standpoint between SMEs and large enterprises. Some of such systems have been introduced and implemented in Korea as well. However, SMEs continue to point out the complaints about unreasonable regulations and difficulties in corporate activities arising therefrom. As such, a variety of regulatory improvement tasks are being received via various regulatory reform channels, but it is difficult to determine the priorities among the regulatory improvement tasks for both the targets of the policy and decision-makers, such as the regulated and the decision-makers of regulatory improvements. Accordingly, this study employs the idea of Importance-Performance Analysis (IPA) methodology to prioritize regulatory improvement tasks. Our model is designed to classify the tasks into the top-prior, prior, and long-term improvement categories by comparing the sets of importance & expected effect and problem-solving possibility & weighted burden on SMEs, respectively. Additionally, this study selected 80 unsolved regulatory improvement tasks related to SMEs and confirmed the model’s usefulness and validity by applying the priority derivation model on a pilot basis. Frequent and immediate responses to regulatory irrationality must be implemented based on continuous management of regulations. In particular, improving regulations on SMEs should be more advanced both institutionally and practically. Thus, the priority derivation model presented in this study will be highly effective and valuable in improving regulations on SMEs in the future.

한국의 환경산업 현황 및 지역별 상대적 경쟁력 분석

박선주(Park, Sunjoo),이수기(Lee, Sugie) 대한국토·도시계획학회 2015 국토계획 Vol.50 No.2

생태계서비스를 고려한 농촌지역 주민들의 산지태양광 입지 수용에 대한 연구

박선주(Park Sunjoo) 한국환경정책학회 2021 한국환경정책학회 학술대회논문집 Vol.2021 No.10

파리협정 제6조 국제탄소시장의 감축유형 규정에 대한 우리나라 협상 입장 수립 연구: 탄소포집·활용·저장(CCUS) 기술 기반 감축사업 측면에서

박선주(Park, Sunjoo),오채운(Oh, Chaewoon),신경남(Shin, Kyungnam) 한국환경정책학회 2020 한국환경정책학회 학술대회논문집 Vol.2020 No.9

글로벌 보전 목표 성취를 위한 OECM 현황 및 특성 연구

박선주(Sunjoo Park),허학영(Hag Young Heo) 국립공원연구원 2023 국립공원연구지 Vol.14 No.1

OECM은 쿤밍-몬트리올 생물다양성프레임워크가 채택됨에 따라 보호지역 목표 달성 수단의 하나로 명시되었다. 이 연구는 현재 국제적으로 보고된 OECM의 경향과 보전수단으로써의 특성을 확인하기 위하여, 2023년 3월까지 UNEP-WCMC에 등록된 OECM 829개소를 대상으로 일반적 현황, 관리수단 및 생물다양성 보전성과를 지정유형별로 파악하였다. 현재 9개 국가에서 보고된 OECM은 육상에 비해 해양면적이 낮다. 주요 관리근거는 법, 계획, 계약 및 관습적 관리 등이며, 주요 보전성과는 KBA 등 주요 서식지 보전 및 연결성 증진, 관련 생태계서비스 유지·증진으로 나타났다. 거버넌스는 정부 주도가 대부분을 차지했으나, 보호지역에 비해 공동 거버넌스의 비중이 높은 것으로 나타났다. With the adoption of Kunming-Montreal Global Biodiversity Framework, Other Effective Conservation Measures are considered important instruments to achieve the 30 by 30 target. This study reviewed the characteristics of 829 OECMs sites through identifying the related instruments and the conservation outcomes using World Database of OECMs. OECMs, reported from 9 countries, covered approximately 1% of global terrestrial and 0.1% of marine areas. OECMs were governed and managed by law, planning, contract and the way of customary management. OECMs have contributed to biodiversity through conserving important ecological habitats and enhancing the connectivity, and promoting the related ecosystem services for local residents. In respect to governance types, proportion of shared governance was higher than that in protected areas.

제품 기능 전개 방법에 관한 연구

이언경(Eon-Kyung Lee),박선주(Sunjoo Park),강달모(Dal Mo Kang),하성도(Sungdo Ha) Korean Society for Precision Engineering 2001 한국정밀공학회지 Vol.18 No.4

This paper describes a methodology of product function deployment for understanding product functions and generating systematic functional relation charts. The product function deployment is based on the designer's understanding of product functions. The method involves following steps: 1) definition of product primary function and flows of energy, material, and information, 2) construction of a product tree using key parts, 3) definition of functions and interactions of the functional units, 4) construction of 'from-to' relation matrices, 5) grouping of the parts, and 6) construction of functional relation charts. With this approach, functional relation charts can be generated such that complex product functions are easily understood. The functional relation chart of a refrigerator is generated as an example.

CBR을 이용한 Setup Planning에서의 Similarity Index 결정에 관한 연구

한만철(Manchul Han),박선주(Sunjoo Park),하성도(Sungdo Ha) Korean Society for Precision Engineering 2006 한국정밀공학회지 Vol.23 No.9

This paper addresses the methodology development for the automated machining setup planning system using case-based reasoning(CBR). The case-based reasoning is used to develop a setup planning system, which consists of part input and representation module, case retrieval module, and case adaptation module. We present new approaches in the part input and representation module and the case retrieval module focusing on the similarity index determination. An illustrative example is included to demonstrate the proposed method.