http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
취약점 발견모형의 적합도 비교 : 모바일 운영체제를 대상으로
박상민,김태성 한국경영정보학회 2014 한국경영정보학회 학술대회논문집 Vol.2014 No.1
무선이동통신의 발달과 스마트 폰, 태블릿PC등의 모바일 디바이스 보급확대로 인해 모바일 디바이스의 업무활용도가 증가하고 있다. 이로 인해 BYOD (Bring Your Own Device) 환경에서의 보안문제가 중요한 이슈로 대두되었 다. 업무활용을 위해 사용되는 개인의 모바일 디바이스에는 개인의 커뮤니케이션정 보, 금융정보 등 개인사용자의 모바일 디바이스 이용패턴에 따른 다양한 개인정보가 저장되며, 업무에 활용될 경우, 조직의 다양한 정보가 저장된다. 이러한 환경적, 사회적인 변화로 조직에서의 모바일 디바이스의 보안수준 향상을 위한 노력이 요구된 다. 본 연구는 모바일 디바이스에 대한 조직의 보안수준향상을 위해 작성되었다. 이를 위해 모바일 디바이스에 탑재되는 모바일 운영체제의 취약점 누적개수의 현황을 파악하고, 선형 및 비선형 시계열 곡선과 취약점 발견모형 (Vulnerability Discovery Model, VDM)의 모바일 운영체제에 대한 적용가능성을 평가 및 비교한다. 본 연구의 대상은 구글의 안드로이드와 애플의 iOS이며, 적용가능성을 평가하고자 하는 모형은 선 형, 2차 및 3차방정식, S- 곡 선, 지수 및 로그곡 선, 그리고 취약점 발견모형인 AT (Anderson Thermodynamic), RE (Rescorla Exponential), RL (Rescorla Linear), LP (Logarithmic Poisson), AML (Alhazmi-Malaiya Logistic)이 다.
박상민,김희경 대한영상의학회 2021 대한영상의학회지 Vol.82 No.1
Leiomyosarcoma (LMS) is a soft tissue sarcoma that originates from smooth muscle cells. It is commonly found in the uterus but can occur throughout the body, including the retroperitoneal space, abdominal cavity, and any vascular structure. Although there are many case reports of uterine or vascular LMS metastasizing to the heart, cardiac metastasis from nonvisceral lesions has only been reported in two cases. Herein we report a rare case of a patient presenting metastatic LMS from the left flank in the right ventricle observed with echocardiography and enhanced computed tomography.
경량칸막이 벽체재료의 수열온도에 따른 전도 열전달 특성 연구
박상민,이호성,최수길,김시국 한국화재소방학회 2018 한국화재소방학회논문지 Vol.32 No.1
The paper relates to a study on the conduction heat transfer characteristics according to the heating temperature oflightweight panel wall material. Plywoods, marbles, heat resistant glasses, as well as general gypsum board and fire-proofgypsum board, which have been widely used for lightweight panel wall material, were selected as experiment samples, andheating temperatures were set as 100 ℃, 200 ℃, 300 ℃, 400 ℃, 500 ℃ and 600 ℃. Next, each of the heating temperatureswere introduced on the bottom part of the wall material for 30 minutes, and analyses were made on the heat transfercharacteristics to the backside part on the top part through conduction. As results of the experiment, the maximum backsidetemperatures were measured up to 190 ℃ for a general gypsum board, 198 ℃ for a fire-proof gypsum board, 189 ℃ fora plywood, 321 ℃ for a marble, and 418 ℃ for a heat resistant glass as heating temperatures were introduced maximum of600 ℃. In addition, the maximum change rate of conduction heat transfer were measured up to 85 W for a general gypsumboard, 95 W for a fire-proof gypsum board, 67 W for a plywood, 1686 W for a marble, and 3196 W for a heat resistantglass as the maximum heating temperatures were introduced up to 600 ℃. Also, carbonization characteristics of the wallpaperswere measured to visually check the danger of conduction heat transfer, and the results showed that smokes were firstgenerated on the attached wallpapers for the heating temperature 600 ℃, which were 1021 s for a general gypsum board, 978s for a fire-proof gypsum board, 1395 s for a plywood, 167 s for a marble, and 20 s for a heat resistant glass, and that thefirst generation of carbonization were 1115 s for a general gypsum board, 1089 s for a fire-proof gypsum board, 1489 s fora plywood, 192 s for a marble, and 36 s for a heat resistant glass. 본 논문은 경량칸막이 벽체재료의 수열온도에 따른 전도 열전달 특성에 관한 연구이다. 경량칸막이 벽체재료로 사용되고 있는 대표적인 소재인 일반석고보드, 방화석고보드를 포함하여 합판, 대리석, 내열유리를 실험시료로 선정하였고,수열온도를 100 ℃, 200 ℃, 300 ℃, 400 ℃, 500 ℃, 600 ℃로 설정하였다. 그 후 벽체재료 하단부에 각각의 수열온도를30분 동안 인가하여 상단부인 이면부로의 전도 열전달 특성을 분석하였다. 실험결과 수열온도가 최대 600 ℃로 인가됨에 따라 최대 이면온도는 일반석고보드 190 ℃, 방화석고보드 198 ℃, 합판 189 ℃, 대리석 321 ℃, 내열유리 418 ℃까지측정되었다. 또한, 수열온도가 최대 600 ℃로 인가됨에 따라 전도 열전달율의 최대 변화폭은 일반석고보드 85 W, 방화석고보드 95 W, 합판 67 W, 대리석 1686 W, 내열유리 3196 W 까지 측정되었다. 추가적으로 전도 열전달의 위험성을가시적으로 확인하기 위해 벽지의 탄화특성 측정결과 수열온도 600 ℃의 경우 부착된 벽지의 최초연기발생은 일반석고보드 1021 s, 방화석고보드 978 s, 합판 1395 s, 대리석 167 s, 내열유리 20 s에 나타났고, 최초탄화발생은 일반석고보드1115 s, 방화석고보드 1089 s, 합판 1489 s, 대리석 192 s, 내열유리 36 s에 나타났다.
박상민,남호기,이상근,강갑술,박형근 대한안전경영과학회 2010 대한안전경영과학회지 Vol.12 No.2
The Port treat 99.7% of freight for imports & exports in our country. So The Port is much accounted of the economy. Then the government and economy study about rasing port efficiency and productivity. But most of the studies are related with container terminal. Container is easy to treat. Because container is standardized. And it also is easy to implement to a system. But general terminal which treats bulk-cargo or general cargo is not. In this study, Stevedoring System applying PDA is developed by analyzing current system and business process. It is based on Web Service. So It is easy of access.