http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
냉장고 부품 설계 효율화를 위한 3D CAD 템플릿 구축
임오강,박삼규,최은호,Lim, O-Kaung,Park, Sam-Kyu,Choi, Eun-Ho 한국전산구조공학회 2009 한국전산구조공학회논문집 Vol.22 No.3
최근 기업에서는 설계 기간을 단축하기 위하여 기존의 CAD시스템들의 기능을 기업의 목적에 맞게 수정할 수 있는 커스터마이징 기술이 요구되고 있다. 이에 대부분의 상용 CAD시스템 개발회사들은 일련의 반복된 작업을 자동으로 수행할 수 있게 해주는 매크로나 외부 프로그램을 작성할 수 있도록 API를 제공하고 있다. 본 논문은 지식기반의 제품개발 체계를 구축하기 위하여 특정 부품의 정형화된 설계 규칙을 3D CAD 템플릿으로 개발하여 특정 모델링을 보다 편리하게 수행할 수 있도록 하는데 목적이 있다. 냉장고의 부품 설계에 요구되는 관련 수식, 데이터 및 설계지식을 Unigraphics의 UG/Open API를 이용하여 프로그램화하였고 그 개발사례를 제시하였다. 상용 CAD시스템에 연결하여 사용함으로써 설계 검증 및 설계 변경을 제품설계 업무에 효과적으로 적용하였다. In order to reduce the time needed for design, enterprises recently need the customizing technology that can modify the functions of existing CAD systems according to the their purposes. So most of the companies developing commercial CAD system are providing API to make possible the preparation of macro or external programs, which allow automatic performance of a series of repeated tasks. The objective of the present paper is to achieve more convenient carrying out of a particular modeling, by developing 3D CAD template of the standardized engineering rule of the particular model in order to establish a knowledge-based product development system. The formula, data and design knowledge which are required for the designing of the components of refrigerator were made into a program by means of Unigraphics' UG/Open API. And examples of such a development were presented. By using them in connection with commercial CAD system, design verification and modification were efficiently applied to the product design business.
김종우,박찬,김주환,허석,김동규,이동길,조영도,박삼규,Kim, Jong-Woo,Park, Chan,Kim, Ju-Hwan,Heo, Seok,Kim, Dong-Kyu,Lee, Dong-Kil,Jo, Young-Do,Park, Sam-Gyu 한국암반공학회 2015 터널과지하공간 Vol.25 No.3
본 연구에서는 최근 재개발되고 있는 정선지역의 철광산에서 현장 초기지압 시험과 수많은 암석 실내시험을 실시하였다. 본 광산의 측압계수는 심도가 깊어질수록 작아지는 경향을 보였으며 평균값은 1.10으로 나타났다. 본 광산에 주로 분포하는 네 가지 암종인 백운암, 규장암, 화강암, 철광석에 대한 실내시험을 통해 암석의 단위중량, 공극률, 흡수율, 탄성파속도, 일축압축강도, 영률, 포와송비, 인장강도, 쇼어경도, 내부마찰각, 점착력 등의 각종 역학적 특성을 조사하였다. 실내시험 결과의 통계분석을 통해 암종별 물성을 비교하였고 물성 상호간의 관련성을 검토하였는데, 철광석보다는 규장암이나 화강암의 강도특성이 더 컸으며 암석 물성 간의 일반적인 상관관계와는 반대되는 현상도 발견되었다. 또한 Mohr-Coulomb 파괴조건과 Hoek-Brown 파괴조건을 적용하여 네 가지 암석의 파괴조건을 해석하였다. In this study, both in-situ stress measurements and a lot of laboratory rock tests were conducted at a metal mine in Jeongseon, Korea. The stress ratio obtained from in-situ stress measurements showed a tendency to decrease according to depth below surface and its average value was 1.10. The mechanical properties such as unit weight, absorption ratio, porosity, elastic wave velocity, uniaxial compressive strength, Young's modulus, Poisson's ratio, tensile strength, shore hardness, friction angle and cohesion were investigated for the four different rocks mainly distributed at a studied mine, which were dolomite, felsite, granite and magnetite. The mechanical properties of the four different rocks were compared by means of statistical analyses, whereupon the felsite and the granite turned out to have more strength characteristics than the magnetite. The correlation of mechanical properties was also investigated, whereupon a few results against the general correlation were found out. The failure criteria of the four different rocks were finally discussed by means of both Mohr-Coulomb criterion and Hoek-Brown criterion.