
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
낙뢰로 공동주택 가구의 가전기기 보호를 위한 서지보호장치 (SPD Surge Protective Device) 설치 필요성에 대한 연구
박기철 선문대학교 일반대학원 2025 국내박사
낙뢰로 인한 공동주택(아파트) 가전기기 보호를 위한 서지보호장치(SPD : Surge Protective Device) 적용에 대한 연구 박기철 산업공학과, 재난안전전공 선문대학교 일반대학원 최근에는 기상이변에 따라 낙뢰를 동반한 집중호우의 빈도가 증가하고 있으며 이로 인한 전기・전자기기 고장 등 재산 피해 또한 지속적으로 발생하고 있다. 기상청 낙뢰 연보에 제시된 최근 10년간 낙뢰는 연평균 93,380건으로 관측되었다. 소방청 자료에 의하면 최근 10년간 낙뢰로 인해 발생된 화재 피해는 총 1,343건, 인명 피해는 6명으로 집계되었고 피해 유형으로는 전기・전자기기 고장이 50%, 화재 32%, 정전 8%, 인명 피해 2%로 나타났다. 최근의 낙뢰로 인한 주요 대형 사고로는 2015년 12월 3일의 서해대교 Cable 화재로 소방관 1명 사망, 2명 부상 및 약 20일간 교통통제가 발생하여 인명 피해는 물론 막대한 경제적 손실이 발생하였다. 이와 같은 피해는 일시적으로 과도한 전류·전압이 흐르는 서지(Surge)의 발생으로 인한 것이며, 만일 건축물 인입선로 주변에 낙뢰시에는 서지(Surge)가 옥내로 유입될 수 있으며 각 가정의 전기・전자기기에 손상을 유발할 뿐만 아니라 화재 및 폭발로 진전될 수 있으며 각 가정에서는 원인도 모르고 피해를 감당해야 할 수도 있다. 이러한 배경으로 인해 각 가정에서 가전기기를 보호할 수 있도록 하기 위한 목적으로 공동주택에서의 서지 방지에 대하여 살펴보고자 한다. 연구 방법으로는 공동주택 거주 가구의 서지(Surge)에 의한 피해를 줄일 수 있는 방법에 관하여 참고문헌을 통한 기술적인 검토 및 법적·제도적인 규제를 살펴보고, 서지부터 보호하기 위한 보호장치인 SPD(Surge Protective Device)의 필요성과 효율적이고 보호 협조된 SPD 시스템을 적용하기 위한 방법을 도출하고자 연구를 진행한다. 선행연구 및 서지 적용 실태를 살펴본 결과의 시사점으로는 서지 보호에 대한 기존의 연구는 매우 많으나, 대부분 기술적인 연구 및 대형 건물이나 소방설비 등을 중심으로 한 서지보호장치의 사례라는 점이고 우리 생활에 밀접한 영향을 미치는 가정의 전자기기를 보호하기 위한 방법의 연구는 아직 부족하였다는 점이다. 연구 결과 입주자가 사용하고 있는 주요 가전제품과 가구별 제어용 터치패드, 승강기 호출, 현관문 개폐, 외부 통화용 인터폰 등의 전기·전자 제품은 낙뢰 피해에 고스란히 노출되어 있었다. 제도적으로도 공통접지와 통합접지를 채택하는 건축물에는 SPD의 설치가 의무화되고 있는 반면 각 가정에서 사용 중인 전자제품은 품질 고급화에 따라 가격이 점점 높아지고 있음에도 불구하고 각 가정의 전기설비까지는 아직 서지보호장치(SPD)의 설치가 의무화되지 않고 있었다. 금회 연구로 전자제품을 사용하는 각 가정에서의 서지 보호의 중요성과 대책에 대한 효과의 확실성에 대한 인식향상 과 서지보호장치(SPD)의 적용을 통해 가정의 인명과 재산적인 손실 예방에 기여하고자 기대한다. 주제어 : 서지, 서지보호장치, SPD, 낙뢰, 접지시스템
고속 멀티미디어 응용을 위한 7bit 80MS/s Pipeline ADC
Analog signals and digital systems connect to the development of ADC Interface rule today. As well as in voice signals; in order to provide a wide variety of information available to video services and high-performance multimedia services, development of technology has been taken. Moreover, high-performance multimedia and application of small size and low power, ADC Technology requires low power in the future development of multimedia has increased the importance of more. In this paper, to measure this trends; low power, low voltage and low input voltage especially on a high confirmation, the benefits and wide frequency bandwidth of Op-amp design pipeline unit of the increased power consumption is increasing and more effectively by using the capacitor scaling method. In this paper 7bit 80MS / s Pipeline ADC in 0.18um 1P6M CMOS process of design and verification by using the SPECTRE tools. 1.8㎟ chip size and power consumption is 20.5mV.
박기철 延世大學校 法務大學院 2009 국내석사
The spirit and purpose of the criminal procedure is to bring a real truth to light, make justice come true and, by securing the actual ground for a sentence, support an adequate power of punishment. To stick to these two elements, therefore, it is greatly important to ensure a correct fact-finding procedure. Especially in case a criminal dependent tries to turn his/her statement over in the court, then the statements of the police officials who either have been in charge of the investigation or at least have took part in any stage of it can be regarded as a material of great value to validate the found facts.The clause 1 of the article 306 of the present criminal procedure provisions the statutory testimony of investigators, in contrast with the previous debate on the legitimacy of the investigators or the participants involved in the very case being granted as a testifier under the previous criminal law, along with the another debate on the legitimacy of the court testimonies by the involved judicial officers being accepted as proofs, provided a legal breakthrough to the issue when this new amendment was introduced April 30th, 2007.This renewed criminal procedure could be considered the request by the present time, which requires more transparency and legitimacy of the investigation processes and stronger protection of the defendant’s human rights at the same time. However there are still various arguments on the interpretation of the article 306, which are about whether the testimony by the investigator related should be allowed only for the purpose of supporting the validity of the written statement by the defendant or relevant witnesses or accepted as an independent proof of the criminal charge of the defendant.There is a view that the testimony by the investigator should be reviewed in the limited purpose. However, it would be more correct to consider this statement as an independent proof that can support the criminal charge of the defendant in that first, the renewed criminal law puts the testimony by the relevant official in the statutory form and second, this current law also allows the separation of statements and testimonies and third, every defendant can request a cross-examination to protect his/her right against the investigator who may risk the charge of false testimony, and finally it can make the article 306 itself so useless if this provision is allowed only within a very limited context because it can be so easy to nullify the testimony of the relevant officials by simply denying it.And it is also required to come up with legal measures that can make this provision more prevalent in real activities, such as regular training sessions to provide more know-how about testimonies and behaviors in the court, incentives to the police officials who testified in the court, and memo theory. This will greatly contribute to the faster proliferation of the jury system and the legal procedure centered in the public trial. 형사소송법의 정신과 목적은 실체적 진실을 밝힘으로서, 정의를 실현하고 판결의 실질적 정당성을 확보하여 적정한 형벌권을 실현하는데 있다. 이러한 목적과 정신에 부합하기 위해서는 사실확인과정이 무엇보다도 중요하다. 특히 수사단계에서 피의자였던 피고인이 진술한 내용을 공판정에서 번복할 경우 그 허위여부를 명백히 하기 위해서 그 수사를 담당하였거나 참여하였던 경찰관의 진술이 사실인정의 자료로서 그 가치가 높다고 할 것이다.이에 형사소송법 제316조 제1항에서는 조사자의 법정증언제도를 규정하고 있는 바, 개정전 형사소송법 하에서는 ‘피고인이 아닌 자’에 대하여 공소제기 전에 피고인을 피의자로 조사하였거나 그 조사에 참여하였던 자가 포함되는지 여부와 함께 그 사법경찰관의 법정증언에 대한 증거능력인정여부에 대하여 판례이론을 중심으로 견해가 첨예하게 대립하였으나 이러한 견해의 대립은 2007년 4월 30일 개정된 형사소송법에 의하여 입법적으로 해결되었고 그 간의 논란은 종식되었다.이러한 형사소송법의 개정은 수사절차의 적법절차성과 투명성 보장을 도모하는 동시에 피고인의 인권보호를 위한 시대적 요청이라 할 것이다. 그러나 개정된 형사소송법 제316조의 해석과 관련하여 조사자의 증언이 피의자의 신문조서나 참고인조서의 진정성립을 증명하기 위한 수단으로서만 허용된다 할 것인지 아니면, 피고인의 범죄사실을 인정할 수 있는 독립된 증거라 할 것인지에 대하여 또 다시 견해가 대립하고 있다.이에 조사자의 법정증언을 제한된 목적에 의거하여 한정적으로 해석해야 한다는 견해도 있으나 개정법이 명문으로 통상의 전문증언의 형태로서 조사자 증언을 규정하고 있다는 점과 법이 종례의 판례와는 달리 조서와 진술의 분리를 인정하고 있다는 점, 피고인에게 위증죄의 부담을 지고 있는 조사자에 대하여 반대신문의 기회가 주어지기 때문에 방어권을 보장할 수 있고 또 법원에 대하여 생생한 인상을 줄 수 있다는 점, 진정성립을 인정하기 위한 수단으로서만 이 제도를 인정하게 되면 사법경찰관작성 피의자신문조서는 내용부인하면 증거능력이 인정되지 않으므로 조사자 법정증언제도가 무의미해진다는 논거에 비추어 볼 때 조사자 증언은 피고인의 범죄사실을 인정할 수 있는 독립된 증거로 보는 것이 타당하다 할 것이다.또한 이러한 조사자 법정증언제도의 활성화를 위해서는 그 증언의 신빙성을 높이기 위한 법정증언 기술 및 태도 등에 대한 교육의 정례화와 법정에서 증언한 사법경찰관에 대한 인센티브 제도, 메모이론, 영상녹화물 등과 같은 법적 · 제도적 연구와 그 개선이 필요할 것이며 이는 국민참여재판제도와 공판중심주의적 법정심리절차가 우리 사회에 빠르게 정착되고 활성화됨에 있어서 크게 기여할 것이라 사고된다.
DCATV 방송프로그램을 위한 인증서기반 유통모델에 관한 연구
박기철 배재대학교 일반대학원 2009 국내석사
최근 디지털 방송을 위한 방법으로 IP(Internet Protocol)기반의 IPTV(Internet Protocol Television)와 동축케이블 기반의 DCATV(Digital Cable Television)의 경쟁이 심화되고 있다. 하지만 이런 전송방법의 차이점과 상관없이 방송된 방송프로그램 콘텐츠의 불법복제와 인터넷을 통한 무단 배포는 콘텐츠 제작업체에게 치명적인 피해를 끼치게 된다. 이러한 문제는 단순히 불법복제 콘텐츠 하나의 수익 피해로 끝나는 것이 아니라 제작업체의 수익성을 악화시켜 콘텐츠 제작업체의 연쇄적인 부도, 콘텐츠 시장의 침체 및 소멸을 야기시킬 수 있다. 더욱이 DCATV의 경우 방송프로그램 콘텐츠의 품질이 뛰어나고 디지털 매체의 특성상 복사로 인한 콘텐츠의 손실이 없기 때문에 문제는 더욱 크다 하겠다. 불법복제 방지 및 배포되는 콘텐츠의 보호를 위해 콘텐츠의 내용을 고정된 단일키로 암호화하는 방법이 많이 사용되는데 이는 방송 시청권을 가진 시청자가 방송되는 방송프로그램을 녹화하여 보관 또는 저장 하였다가 재이용을 하기 위해서는 복호화를 위한 키를 기억하고 있거나 콘텐츠를 복호화하기 위한 시스템이 구성되어져야 하는데, 위와 같은 재이용 콘텐츠는 복호화 키의 유출 위험 및 녹화 시스템으로부터 자유롭지 못한 문제점이 있으며 불법적인 유통에 취약한 문제점이 있다. 또한 시청자 본인이 아닌 제3자의 이용 또는 공정한 목적의 이용이 필요한 경우 이용권한을 제약 받는 문제점을 가지고 있다. 이에 본 논문에서는 녹화된 DCATV 방송프로그램을 보호하기 위한 유통 모델을 연구하고 시청자의 재이용 권한을 보장하고 공정한 목적의 이용권한을 허용하는 공개키 기반의 유통 모델을 제안하였다. As the current method for the digital broadcasting, the competition which is between IPTV based on IP and coaxial cable based on digital CATV is getting serious. But, not such as the difference of those method mentioned above, the piracy of the broadcasting programs and the unauthorized distribution through the internet will bring the vital damage toward to the producers of the contents finally. These problems, not only as the illegal copy of the contents damaging on the total earnings, is also becoming worse on the earnings of all producers, therefore, it is bringing the stagnation of markets and finally leading to the final as well. In addition, the problems on DCATV may be even worse in terms of DCATV has the high quality contents and is not really causing a loss on the contents copied illegally as its specific attribution of digital media. In order to prevent from illegal copy and contents distributed widely, the method encrypted as the fixed symmetric-key for the contents is in use generally. This means that the televiewers who have the broadcasting rights can copy and save the programs. Those reusable contents generally have the risk of outflowing the decrypted key and problems that is not free from recording devices as well as the vulnerable risk on illegal distribution. Plus, the only right televiewer may have the right of use, not permitted to the third-party or whoever wants to use for the impartial purposes. This paper researches the distributional model which prevents for the recorded broadcasting programs and also suggests the distributional model based on PKI accepting the proper right with an impartial purpose and guarantee for the reusable right of the televiewer.
TPM 활동요인이 설비종합효율에 미치는 영향에 관한 연구
박기철 전주대학교 일반대학원 2022 국내박사
Based on the spread of smart factories in the manufacturing industry, automation of production systems, large-scale and precision of facilities have complicated the manufacturing process, and facility management technology due to advanced facility operation is required to a higher level. Therefore, as the automation and advancement of such facilities, rational operation and efficient management may emerge as characteristics of modern corporate management and become an increasingly important issue. In addition to the establishment of a smart factory for strengthening manufacturing competitiveness, many companies are striving to improve facility efficiency by improving practical and effective production and quality, such as improving production efficiency and innovating manufacturing processes. In this fundamental management innovation method, the most representative Total Productive Maintenance (TPM) activities were progressive and effective improvement activities centered on facilities, playing a pivotal role in advancing companies and strengthening competitiveness. This study aims to assess the TPM activity factors affecting the overall facility efficiency based on the best practices of companies awarded in the National Quality Assignment Competition Facility (TPM) Division. The results of the study reveal excellent differentiation from previous studies, and the contents are as follows. First, the objectivity of the results was strengthened through the use of research data obtained from excellent companies awarded at the National Quality Assignment Contest, and not the research data by survey. Second, the reliability of the results is very high and clear by using the data selected after the first (regional preliminary announcement) and second (field review and national announcement) screening of the competition as research data. Third, even within the scope of the research target company group, datas from mid-sized and large companies were used for the analysis, and not from existing SMEs or single companies. Therefore, it is a representative study that can intuitively analyze and generalize the overall status of Korean industrial groups. In this study, the method of collecting and analyzing research data was conducted in the following way. For the collection of research data, a total of 87 excellent companies that won "gold, silver, and bronze" in the "National Quality Assignment Competition Facility (TPM) Division" over the past eight years (2014-2021) were used. Based on the collected data, double parallel parameters and facility overall efficiency of TPM activity factors (activity period, average number of years of service, individual improvements, average training time), Mean Time Between Failure (MTBF), and Mean Time To Repair (MTTR) were derived. As an analysis method, the basic characteristics of this study were first identified through the implementation of descriptive statistics. Next, the significant relationship and influence between TPM activity factors and facility comprehensive efficiency were analyzed by using the multiple regression analysis method of SPSS 26. In addition, the influence of the mediating effect between the TPM activity factor and the facility comprehensive efficiency was analyzed by adding double parallel parameters (MTBF, MTTR). Finally, the double parallel parameters were analyzed by the method of PROCESS macro model 4, and measures to enhance the overall facility efficiency were explored based on these results. This study derived the following results. First, through a significant causal analysis between the TPM activity factor and the facility overall efficiency, it was confirmed that the activity period and the number of individual improvements among the TPM activity factors had a positive (+) effect on the facility overall efficiency. Second, the results of using the double parallel parameters of MTBF and MTTR are as follows. Among the TPM activity factors, positive (+) mediating effect (was observed on the overall facility efficiency through MTBF and it was confirmed in the activity period and the number of individual improvements. In addition, the mediating effect of the TPM activity factor, the average number of years of service, and the number of individual improvements, all had a negative (-) effect on the overall facility efficiency through MTTR. Eventually, a plan was derived to strengthen the overall facility efficiency by using the double parallel parameters of MTBF and MTTR as the TPM activity factor. This study has the following implications. First, as an academic implication, it is a study that strengthens the reliability and differentiation of research results through the use of objective research data compared to existing studies. Second, as a practical implication, it presented a perspective that can be used practically according to the results of the relational influence analysis between efficient TPM activity factors and facility comprehensive efficiency. Third, in terms of the perspective of the times, alternatives were proposed to solve government policies and field mismatch and transitional problems through the combination of smart factory and TPM activities. In addition, based on strong TPM activities, it has set the stage for re-emergence as a manufacturing powerhouse as a leading force leading to changes in the manufacturing paradigm. 세계적인 제조업의 스마트 팩토리 확산추세를 바탕으로 생산시스템의 자동화, 설비의 대형화 및 정밀화는 제조공정을 더욱 복잡하게 하였고, 고도화된 설비 운용에 따른 설비관리 기술도 더욱더 높은 레벨로 요구되고 있다. 따라서 이러한 설비의 자동화 및 고도화가 진행됨에 따라, 설비의 합리적인 운영과 효율적인 관리는 현대 기업경영의 특징으로 대두되며, 더욱더 중요한 이슈화가 되어가는 실정이다. 제조 경쟁력 강화를 위한 스마트 팩토리 구축과 병행하여 제조 현장에서는 생산 효율성을 향상시킬 수 있는 기본 작업의 메뉴얼 개선과 제조공정 프로세스 혁신 등의 실질적이고 실효적인 생산 및 품질 향상, 공정효율 개선 및 원가절감 등의 안정성을 추구하며 설비 효율화 향상에 힘을 쏟고 있다. 이러한 본원적인 경영혁신 방법에서 가장 대표적으로 인식되고 있는 TPM(Total Productive Maintenance) 활동은, 설비를 중심으로 진행되는 진취적이고, 효과적인 개선 활동으로 기업의 선진화 및 경쟁력 강화에 중추적인 역할을 하고 있다. 본 연구에서는 「전국 품질분임조 경진대회 설비(TPM)부문」에서 수상한 기업들의 우수사례를 바탕으로, 설비종합효율에 영향을 미치는 TPM 활동요인에 대한 연구를 실시하고자 한다. 이로써 본 연구에서는 기존 연구들과 다른 뛰어난 차별성을 가지고 있으며, 그 내용은 다음과 같다. 첫째, 설문조사에 의한 연구자료가 아닌 「전국 품질분임조 경진대회」에서 수상한 우수기업 사례를 연구자료의 활용을 통하여 본 연구결과의 객관성은 강화 되었다고 할 수 있다. 둘째, 경진대회의 1차(지역 예선 발표)와 2차(현장심사 및 전국 발표) 심사를 거쳐 선발된 데이터를 연구 자료로 활용함으로써, 본 연구결과의 신뢰성은 매우 높고, 뚜렷하다고 할 수 있다. 셋째, 연구대상 기업군의 범위에서도 기존 중소기업 혹은 단일 기업이 아닌, 중견기업 및 대기업을 포함하였다. 따라서 우리나라 산업군의 전반적 현황을 직관적으로 분석 및 일반화할 수 있는 대표성을 갖는 연구이다. 본 연구에서는 다음과 같은 방법으로 연구자료 수집 및 분석방법을 진행하였다. 연구자료 수집에는 최근 8개년(2014년∼2021년)간 「전국 품질분임조 경진대회 설비(TPM)부문」에서 ‘금상·은상·동상’을 수상한 총 87개의 우수기업 사례를 활용하였다. 수집된 자료를 바탕으로, TPM 활동요인(활동기간, 평균 근속년수, 개별개선건수, 평균 교육시간)과 MTBF(Mean Time Between Failure) 및 MTTR(Mean Time To Repair)의 이중 병렬매개변수 및 설비종합효율을 도출하였다. 분석방법으로는 가장 먼저 기술통계 실시를 통한 본 연구자료의 기본적인 특성을 파악하였다. 다음으로 SPSS 26의 다중회귀분석방법(Multiple Regression Analysis)을 활용하여 TPM 활동요인과 설비종합효율 간의 유의적 관계성 및 영향력을 분석하였다. 또한, 이중 병렬매개변수(MTBF, MTTR)를 추가하여 TPM 활동요인과 설비종합효율 간의 매개효과 영향력을 분석하였다. 이를 위하여 PROCESS macro model 4의 방법으로 이중 병렬매개변수를 분석하였으며 이러한 결과를 활용하여 설비종합효율 강화방안을 탐구하였다. 본 연구는 다음과 같은 결과를 도출하였다. 첫째, TPM 활동요인과 설비종합효율 간의 유의적인 인과관계 분석을 통하여 TPM 활동요인 중 활동기간, 개별개선건수가 설비종합효율에 정(+)적인 영향을 미치는 것을 확인하였다. 둘째, MTBF 및 MTTR의 이중 병렬매개변수를 활용한 결과는 다음과 같다. TPM 활동요인 중 활동기간과 개별개선건수에서 MTBF를 통한 설비종합효율에 정(+)적인 영향을 미치는 매개효과를 확인하였다. 또한, TPM 활동요인의 활동기간, 평균근속년수, 개별개선건수 모두가 MTTR을 통한 설비종합효율에 부(-)적인의 영향을 미치는 매개효과를 검정하였다. 결국 TPM 활동요인이 MTBF 및 MTTR의 이중 병렬매개변수를 활용하여, 설비종합효율을 강화할 수 있는 방안을 도출하였다. 본 연구는 다음과 같은 시사점을 가지고 있다. 첫째, 학문점 시사점으로는 기존 연구들 대비 객관적인 연구자료 활용을 통하여 연구결과의 신뢰성 및 차별성이 강화된 연구이다. 둘째, 실무적 시사점으로는 특정 기업이 TPM 활동 접근 시 기업 규모와 경영환경에 따라 무분별한 자원 낭비를 없애고 효율적인 TPM 활동요인과 설비종합효율 간의 관계적 영향력 분석결과에 맞추어 실무적으로 활용할 수 있는 관점을 제시하였다. 셋째, 시대적 관점 측면으로는 스마트 팩토리와 TPM 활동의 접목을 통한 정부정책과 현장의 미스매치(Mismatch) 및 과도기적 문제를 해결하기 위한 대안을 제시하였다. 또한, 강력한 TPM 활동을 바탕으로 제조업 패러다임 변화를 이끄는 첨병 역할로써, 제조 강국으로 재도약하기 위한 발판을 마련하였다.
그래픽프로그램을 활용한 캐릭터제작에 관한 연구 : 2D그래픽 툴을 중심으로
박기철 동아대학교 교육대학원 2007 국내석사
본 연구의 목적은 컴퓨터 그래픽의 표현에 의해 나타나는 대표적인 제작방식인 2D프로그램을 활용한 캐릭터제작기법과 이를 이용해 상품화방법까지 알아봄으로써 컴퓨터그래픽과 캐릭터제작에 대한 이해를 돕고 그에 딸린 부수적인 분야의 발전 방향을 모색하는데 있다. 오늘날 대중들은 읽고 쓰는 것보다는 보고 느끼는 것에 더욱 익숙해져 있다. 이러한 과정에서 일반대중을 상대로 효과적인 커뮤니케이션을 하기란 쉬운 일이 아니다. 그래서 그들에게 친근하게 접근할 수 있고 주목성과 인지도를 높일 수 있는 방안이 필요하게 되었다. 사람들의 그런 필요에 의해서 나온 캐릭터는 그 자체가 어떤 대상을 특징화 하는 강력한 힘을 가지고 있기 때문에 대중에게 전하고자 하는 의사전달의 목적을 훌륭히 수행할 수 있다. 최근에 와서 이러한 캐릭터의 사용 범위가 점차 더 넓어지고 있으며 그것에 대한 인식도 많이 바뀌어 가고 있다. 주로 청소년층을 겨냥했던 팬시용품에 사용되었던 캐릭터가 올림픽과 월드컵 그리고 박람회와 같은 대규모의 행사나, 다중 영상매체에 의해 파급효과가 훨씬 크게 작용하는 영화, 드라마, 코메디 쇼 프로그램뿐만 아니라 일반적으로는 기업이나 공공단체의 마스코트로서 제품의 홍보와 판촉을 위해서도 적극 활용되고 있다. 이와 같은 고부가가치가 있는 캐릭터의 강력한 시각전달을 위해서는 참신한 아이디어 못지않게 필수적으로 컴퓨터그래픽의 작업이 선행되어야 한다. 과거에는 종이와 로트링(제도펜)을 사용하여 모든 분야의 디자인을 했던 사람들이 언제부터인가 종이와 펜 대신에 컴퓨터와 마우스 또는 타블렛을 사용하여 디자인하는 모습이 이제는 전혀 낯선 광경이 아닌 것이 되었다. 예전에는 펜을 잘 사용하여야만 자신이 표현하고 싶은 그림을 내 마음대로 잘 그릴 수 있었는데, 이제는 컴퓨터에서 그림을 그릴 수 있게 해주는 프로그램(소프트웨어)을 잘 사용하여야만 자신이 원하는 스타일의 이미지를 효과적으로 나타낼 수 있기 때문이다. 그러기 위해서 캐릭터에 필요한 주목성과 명시도를 높이고 시공간적 제약의 이점과 수정 및 보완작업이 용이하고 정확한 계산에서 나오는 형과 색의 시각화작업을 하기 위한 도구로서 컴퓨터그래픽의 사용은 캐릭터의 이미지를 몇 단계나 업그레이드 시킬 수 있는 강력한 수단이 된다. 본 논문에서는 본인이 그 동안 영화나 T.V예능프로그램을 위해 작업했었던 스타캐릭터디자인을 통해 파일포맷 형식이 비트맵과 벡터방식의 대표적인 2D그래픽프로그램의 특징인 포토샵과 일러스트레이션을 활용해서 캐릭터의 이미지가 어떻게 효과적으로 만들어지는지에 관해 자세히 알아보고 시각적인 효과를 극대화하기 위한 출발점으로 캐릭터제작에 관한 일반인들의 교육적인 측면에서도 보다 알기 쉽게 관심과 이해를 높이고자 한다. 또, 다양하고 개성이 넘치는 캐릭터를 각 이미지에 맞춘 머천다이징 등 실생활에서 다양하게 쓰일 수 있는 응용 가능한 상품화연구등의 경험도 충실히 제공하고자 한다.
1994년 이후 사천공항 안개의 특성변화와 예측에 관한 연구
박기철 부경대학교 환경대기과학과 2009 국내석사
서부 경남의 남해안에 위치한 사천공항에서의 비강수일의 안개와 박무의 발생과 관련된 기상관측자료의 분석을 통하여 안개 및 박무의 특성과 진사산업단지 착공 이전과 이후의 특성변화 및 통계자료를 통한 예측가능성을 검토하였다. 사천공항에서의 안개는 내륙지역에 비해 다소 낮은 발생을 보이고 해풍과 복사냉각이 동반되는 가을철 중 10월에 가장 많이 발생했다. 박무의 발생은 기온이 높아져 해풍에 의한 수증기 유입이 많은 여름철에 집중되고 그 중 6월에 가장 많은 발생이 나타났다. 사천공항의 안개 및 박무의 발생유형을 발생 전일 최대풍시 풍향과 자정시 풍향에 따라 4가지의 유형(남풍 지속형, 북풍 전환형, 남풍 전환형, 북풍 지속형)으로 분류하였고 NT(북풍 전환형)와 NC(북풍 지속형)일 때 안개 및 박무의 발생이 가장 많았다. 또한, 안개는 박무에 비해 늦게 발생하고 늦게 소산되는 경향을 나타냈고, 지속시간은 안개와 박무 모두 2∼3시간 지속되는 빈도가 가장 많았다. 진사산업단지 착공 이전과 이후의 사천공항에서의 안개 및 박무 특성변화를 분석한 결과 안개의 발생일수는 감소하였고, 박무의 발생일수는 증가하였다. 연 평균된 발생유형별 발생일수의 분석에서 남풍이 자정 이후에도 지속되는 SC에 의한 안개발생은 증가하였고 NT와 NC는 감소하였다. 박무 발생시는 전체발생일수의 증가와 함께 SC, NT, NC에서 발생일수가 증가하였다. 기상요소의 특성변화 분석에서 진사산업단지의 착공 이후 건설된 도로 및 건축물에 의한 토양으로부터의 증발량의 감소와 야간 복사냉각의 감소로 상대습도와 일교차는 감소하였고 Tmin-Td의 값은 증가하였다. 이러한 특성변화를 고려하여 진사산업단지 착공 이후의 우리나라 주변의 기압장과 국지 기압장을 분석해 보았고 안개 및 박무 발생과 관련된 기상요소 중에서 복사냉각을 확인하기 위해서 Tmin-Td를 이용하였으며 대기의 안정도를 조사하기 위해 안개 및 박무 발생 전 주변 바람장, 사천공항의 풍향 및 풍속 자료와 광주공항의 고층기상 관측자료(풍속)를 사용하였다. 또한 수증기의 공급과 기온의 하강의 측면에서는 상대습도를 활용하여 예측가능성을 진단하였다. 추가적으로 NT형과 NC형에 의한 사천공항 시정장애현상의 발생 중 다수가 북동쪽의 저지대에서 이류 되어 오는 것을 감안하여 남강의 수온자료와 사천의 기온, 노점온도 자료를 분석하였다. 그 결과 사천공항의 안개 및 박무는 (1) 발생 전일 최고기온 발생시 노점온도와 다음날 예상최저기온의 차이(Tmin-Td)가 ≤3인 경우라면 다음날 4.8km미만의 시정장애현상의 발생을 예상할 수 있고, Tmin-Td>3인 경우라 할지라도 최고기온발생시 해풍이 불고 있는 경우에는 다음날 시정장애현상의 발생의 가능성을 고려해야 할 것이다. 또한, (2) 2200LST~0400LST의 풍향이 북동, 남동, 북서이고 풍속이 2m/s 미만이면 안개 및 박무의 발생 가능성이 높고 남서일 경우 풍속이 2m/s이상이라도 발생 가능성을 고려해 보아야 할 것이다. 사천공항의 바람 관측 자료와 함께 광주공항 2100LST 고층기상 관측 자료에서 925hpa과 850hpa에서의 풍속이 월평균 풍속보다 1m/s이상 작은 값인지를 확인해보는 것도 참고할 만한 자료가 될 것이라 사료된다. (3) 발생 전 2400LST의 상대습도가 85%이상이면 박무 미만의 시정장애현상이 발생할 가능성을 생각해 볼 수 있고, 0200LST의 상대습도가 90%이상이면 안개의 발생을 예측할 수 있겠다. (4) 0200LST의 남강의 수온과 사천공항의 기온, 노점온도의 차이와 Table 7의 전체 월 평균값과의 차이를 비교해 보는 것도 시정을 예측하기에 앞서 검토해 볼 만한 자료가 될 것으로 생각된다. 남강의 수온 자료는 수질자동측정망이 설치된 이후의 3년간의 통계자료만이 사용되어 현재로서는 예측을 위한 요소로 사용되어지기에는 다소 무리가 있으나 향후 관측 자료의 축적이 이루어진다면 안개 연구를 위한 좋은 예측인자가 될 것으로 기대된다. Through characteristics analysis on the fog and mist occurrence at Sacheon airport, higher frequency of the fog and mist occurrence was shown on October and on June, respectively. Occurrence pattern has been categorized into 4 patterns by the direction of wind both when maximum wind speed occurred the day before, and that of midnight. Also, it is found that the reduction of fog and increase of mist occurs due to reduction of relative humidity, daily temperature deviations and increase of the difference between lowest temperature predicted on the day of occurrence (Tmin) and dew-point temperature under the condition of highest temperature on the day before the occurrence (Td) as a result of urbanization after the construction of Jinsa industrial Site. In order to analyze the predictability of Sacheon airport's fog and mist, this study investigates information of Sacheon airport's temperature, dew-point temperature, relative humidity as well as Gwangju airport's wind speeds of 925hpa and 850hpa and Namgang's water temperature data. The result of analyzation is as follows; mist can be expected when Tmin-Td is expected to be ≤3 and when the wind speed on 925hpa and 850hpa of 2100LST at Gwangju airport is smaller(≥1m/s) than the monthly average and the wind speed after 2200LST at Sacheon airport is smaller than 2m/s. Mist can be expected when relative humidity of 2400LST is ≥85%, and fog can be expected when the relative humidity of 0200LST is ≥90%. Additionally the difference between Namgang's water temperature and Sacheon's air temperature at 0200LST, is smaller than the monthly average, fog can occur including mist.
고등학교 성교육 지도를 위한 STS 교수-학습 프로그램 개발 연구 : 10학년 과학교과 중 ‘생식’단원을 중심으로
박기철 경희대학교 교육대학원 2009 국내석사
개방된 성문화로 인한 청소년 성문제의 증가 속에서 STS 교수-학습 프로그램을 이용한 성교육이 학생들의 학업성취도와 학습태도의 향상에 효과적이라는 연구들이 발표되고 있다. 특히, 과학교과 중 생물교과와 관련시킨 연구의 중요성이 대두되고 있으며, 더 많은 연구의 필요성이 제기되고 있다. 따라서 본 연구는 성교육을 담당하고 있는 교과 중 하나인 고등학교 10학년 과학교과 생물영역에서의 성교육 실시 중요성을 강조하였다. 과학교과서의 성교육 관련 내용 분석결과와, 서울시 소재 고등학교 2학년 학생들이 생물수업에서 배우고 싶어 하는 성교육 영역 학습순위 요구도 및 학습자료 요구도 설문자료 분석 결과를 반영하여 STS 교수-학습법을 적용한 성교육 학습 프로그램을 개발하였다. 이를 통해 학교 성교육의 실질적인 활성화에 도움을 주는데 연구의 목적이 있다. 본 연구의 분석 결과를 요약하면 다음과 같다. 첫째, 본 연구에서 설정한 생물교육과정의 성교육 영역에 의거, 고등학교 과학교과서 생식단원의 성교육 내용의 영역별 수록 정도는 ‘생식기관의 구조 및 기능’ 영역이 80%로 가장 많은 내용을 포함하고 있었다. 다음으로는 ‘임신과 출산’ 영역 70%, ‘성건강’ 영역 40%를 포함하고 있었다. 그러나 고등학생들이 생물교과에서 배우고 싶어하는 성교육 영역에 대한 요구 정도는 ‘성건강’, ‘임신과 출산’, ‘생식기관의 구조 및 기능’ 영역 순으로 나타났다. 둘째, 현재 대부분의 학교에서 성교육이 실시되고 있었으나 형식적인 학교 성교육 실시로 인해 학생들의 만족도는 긍정적인 응답을 한 학생이 14.1%정도로 매우 낮은 상태였다. 또한 62.3% 이상의 학생들이 인터넷이나 또래 친구들을 통해 왜곡된 성지식을 습득할 가능성이 높다는 것을 알 수 있었다. 셋째, 본 연구에서 개발한 STS 교수-학습 성교육 프로그램은 고등학교 수업시간인 50분에 기준을 두었다. 또한 수업 시 활용할 수 있는 탐구활동지와 PPT자료를 함께 개발하였다. 현재의 과학교과서 학습내용은 단순히 생물학적인 개념을 전달하는 정도에 머물고 있어, 학생들이 성에 대한 바른 태도를 기르기에는 미흡하다. 따라서 본 연구에서 개발한 프로그램에 사용된 영상물 이외에도 모형이나 기구를 이용하여 성지식과 성태도 향상을 유도할 수 있는 성교육 프로그램의 개발이 필요하다. 또한 과학적인 성지식과 더불어 올바른 성윤리 의식을 일깨워 줄 수 있는 성교육 내용이 모든 교과서에서 언급되고 다루어진다면, 정규교육 과정을 통한 학교 성교육이 더욱 체계적으로 이루어질 수 있을 것이라고 사료된다. The sexual problems of teenagers has become an issue due to their opened sex-culture. Recent researches published that STS teaching-learning program is an effective for not only the improvement of learning attitude but also academic achievement. Among the science subjects, the importance of biology related research is being emerged through this and more research is being suggested. Therefore this research emphasized the importance of sexual education for the 10th grade biology field science text book which is in charge of sexual education. The questionnare asking what students want to learn during biology class in the field of sexual education was done by second grade high school students from seoul. Also researchers analyzed the content of science textbooks related to sexual education. From this analyzed data STS teaching-learning method has been applied and developed the sexual education program. The purpose of this research is to activate the sexual education in high schools through this program. The summary of the analyzed research is followed below. First, based on the sex education domain in biological curriculum, 'the reproductive' chapter of high school science textbooks contains, 80% of 'structure and function of reproductive organs', 70% of 'pregnancy and birth' and 40% of 'sexual health'. However high school students demands were not met with this result they wanted to learn more about the 'sexual health' and 'structure and function of reproductive organs' last domain on the list. Second, currently majority of high schools are carrying out sexual education. Still because of typical sexual education from school, students satisfaction survey showed only 14.1% of students were satisfied with current sexual education program and 62.3% or more students had high possibility of learning distorted sexual knowledge from internet or friends at the same age. Third, the STS teaching-learning program for the sex education developed by this study runs for 50 minutes, one period in high school. Also research activity paper and PPT material has been made to use during the class. Current science text book for high school students simply teach biological concepts for sexual education. For this reason it's insufficient for the students to know right attitude of sex. Accordingly other than the media that has been used for the developed program, a model or a tool is needed, to develop sexual education program which will lead the improvement of sexual knowledge and attitude. Also if every text book carries out scientific sexual knowledge plus an sexual education which will remind students a right sexual ethnic consciousness, it is thought that the sex education at a school through a regular education course could be carried out more systematically.