http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PVC-Ni 복합재의 전기적 ${\cdot}$ 기계적 성질에 미치는 Titanate Coupling Agent 의 영향
문탁진,이미경,김선호,Tak Jin Moon,Mi Kyung Lee,Sun Ho Kim 대한화학회 1985 대한화학회지 Vol.29 No.3
충진제의 함량, titanate계 coupling agent의 종류, 처리량에 따른 PVC-Ni 복합재의 전기적.기계적 성질을 연구하였다. coupling agents처리에 의해 충진제의 분산상태가 양호해지고, 충진제 표면의 불순물이 대체되어 복합재의 전기저항은 감소되며 기계적 성질을 연구하였다. coupling agent처리에 의해 충진제의 분산상태가 양호해지고, 충진제 표면의 불순물이 대체되어 복합재의 전기저항은 감소되며 기계적 성질들은 향상되나 과량의 coupling agent의 처리는 이들 효과를 상쇄함을 보였다. The effect of titanate coupling agents on the electrical and mechanical properties of conductive poly (vinyl chloride)-nickel composite was studied as functions of filler concentration, the variation of the amount of titanate coupling agents and the type of titanate coupling agents. It was found that the electrical and mechanical properties of PVC-Ni system were improved by the treatment of titanate coupling agents, but the excessive use of titanate coupling agents influenced to give worse properties.
Bentone-Polyethylene Thickened Greases
문탁진,한기철,Moon Tak Jin,Han Ki Chul Korean Chemical Society 1977 대한화학회지 Vol.21 No.5
벤톤-폴리에틸렌 및 벤톤-폴리프로필렌을 적당한 온도에서 광유에 분산시키므로써 점토-고분자를 농조제로 사용한 그리이스를 만들었으며, 내마모성, 내수성, 산화안정성, 혼화안정성 및 직점등의 그리이스의 물성을 측정하였다. 그리이스의 성질중 내수성과 같이, 좋지 못한 성질이 간혹 나왔으나 이들 그리이스의 성상을, 이 실험에서 만든 점토-금속비누 그리이스의 성상과 비교 검토할 때 특수목적에 쓸 수 있음을 알았다. Clay-polymer thickened greases were made by dispersing bentone-polyethylene and bentone-atactic polypropylene into mineral oil at an adequate temperature, and the physical properties such as wear and water washout characteristics, oxidation and shear stabilities, and dropping point of the greases were tested. Even if the greases failed to meet some properties, it was found that those greases can be used for some special purposes, by observing and comparing the properties with those of clay-metallic soap thickened greases that were made in this experiment.
문탁진,송흥원,권오관,Moon, Tak Jin,Song, Heung Won,Kwon, Oh Kwan 대한화학회 1970 대한화학회지 Vol.14 No.2
Four-ball EP and wear testers were used to study the effects of thickeners and additives on the EP and wear properties of some Korean greases. The EP property improved in the order of Li < Al < Ca, and the concentration of thickener did not affect the property when the same base oil and additives were used. The anti-wear property was improved in general when the additives were used.
문탁진,임대순,Tak Jin Moon,Dae Soon Im 대한화학회 1982 대한화학회지 Vol.26 No.6
유한요소법을 이용하여 니켈입자가 분산된 폴리에틸렌의 기계적 성질을 추정하였다. 이 해석에서 다음 2단계의 과정을 통해 조사하였다. 첫 단계는 모재의 중심부에 구상의 물질을 포함하는 이른바 단일요소 모델을 생각하여 이것을 유한요소법에 의해 계산하였고, 다음 단계는 이러한 단일요소 모델이 모여 전체를 구성하고 있으므로 이 단일 모델이 조합된 형태의 전체 모델을 설정하여 해석 하는 것이다. 이 두 과정에서 니켈과 폴리에틸렌의 두상만을 고려한 2상 모델과, 니켈과 폴리에틸렌의 복합재료에서 이른 바 transcrystalline 구역이 관찰되어 이 구역을 고려한 3상 모델의 두 모델을 각각 사용하여 그 차이를 살펴 보았다. 유한요소법은 임의의 하중에서 응력 및 변위의 계산을 가능하게 한다. 이 컴퓨터로 계산된 출력으로 부터 탄성계수, poisson 비 및 복합재료의 응력 분포등을 얻을 수 있었다. 이 유한요소법에 의한 계산과 인장 실험을 통한 실험결과는 서로 잘 일치한다. The mechanical properties of nickel particle polyethylene composites were estimated by using a finite element method. Two steps were carried out in this analysis; the first step was to consider an unit model composed of spherical cell in the center of the matrix and the second step was to consider a total model composed of unit model. Two phase and three phase models were used, since another third phase were observed between matrix and nickel particle. Finite element method permits the calculation of the stress and displacement, assuming the arbitrary loads. Elastic modulus, Poisson's ratio and stress distribution of composites were obtained from this output. Comparison of the calculation by finite element method and the experimental results for Ni-filled polyethylene showed good agreement in tensile properties.