http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
균일한 크기의 구형 TiO<sub>2</sub> 입자 합성 및 광촉매 반응을 통한 Rhodamine B 분해
문종태,이경우,김나연,주지봉 한국공업화학회 2018 한국공업화학회 연구논문 초록집 Vol.2018 No.0
산업의 발전으로 인하여 많은 환경문제가 발생되고 있다. 수질 오염문제는 생활하수 및 산업폐수 등으로 인하여 유발되며, 그로인한 녹조현상 및 수중생물의 폐사 등이 일어나고 있다. 수질 오염 문제를 해결하고, 오염원 배출을 방지하기 위하여 다양한 기술들이 제안 되었지만, 국소적인 수질 정화만 가능한 실정이다. 많은 연구자들은 무한한 양을 가지는 태양에너지를 이용하여 오염물을 제거하는 연구를 수행하였다. 특히 태양광을 이용한 유해물질을 제거하는 광촉매기술은 많은 양의 유기성 오염원을 제거하기 위한 가장 획기적인 방법이라고 간주되고 있다. 본 연구에서는 광촉매로 사용될 수 있는 균일한 크기의 구형 TiO2를 제조하고 광화학적 Rhodamine B의 분해능을 확인하였다. 구형 TiO2 입자는 제조 과정 중에 여러 가지 합성 조건(용매, 전구체, 계면활성제)에 따라 그 물리적 특성이 제어되는 것을 확인하였으며, 열처리 온도에 따라 결정성이 조절되며, 그에 따라 반응성의 차이가 보이는 것을 확인 할 수 있었다. 광화학적 Rhodamine B 분해실험 결과, 아나타제 및 라타일 결정상이 섞인 구형 TiO2 입자에서 높은 분해능을 보임을 알 수 있었다.
문종태,엄용성,이종현,Moon, Jong-Tae,Eom, Yong-Sung,Lee, Jong-Hyun 대한용접접합학회 2015 대한용접·접합학회지 Vol.33 No.3
With the simplicity of process and high reliability in chip or package bonding, epoxy solder paste (ESP) has been recently considered as a competitive bonding material. The ESP material is composed of solder powder and epoxy formulation which can remove oxide layers on the surface of solder powder and pad finish metal. The bonding formed using ESP shows outstanding bonding strength and suppresses electrical short between adjacent pads or leads owing to the reinforced structure by cured epoxy after the bonding. ESP is also expected to suppress the formation and growth of whisker on the pads or leads. With the mentioned advantages, ESP is anticipated to become a spotlighted bonding material in the assembly of flexible electronics and electronic modules in automotive vehicles.
리플로시 가열 속도에 따른 Pb-In 합금의 솔도볼 형상 변화에 관한 연구
문종태,이상환,주관종,이희태,송민규,편광의,Mun, Jong-Tae,Lee, Sang-Hwan,Ju, Gwan-Jong,Lee, Hui-Tae,Song, Min-Gyu,Pyeon, Gwang-Ui 한국재료학회 1997 한국재료학회지 Vol.7 No.4
Pb-In솔더를 Si기판에 증착후 리플로시 가열 속도와 플럭스 사용에 따른 솔도볼 형성 거동, 증착 솔더이동, UBM(under Mump Metallurgy)의 Au층과 In간의 금속간 화합물 형성에 관하여 연구하였다. 가열 속도가 1$^{\circ}C$/min에서 1$0^{\circ}C$/min, 2$0^{\circ}C$/min로 증가하고, 플럭스를 적용한 경우 솔더볼은 용이하게 형성되었다. 특히 플럭스를 사용하여 형성시킨 솔더볼에서는 UBM Au층과 In간의 반응에 의하여 Auln 금속간 화합물이 형성되었다.
Ti-Al-C 합금의 고온 자전 합성 반응시 생성상에 관한 연구
문종태 한국분말야금학회 1995 한국분말재료학회지 (KPMI) Vol.2 No.2
In this study, an attempt was made to fabricate TiAl as well as its in situ composite via combustion synthesis. The processing variable of the combustion synthesis which include aluminum content and the heating rate were found to affect the combustion temperature. The combustion temperature measured, however, was lower than the melting temperature of TiAl and the reaction product were found to include incomplet reaction products. Carbon was added in order to increase the combustion temperature as well as to form in situ reinforcements. The reaction products showed homogeneous microstructures with carbide phases formed within indicating that the addition of carbon increased the combustion temperature above the melting temperature of TiAl.
고온 자전 합성시 반응열 제어가 TiAl 미세 조직에 미치는 영향에 관한 연구
문종태,염종택,신봉문,김용석,이용호,Mun, Jong-Tae,Yeom, Jong-Taek,Sin, Bong-Mun,Kim, Yong-Seok,Lee, Yong-Ho 한국재료학회 1995 한국재료학회지 Vol.5 No.7
TiAi intermetallic compound has been extensively studied for possible high temperature structural applications because of its high specific strength at high temperature, high creep resistance, and good oxidation resistance at elevated temperatures. In addition to its good properties, an economic manufacturing routes should be developed for this material to be used more extensively. One of the promising route in manufacturing TiAl intermetallics is the Self-propagating High-temperature Synthesis (SHS) method. Thus in this study, an attempt was made to study the mechanism of the SHS process in TiAl synthesis. The composition of the sample was Ti-(45, 50, 53)at% Al and the microstuctures of the products were analyzed using optical microscope and scanning electron microscope. When the phases formed at the main SHS reaction of whicyh combustion temperature is higher than the melting temperature of aluminum were identified as TiAl and Ti$_3$Al ; Ti$_3$Al cores surrounded by TiAl phase. In order to increase the combustion temperature, carbon was added 5 and 10at.%. When the carbon content was 10at.%, the heat of the reaction was large enough to melt the phase formed and that is consistent with the theoretical calculation results of the adiabatic temperature. The combution temperatue, which was measured by a computer data acquisition system, increased with the carbon content. The phases formed from the reaction involving the carbon added were indentified as TiAl and Ti$_2$AlC using XRD. The vickers hardness of the reaction product increased with the carbon content.
문종태,이용호,Mun, Jong-Tae,Lee, Yong-Ho 한국재료학회 1995 한국재료학회지 Vol.5 No.3
본 연구에서는 TiAl 금속간 화합물을 자전 고온 반응법을 이용하여 제조시 반응과정을 열시차 분석 방법으로 분석하였다. 합금 조성은 Ti-45at% Al, 53at%Al, 알루미늄 분말 크기, 승온 속도, 성형 밀도 등을 변화시켜 이들이 반응 과정에 미치는 영향을 관찰하였다. 분말이 미세할수록, 승온속도가 느릴수록, 성형 밀도가 낮을수록 반응 점화 온도 및 연소 온도가 감소하였으며, 고상 Ti와 고상 Al간의 반응정도가 증가하는 것이 관찰되었다. 고상 Ti와 고상 Al간의 반응에서 생성되는 것은 XRD 분석 결과 Ti$Al_{3}$상으로 확인되었다. 이에 비하여 반응 점화 온도가 알루미늄의 용융 온도보가 높을 경우에는 생성되는 상이 $Ti_{3}$Al, TiAl상으로 확인되었다. 이러한 상의 생성 원인에 대하여 확산 계수 및 알루미늄의 용해도등의 요인으로 설명하였다.