http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
AWGN 채널에서 100Mbps급 M-ary PPM/TH 초광대역 통신 시스템의 설계 및 성능 분석
문용규,이양선,강희조,양승인 한국전자파학회 2003 한국전자파학회논문지 Vol.14 No.2
본 논문에서는 FCC에서 제정한 허용 주파수 대역 내에서 100 Mbps급 M-ary PPM/TH UWB 시스템 설계를 위한 특성 파라미터의 규격을 제안하고, AWGN 채널에서 제안된 시스템의 성능을 분석하였다. 성능 분석 결과, 이 시스템에 적용 가능한 펄스 주기는 매우 한정적이며, 시스템의 데이터 전송률을 일정하게 할 경우, M과 펄스반복 개수가 증가할수록 시스템 성능은 개선되고, 사용자 수는 감소됨을 관측하였다. In this paper we proposed system parameter values of M-ary PPM/TH(Pulse Position Modulation/Time Hopping) ultra-wideband systems having data rate of 100 Mbps for the frequency band, which is allocated by Federal Communications Commission(FCC). We also analyzed performance of the proposed system in the AWGN channels. According to the results of performance analysis, It is observed that available pulse duration is very limitative for this system. In case of constant data rate, if M and the pulse repetition numbers are increased, then the system performance is improved and the user number is decreased.
직접회로를 위한 자기 박막 인덕터의 설계 및 제조에 관한 연구
문용규,김형균 圓光大學校大學院 1998 論文集 Vol.21 No.-
Magnetic thin film inductors are designed and febricated which have operating frequencies over 10 ㎒ and several hundred nh of inductance suiable for ICs. To calculate magnetic field and magnetic flux densit of the devices, 3 dimensional as well as 2 dimensional Finite Element Method (FEM) is used. Thin film inductors are designed by computer simulaion to have the best performances. Rebrication of the devices utilize vacuum deposition of various films and photolithographic processes which are commomly used in semiconductor processes. The performance of the febricated inductors are analyzed by Impedance analyzer and Ntwork analyzer for measuring inductance and resistance and obtaining Q.
실내 환경에서 다층 퍼셉트론 모델과 전파 전파 특성파라미터를 이용한 무선 근거리통신망의 최적 셀 설계
김광윤,문용규 한국컴퓨터산업학회 2002 컴퓨터産業敎育學會論文誌 Vol.3 No.5
본 논문은 MLP 모델과 전파 특성 파라미터를 이용하여 실내환경에서 무선근거리통신망에 대한 전파 경로 손실 예측 알고리듬을 제안하였다. 100mW의 송신출력과 2.4GHz의 주파수를 갖는 무선근거리통신망에 대한 실내 경로손실을 예측하고 측정된 값과 비교하였다. 비교된 측정값과 예측값 사이의 차이는 다양한 경로손실 요인들에 대한 정확한 분석을 통하여 감소시킬 수 있다. 제안된 전파 경로 손실 예측 모델을 이용하여 특정 실내환경에서의 AP 위치를 선정함으로써 최적 셀 설계를 수행하였다. This paper was proposed a wave path loss prediction algorithm using multilayer perceptron (MLP) model and wave propagation characteristic parameters for Wireless LAN in indoor radio environments. Receiving power was predicted by calculating indoor path loss in a Wireless LAN that has transmission power of 100mW and frequency of 2.4GHz, and was compared with measured. In the result of measurement shows that there is a difference between predicted and measured receiving power which can be reduced by an accurate analysis of the various path loss factors. In order to fix the access point(AP) positions was used the proposed a wave path loss prediction algorithm, and designed the optimum cell for Wireless LAN.
다원접속 통신을 위한 초광대역 임펄스 무선 전송 시스템 연구
이양선,강희조,문용규,양승인 한국통신학회 2003 韓國通信學會論文誌 Vol.28 No.3C
본 논문에서는 FCC에서 제정한 허용 주파수 3.1~10.6 GHz 대역 내에서 IR 시스템 설계를 위한 특성 파라미터를 유도하고, 다원접속 간섭 환경에서 IR 시스템의 오율 성능을 분석하였다. 결과에 의하면, FCC에서 제정한 허용 주파수 범위 내에서 적용 가능한 펄스 주기($t_{n}$) 는 0.04~0.0326 ns로 매우 한정됨을 알 수 있었다. 또한, 시스템 성능 변화에 있어서 펄스 주기보다는 펄스반복개수($N_{s}$ )에 의해서 시스템 성능이 크게 변화되는 것을 알 수 있었다. 따라서, 다원접속 시스템 설계 시 동시 사용자 수에 따라 모노 펄스의 주기 및 프레임 단위 시간(Τ$_{f}$ )의 설정이 필요하고 전송율에 따른 적정한 펄스 반복 개수를 설계해야 함을 알 수 있었다. 다원접속 간섭 발생 시에는 50Mbps 이상의 고속 전송을 요하는 IR 시스템에서 다원접속 간섭 자체로 인해 매우 심각한 성능 열화가 발생하는 것을 알 수 있었고, 따라서, 고속 전송 다원접속 IR 시스템 설계 시에는 다원접속 간섭을 제거할 수 있는 추가적인 보상기법이 동시에 설계되어야 함을 알 수 있었다. In this paper we proposed system parameter values of ultra-wideband Impulse Radio systems for the frequency band(3.1~10.6GHz), which is allocated by Federal Communications Commission(FCC). We also analyzed performance of the proposed system in the multiple access interference environment. According to result, application of possible pulse duration($t_{n}$) is very limited by 0.04~0.0326 ns in permission frequency range that establish in FCC. In the case of the same pulse signal power, we could know that system performance was changed by pulse repetition number($N_{s}$ ) regardless of pulse duration. Thus, We could know that we have to need duration of monocycle pulse and setting of frame un it time(Τ$_{f}$ ) according to multi user numbers and design proper pulse repetition number by transfer rate in multiple access systems design. In the IR system that needs high speed transmission more than 50 Mbps in multiple access interference environment, we could know that very serious performance decrease by multiple access interference happens. Therefore, as the design of high speed multiple access IR system, it should be designed to additional improvement techniques that can remove multiple access interference at the same time.
김동호,백승선,문용규,강희조 한국정보통신학회 2002 한국정보통신학회논문지 Vol.6 No.3
Recently, the FCC commissioners approved limited uses of UWB, and have promised to review the standards to explore the potential of more flexible standards and to address the operation of additional types of UWB operations and technology. In this paper we study performances of UWB communication system according to M-ary schemes with BCH code. And under the AWGN channel, we analysis and compare error probability, the number of M-ary schemes to the two methods that pulse position modulation and pulse amplitude modulation. 최근 FCC 위원회에서는 제안적으로 UWB의 사용을 승인하였으며 기존의 UWB 기술을 보완하며 이 기술로 응용 가능한 표준안을 발표할 계획이다. 본 논문에서는 AWGN 채널에서 BCH를 채용시 M-ary 값이 변화함에 따른 UWB 통신 시스템의 성능을 비교하였다. 또한 UWB 변조방식으로 고려되어 오던 M-ary PAM과 PPM의 방식을 M-ary 수를 변화시킴에 따라 에러 확률을 비교 분석하였다.