http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
중파방송 송신소 내 eLoran용 송신 안테나 동일 장소 배치 및 분석
김기남(Ki-nam Kim),목하균(Ha-kyun Mok),구한이(Hanni Koo),남상욱(Sangwook Nam) 한국전자파학회 2016 한국전자파학회논문지 Vol.27 No.12
본 논문에서는 중파방송 송신소 내 중파송신 안테나와 동일 장소에 배치(Co-location)된 eLoran 송신 안테나의 모델을 제시하고, 이를 분석하였다. 먼저 eLoran 송신 안테나의 적합한 구조로 가장 일반적인 형태인 우산형 상부장하소자(TLE: Top-loading wire)가 연결된 모노폴 안테나를 적용하였다. 설계된 eLoran용 송신 안테나를 중파송신 안테나와 동일 장소 내 배치 유무에 따른 방사패턴과 반사손실을 비교하여 서로 일치함을 보였다. 또한, 동일 장소 배치에 따른 송신회로의 영향을 확인하기 위해 eLoran 및 중파송신 안테나 매칭회로를 모두 포함한 커플링을 분석하였다. 그 결과, eLoran 중심주파수인 100 kHz에서 —53.3 dB, 중파송신 안테나의 동작주파수인 1,053 kHz에서 —64.8 dB로 커플링에 의한 영향은 미미함을 확인하여 설계 타당성을 보였다. The eLoran(enhanced Long Range Navigation) transmitting antenna is analyzed for co-location with an AM transmitting antenna in an MF transmitting site. To compensate for the loading effect, the umbrella-type loading is applied for eLoran antenna. The validity of the co-location between the MF antenna and the eLoran antenna is verified through the simulation results of the radiation pattern and the return loss. Also, coupling including antenna matching circuit is analyzed to verify the effect of the transmitting circuit. The coupling between the LF and eLoran antenna is —53.3 dB at 100 kHz and —64.8 dB at 1,053 kHz, respectively.
지상파 디지털 TV 방송용 송신기에서 변조기의 위상오차 보상에 관한 알고리듬 구현
오인열,양경석,이철,목하균,오성환,Oh, Inn-Yeal,Yang, Kyung-Seok,Lee, Chul,Mok, Ha-Kyun,Oh, Seong-Hwan 한국통신학회 1999 韓國通信學會論文誌 Vol.24 No.6
본 논문은 최근 지상파 디지털TV 표준 방식으로 정해진 8VSB(8 Levels Vestigial Side Band) 방식의 변조기에 관련된 내용이다. 디지털TV 시스템 개발에 있어서 가장 어려운 문제점 중 하나는 위상오차를 해결하여 얼마나 디지털 신호를 왜곡 없이 사용자에게 전송할 수 있느냐\ulcorner 이다. 그러나 설계상의 문제, 환경변화, 부품의 열화등의 원인에 의해 발생될 수 있는 위상오차는 VSB 방식의 변조기에서의 I, Q 데이터에 왜곡을 일으키게 하거나, 1KW 이상의 송신을 하는 방송 장비에 유지되어 타 인접 채널에 심각한 영향을 일으키기도 한다. 이와 관련하여 본 논문에서는 위상오차 원인 중의 하나인 8레벨의 디지털 신호에서 IF(Intermediate Frequency) 주파수대로 변환될 때에 발생되는 위상오차를 분석하였고, 이에 대한 보상 알고리듬을 제안하였고, 이를 적용한 결과를 논하였다. In this paper, we have studied the 8 YSB (8 Vestigial Side Band) method which is decided as the standard of modulators for next generation digital TV System. In developing digital TV System, one of the difficult problems is how digital signal can be transmitted to the receiver without any phase distortion. But, phase error is liable to occur by imperfect design, circumstance variation and device degradation. These characteristics result in distortion of 1,0 signal of modulator and interference in adjacent channels. In particular, the interference in modulator of a high power amplifier result in serious problems in adjacent channels. Here we analyzed problems of phase error which are occurred when 8 levels digital signals are modulated to If signal. And we suggested phase error compensation algorithm and discussed the results for adaptation of the algorithm