http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기반 기술 : 끊김 없는 데이터 서비스를 위한 무선 망 연결방법
노재성 ( Jae-sung Roh ),김완태 ( Wan-tae Kim ) 한국항행학회 2015 韓國航行學會論文誌 Vol.19 No.6
최근 무선 데이터 서비스는 스마트폰을 중심으로 다양한 멀티미디어 기기들로 확산되고 있다. 무선 데이터 서비스는 과거 유선망을 기반으로 하는 데이터 서비스에서 모바일 기기를 이용한 무선 데이터 서비스로 대체되고, 특히 국내에서는 Wi-Fi (Wireless-Fidelity) 서비스 와 LTE (long term evolution) 서비스를 동시에 지원하는 단말기가 증가하고 있다. 현재 Wi-Fi 서비스망을 이용한데이터 서비스는 무료로 제공되며, LET 망을 이용한 데이터 서비스는 유료로 제공 된다. 따라서 하나의 단말이 두 서비스를 동시에 지원하기 위해서 Wi-Fi 서비스를 우선순위로 하는 스마트 전환 기능을 제공하고 있다. 하지만 하나의 단말이 두 가지 서비스 지원을 위해 Wi-Fi 망과 LTE 망 사이에서 로밍과 핸드오버를 수행하는 과정 중 데이터 서비스가 멈추는 문제가 빈번히 발생되고 있다. 본 논문에서는 끊김 없는 무선데이터 서비스 지원을 위해 망과 망 전환 시 발생되는 데이터 서비스의 끊김 현상을 해결하기 위한 방법을 제안하였다. Recently wireless data services have widely spread on various multimedia devices such as smart phones and tablets. Existing wired data services have been replaced by wireless data services using mobile devices. Especially domestic mobile devices supporting both Wireless-Fidelity (Wi-Fi) and long term evolution (LTE) services have increased steadily. While Wi-Fi network is provided free of charge, LTE network is offered to pay for. Therefore, mobile devices provide smart network switch to support both preferred Wi-Fi and LTE networks. However, such handover and roaming between Wi-Fi and LTE networks can cause data connection stop in spite of charged data services. This paper has proposed the method to overcome data connection stop for guaranteeing seamless data service during handover and roaming procedures between networks.
무선 UWB 거리인식 시스템을 위한 Link Budget 분석에 관한 연구
노재성 ( Jae-sung Roh ),신유섭 ( Yu Sub Shin ) 한국정보처리학회 2011 한국정보처리학회 학술대회논문집 Vol.18 No.1
최근 WPAN 분야의 솔루션인 IEEE 802.15.4a는 저소비 전력으로 통신과 거리측정을 동시에 가능케 하는 PHY 제정을 목표로 하고 있다. 본 논문은 IEEE802.15.4a 물리계층에서 사용하는 UWB 신호를 대상으로 거리인식 시스템을 위한 Link Budget을 분석한다. 거리인식 시스템의 성능은 무선 채널의 다중경로 프로파일에도 관계된다. 따라서 본 연구에서는 IEEE 802.15.4a 채널 특성인 Residential 및 Office 환경을 고려하여 거리인식 시스템을 위한 Link Budget을 분석하였으며 연구된 내용은 다양한 거리추정 방식에 적용하여 거리추정 정밀도 향상에 기여할 수 있을 것이다.
차세대 이동통신 시스템을 위한 PAPR 감소와 대역 내 왜곡보정 기법에 대한 연구
노재성 ( Jae Sung Roh ),김완태 ( Wan Tae Kim ) 한국항행학회 2012 韓國航行學會論文誌 Vol.16 No.2
차세대 이동통신 시스템은 다양한 서비스를 지원하기 위해 다양한 분야에서 연구되며 응용되고 있다. 차세대 이동통신 시스템 연구에 있어 최대 관심은 다양한 통신시스템의 통합과 빠른 데이터 전송을 이용한 다양한 서비스의 제공이다. 통신시스템의 통합은 Multi Standard Modem을 이용하여 연구되고 있으며, 다양한 서비스 제공을 위한 빠른 데이터 전송은 OFDM(Othogonal Frequency Division Multiplexing) 방식이 적용되고 있다. 본 논문에서는 차세대 이동통신을 위한 Multi Standard Modem을 이용하여 PAPR(Peak-to-Average Power Ratio)을 감소시키기 위한 방법을 제안하고, PAPR 감소 중 발생되는 문제점인 대역 내 왜곡을 EVM(Error Vector Magnitude)을 이용하여 보정하는 기법을 제안하였다. 본 논문에서는 제안한 방법을 이용하여 차세대 이동통신 시스템의 PAPR 감소 효율, CCDF(Complementary Cumulative Distribution Function)와 BER(Bit Error Rate) 성능을 시뮬레이션을 통해 분석했다. 시뮬레이션 결과 차세대 이동통신 시스템의 성능이 개선됨을 알 수 있다. Next generation mobile communication systems have been studied and applied to support various services. In next generation mobile communication systems, the most interested research is the integration of various communication systems and the offer of various services by using high-speed data transmission. The integration of communication systems has been researched by using multi standard modem, while the high-speed data transmission for the offer of various services has been applied by using OFDM. This paper has proposed the method to reduce PAPR by using multi standard modem. with EVM , this paper has also suggested the method to compensate in-band distortion while reducing PAPR. By using the proposed methods, this paper has analyzed and simulated the decrease efficiency of PAPR, the performance of CCDF, and the performance of BER in next generation mobile communication systems. The simulation results improved the performance of next generation mobile communication system can be seen that.
통계적 모델링 기반의 임펄스 잡음 채널에서 수동형 UHF RFID 시스템의 성능
노재성 ( Jae-sung Roh ) 한국항행학회 2023 韓國航行學會論文誌 Vol.27 No.6
RFID(Radio Frequency Identification) 시스템은 응용 서비스의 비용과 에너지 효율성으로 인해 사물인터넷 기술의 핵심 구성 요소로 각광받고 있다. RFID 기술을 사물인터넷 응용 서비스 분야에서 사용하기 위해서는 RFID 시스템의 리더와 태그 사이의 단순한 인식뿐만 아니라 다양한 정보를 장기간 저장하고 관리할 수 있어야 한다. 그리고 정보를 태그에 읽고 쓰기 위하여 열악한 무선 채널에 강하고 신뢰성 있는 성능 향상 기술이 필요하다. 특히, UHF(Ultra High Frequency) RFID 시스템에서는 다수의 태그가 밀집 환경에서 수동적인 방법으로 통신하기 때문에 개별 태그의 인식률과 전송속도 향상이 필수적이다. 본 논문에서는 임펄스 잡음 환경에서 RFID 시스템의 성능을 분석하기 위하여 Middleton의 A급 임펄스 잡음 모델을 선정하였고 태그에서는 FM0 인코딩과 Miller 인코딩을 적용하여 RFID 시스템의 오율 성능을 분석하였다. Middleton의 A급 임펄스 잡음 채널에서 RFID 시스템의 성능을 분석한 결과, 가우스 잡음 대 임펄스 잡음의 전력비 값과 임펄스 잡음 지수 값이 클수록 가우시안 잡음 채널과 유사함을 알 수 있었다. RFID(Radio Frequency Identification) systems are attracting attention as a key component of Internet of Things technology due to the cost and energy efficiency of application services. In order to use RFID technology in the IoT application service field, it is necessary to be able to store and manage various information for a long period of time as well as simple recognition between the reader and tag of the RFID system. And in order to read and write information to tags, a performance improvement technology that is strong and reliable in poor wireless channels is needed. In particular, in the UHF(Ultra High Frequency) RFID system, since multiple tags communicate passively in a crowded environment, it is essential to improve the recognition rate and transmission speed of individual tags. In this paper, Middleton's Class A impulsive noise model was selected to analyze the performance of the RFID system in an impulsive noise environment, and FM0 encoding and Miller encoding were applied to the tag to analyze the error rate performance of the RFID system. As a result of analyzing the performance of the RFID system in Middleton's Class A impulsive noise channel, it was found that the larger the Gaussian noise to impulsive noise power ratio and the impulsive noise index, the more similar the characteristics to the Gaussian noise channel.