http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다중 셀 평균 기반 CFAR 검출을 이용한 SAR 영상 표적 탐지 기법
송우영(Woo-Young Song),노수현(Soo-Hyun Rho),정철호(Chul-Ho Jung),곽영길(Young-Kil Kwag) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.2
최근 SAR(Synthetic Aperture Radar) 영상의 거리 및 도플러 해상도가 높아짐에 따라 표적의 탐지 정확도는 향상되고 있지만 처리할 데이터 용량이 급증하고 있다. 기존의 단일 셀 기반 CFAR 검출기는 전체 영상 내에서 모든 거리 셀 데이터를 검사하여야 하므로 CFAR 검출기의 속도 성능 저하를 가져온다. 본 논문에서는 다중셀 기반 CFAR 처리 방법을 2단으로 개선하여 1단계에서는 다중 셀 평균 기반 CFAR 검출을 이용하여 예상 표적 지역을 검출하고, 2단계에서는 예상 표적 지역에 대해서만 단일 셀 기반 CFAR 검출을 수행함으로써 처리 시간을 줄이고 표적의 탐지 성능을 획기적으로 향상시켰다. 제안된 기법에 대한 성능은 실제 SAR 영상을 통하여 기존의 단일 셀 기반 방식과 다중 셀 평균 기반 검출 방식을 비교 분석하였다. Since the range and Doppler resolution of the synthetic aperture radar(SAR) image becomes very high, the target detection accuracy can be significantly increased, but the computational burden is also increased. The conventional single-cell based CFAR detector performs the target detection on every single cell basis, thus it causes the serious increment of the computational load. In this paper, the improved two-step MCA-CFAR detector is proposed for the improvement of the target detection as well as the reduction of computational load: the first step is to use the MCA-CFAR, and the second step is to use the single-cell based CFAR detection in the expected target area for final decision. The performance of the proposed algorithm is compared with the conventional single-cell based CFAR and MCA-CFAR on SAR images.
접촉식 3차원 측정기를 이용한 항공용 영상 레이다 시스템의 실용적 지향오차 보정방법
전영범(Yeong-Beom Jeon),김진우(Jin-Woo Kim),노수현(Soo-Hyun Rho),옥재우(Jae-Woo Ok),이종은(Jong-Eun Lee),유응노(Eun-No You),윤상호(Sang-Ho Yoon) 제어로봇시스템학회 2018 제어·로봇·시스템학회 논문지 Vol.24 No.12
The quality of high-resolution images and moving target detection from air-borne Synthetic Aperture RADAR (SAR) systems is strongly affected by the pointing accuracy of the system. The accuracy is determined by the physical and electrical errors induced from the antenna and/or gimbal devices in the system. In this paper, a method to calibrate the errors was investigated using Contact-type Coordinate Measuring Machine (CMM). First, the features of the errors measured by CMM were analyzed, and the equation to compensate for the errors was derived from the features. Finally, this procedure was validated through field tests with several prototypes.
항공용 안테나 하이브리드 모노펄스 레이다 시스템의 실용적 표적 방위각 추정 방법
김진우(Jin-Woo Kim),윤재혁(Jae-Hyuk Youn),노수현(Soo-Hyun Rho),이종은(Rho1?Jong-Eun Lee),전영범(Yeong-Beom Jeon),옥재우(Jae-Woo Ok),유응노(Eung-Noh You),윤상호(Sang-Ho Yoon),신현익(Hyun-Ik Shin) 한국전자파학회 2018 한국전자파학회논문지 Vol.29 No.9
항공용 안테나 하이브리드 모노펄스 레이다 시스템을 이용하여 지상 이동표적 탐지 시, 표적의 방위각 정확도는 시스템 내 채널 간 위상 불균형에 따른 모노펄스 기울기 추정 정확도에 지배적으로 영향을 받는다. 본 논문에서는 안테나와 180도 하이브리드의 물리적 길이 차이에 의한 위상 불균형을 효과적으로 보상할 수 있는 방법을 제안 하였다. 비행시험을 통하여 제안된 방법의 성능을 검증한 결과, 보상 전보다 유의한 성능개선 효과를 확인할 수 있었다. The accuracy of extracting the azimuth angle of a target is significantly affected by the error in the mono-pulse ratio of the air-borne antenna hybrid mono-pulse Radar system. This error is strongly induced by the phase imbalance between the channels of the system. In this paper, a method is proposed for effectively calibrating the phase imbalance caused by physical differences between the RF channels from the antenna to the 180° hybrid. Through a flight test, it was confirmed that the accuracy of the azimuth angle of the target is improved by using the proposed method.