http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
노세현,박우찬,신현철,김상호,김영곤,김광년,정동근 대한의용생체공학회 2004 의공학회지 Vol.25 No.2
시각장애인의 시각보조를 위하여 공간 및 방향감각 보조시스템으로 초음파거리계 및 전자나침반을 개발하였다. 초음파거리계는 40 KHz 초음파의 반사를 이용하여 장애물까지 거리 정보를 거리에 비례하는 시간간격의 가청음 자극을 제공하며, 전자나침반은 자기저항브리지를 이용하여 지구자기장을 검출하고 자북 방향 정보를 이마주위의 진동모터를 통하여 촉각자극을 제공하도록 설계하였다. 초음파저리계의 측정범위는 0.065-3.26미터이며 전자나침반의 방향 분해능은 22.5도이다. 그리고 초음파거리계와 전자나침반을 통합한 일체형 시각보조시스템을 구현하였으며 이때 거리정보는 두부에서 진동모터의 위치로 전달하도록 하였다. 본 연구의 목표는 시각장애인의 공간 및 방향감각을 위한 실용적인 보조시스템을 구현하는 것이며, 본 보조시스템을 반복 사용함에 따라 시각장애인의 공간 및 방향감각 기능이 향상될 것으로 추측된다. In this study for the prosthesis of the spatial and directional sensation for the blind, an ultrasonic scale system and an electronic compass system were developed. The ultrasonic scale utilizes 40 ㎑ sound for the detection of distance to the barrier and the spatial information is transferred to the blind by various sound interval, which is proportional to the distance. The electronic compass utilizes a magnetoresistor bridge for the detection of the magnetic field strength of earth in horizontal plane. The information for the direction of the earth's north is transferred by tactile stimuli by a vibrating motor band around upper head. Detection distance of the ultrasonic scale is ranged from 0.065 to 3.26 meters, and the detection angle resolution of the electronic compass is about 22.5 degrees. The integrated system of the ultrasonic scale and the electronic compass was developed. Distance information is converted to the location of the tactile stimulation along the clockwise direction by a vibrating motor according to the distance installed around upper head of the blind. The intent of this article is to provide an practical prosthetic tool of spatial and directional sensation for the blind. Daily practice of this system will improve the usefulness of this system.
흡착식 냉동기 적용을 위한 친수/다공성 코팅 표면의 증발 열전달 특성 연구
노세현,김병련,Le Van Cong,박찬우 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.11
The purpose of this study is to compare heat transfer performance with existing heat plates by adding coating to them. This coating method uses TEOS to deposit Tio2 on hot plates and presents a simplified coating method. It was also performed in steel vacuum chambers to test evaporation performance in heat exchangers.
태양열 집열기 성능 촉진을 위한 난류 발생기 적용 고효율 메니폴더 설계 및 실험적 검증 연구
노세현(Se Hyeon Noh),박찬우(Chan Woo Park) 대한설비공학회 2022 대한설비공학회 학술발표대회논문집 Vol.2022 No.6
In this study, for the purpose of increasing the efficiency of the solar manifold current collector, the heat transfer amount was increased by inserting a turbulence generator into the solar manifold, and the heat transfer amount was compared and analyzed. The focus is on convenience in processing by inserting an insert without changing the shape of the existing menifolder.
저온 구동 흡착식 냉동기용 반만액식 증발기의 전열 촉진 코팅 성능 연구
노세현(Se Hyeon Noh),Zaher Ramadan,홍성주,박찬우(Chan Woo Park) 대한설비공학회 2022 대한설비공학회 학술발표대회논문집 Vol.2022 No.11
The purpose of this study is to compare heat transfer performance by applying coating to existing hot plates. This coating method proposes a simplified coating method deposited on the surface by a dip coating method using Tri-Oxide-Alumina. It was also carried out in a steel vacuum to test the evaporation performance of the heat exchanger.