RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        은 나노유체의 미세관내 층류 유동의 압력강하 및 열전달계수에 관한 실험적 연구

        권정태,남택훈,김태완,권영철,Kwon, Jeong-Tae,Nahm, Taek-Hun,Kim, Tae-Wan,Kwon, Young-Chul 한국산학기술학회 2009 한국산학기술학회논문지 Vol.10 No.12

        본 연구에서는 두 가지 종류의 미세관(외경 1/8inch, 3/16inch)을 사용하여 증류수 및 0.1vol.%, 0.3vol.%의 농도를 가지는 은 나노유체의 층류 유동 조건인 Re수 500~2,500의 범위에서 압력강하 및 나노유체의 열전달 계수를 실험적으로 구하였다. 압력강하의 경우 나노유체의 압력강하는 증류수에 비해 최대 21% 증가하였다. 대류열전달계수의 경우 나노유체 0.1vol%의 경우 증류수에 비해 1/8inch관에서는 약 3~42%, 3/16inch관에서는 약 3~69%의 향상이 있었다. 또한, 0.3vol%의 경우 1/8inch관에서는 약 35~65%, 3/16inch관에서는 약 62~125%의 향상이 있는 것을 알 수 있었다. 이상의 결과에서 은나노유체를 기계 및 전자 시스템의 냉각제로 사용할 경우 증류수에 비해 매우 우수한 냉각성능을 보일 것으로 판단된다. This study presents the heat transfer and pressure drop characteristics of Ag nanofluid in mini-tubes(outer diameters of 1/8inch, 3/16inch). Experiments were performed for Reynolds numbers ranged from 500 to 2,500 and nanofluid concentrations of 0.1 and 0.3vol.%. The pressure drop of nanofluid flow increased by max. 21% compared with that of distilled water. The heat transfer coefficients of the nanofluid of 0.1 vol.% enhanced 3~42% for 1/8inch tube, and 3~69% for 3/16inch tube. Also, the heat transfer coefficients of the nanofluid of 0.3 vol.% enhanced 35~65% for 1/8inch tube, and 62~125% for 3/16inch tube. From the results Ag nanofluid can be a better candidate as a coolant than distilled water when using in mechanical and/or electronic systems.

      • 나노유체를 이용한 열전달 향상에 관한 연구

        권정태(Jeong Tae Kwon),남택훈(Taek Hun Nahm) 호서대학교 공업기술연구소 2009 공업기술연구 논문집 Vol.28 No.1

        This research is to find the heat tran sfer rate and the convective heat transfer characteristics of Agn an ofluids. The distilled water was used as a b ase fluid . The diam eter of the nano particles was about 1 5 0n monaverage . The test tubes were 1/8 and 3 / 1 6 inches in outerdiameters and 500 mm in length. The experiment was perform ed with Reynolds number of 5 0 0 〜 2 5 0 0 . T h e concen tration of the nanofluids were 0 .1 and 0 .3 vol.% . The convective heattran sferco efficients were enhanced by about 1 6 〜 5 4 % fo r 0 .1 vol .% and about 2 1 〜 6 9 % for 0 .3 vol .% nanofluids.

      • KCI등재

        전자기펌프의 설계 및 액체금속 유동의 수치해석

        권정태(Kwon, Jeong-Tae),김서현(Kim, Seo-Hyun),남택훈(Nahm, Taek-Hoon),임효재(Lim, Hyo-Jae),김창업(Kim, Chang-Eob) 한국산학기술학회 2009 한국산학기술학회논문지 Vol.10 No.10

        본 연구에서는 장하분배법(Load Distribution Method) 및 등가회로법(Equivalent Circuit Method)을 이용하여 액체금속이송을 위한 전자기펌프를 설계하고 제작하였다. 제작된 전자기펌프의 구동전력과 이에 상응하는 액체의 유 량관계를 구하였다. 액체금속유동에 가하는 전자기 힘(Lorentz force)의 크기에 따른 유속과 유량을 수치해석기법을 이 용하여 계산하였다. 수치해석결과를 상용코드인 FLUENT를 이용하여 계산한 결과와 비교하고 분석하였다. 다양한 전 자기력의 크기에 대한 액체금속(우드메탈)의 평균속도에 대한 결과는 FLUENT의 결과와 5%이내의 오차 내에서 잘 일치하였다. An electromagnetic pump has been designed using Load Distribution Method and Equivalent Circuit Method, and installed in a liquid metal flow system. The relation between the driving power of he electromagnetic pump and the flow rate was proposed. Also, the flow velocity and flow rate has been calculated by treating the Lorentz force as a source term in the Navier-Stokes equation. The calculation results were analyzed and compared with data from a commercial Code, FLUENT. They agreed well with each other within an error of 5%.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼