http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
플랜트 프로젝트의 구매조달 단계별 리스크 분석에 관한 연구
나성엽,문승재,유호선,Na, Sung-Yub,Moon, Seung-Jae,Yoo, Hoseon 한국플랜트학회 2009 플랜트 저널 Vol.5 No.3
In the plant EPC project, the procurement work can be considered as the most important part that affects the success or failure of project as it has the closest mutual influence in every execution process of the project. Procurement takes up generally 60% ~ 70% of the entire project budget and the current trend of plant EPC project becoming larger in scale and a variety of process technology being applied. So, it is needed to identify the risks that are expected to occur according to the stages of procurement work, namely, proposal stage, manufacturer selection and purchasing agreement stage, expediting the process management of manufacturer stage, inspection stage and logistics & transportation stage. The management of observation and control of the risks should be performed with the response techniques which are 'avoid',' transfer'and' mitigate'.
X-선 실시간 영상장치를 이용한 비파괴시험 조건 최적화 연구
최용규,나성엽 韓國非破壞檢査學會 1996 한국비파괴검사학회지 Vol.16 No.1
본 연구에서는 X선 실시간 영상장치를 이용하여 고체 추진기관과 같은 이질재료 복합구조물의 비파괴시험 조건 최적화 및 관측 가능한 최소 결함의 크기에 대하여 연구하였다. 실험에 사용된 시험편은 모의결함이 다양한 크기와 형상으로 가공된 steel plate였으며, 방사선 등가 원리를 이용하여 추진기관의 고체 추진제, 내열 고무, 연소관을 steel 등가 두께로 환산하여 설치 실험하였다. 실험결과, 시험 조건 인자인 확대율과 시험 재료의 등가 두께별 적용 에너지 및 조사선량률의 최적값을 구하였다. 이와 같이 모사 시험편을 이용한 모의실험은 대상 시험물을 검사하기 전 수행되어야 할 예비과정이며, 모든 이질재료 복합구조물의 비파괴시험에 적용할 수 있는 것으로 판단된다 This study gas investigated the optimization of NDT method and the minimum detectable defect size for complex structures such as the solid propellant, rocket motor using real time X-ray imaging system. Yest specimens were made of steel plates with various defect size, and installed with proper thickness for which solid propellant, rubber, and case converted to the steel equivalent thickness according to the radiographic equivalent theory. As the results, this examination obtained optimum magnification and X-ray energy, dose rate according to steel equivalent thickness, also, obtained the relationship between minimum detectable defect size and the ratio(defect depth/object thickness). Thus, this simulated test is the preliminary procedure before performing NDT for real objects, and is possibly applied for NDT of other complex structures.