http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
진공 이젝터-디퓨져 시스템내의 비정상 유동 과정에 관한 연구
Lijo Vincent,김희동(Heuydong Kim),T.Setoguchi 한국추진공학회 2009 한국추진공학회 학술대회논문집 Vol.2009 No.5
The objective of the present study is to analyze the transient flow through theejector system with the help of a computational fluid dynamics (CFD) method. An attempt is made to investigate the interesting and conflicting phenomenon of the infinite entrainment into the primary stream without an infinite mass supply from the secondary chamber. The results obtained show that the one and only condition in which an infinite mass entrainment can be possible in such types of ejectors is the generation of a re-circulation zone near the primary nozzle exit. The flow in the secondary chamber attains a state of dynamic equilibrium of pressures at the onset of the recirculation zone. A steady flow in the ejector system is valid only after this point.
Vincent Lijo,김희동(Heuydong Kim) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.5
Supersonic ejectors are simple mechanical components, which generally perform mixing and/or recompression of two fluid streams. Ejectors have found many applications in engineering. In aerospace engineering, they are used for altitude testing of a propulsion system by reducing the pressure of a test chamber. It is composed of three major sections: a vacuum test chamber, a propulsive nozzle, and a supersonic exhaust diffuser. This paper aims at the improvement of ejector-diffuser performance by focusing attention on reducing exhaust back flow into the test chamber, since alteration of the backflow or recirculation pattern appears as one of the potential means of significantly improving low supersonic ejector-diffuser performance. The simplest backflow-reduction device was an orifice plate at the duct inlet, which would pass the jet and entrained fluid but impede the movement of fluid upstream along the wall. Results clearly showed that the performance of ejector-diffuser system was improved for certain a range of system pressure ratios, whereas the orifice plate was detrimental to the ejector performance for higher pressure ratios. It is also found that there is no change in the performance of diffuser with orifice at its inlet, in terms of its pressure recovery. Hence an appropriately sized orifice system should produce considerable improvement in the ejector-diffuser performance in the intended range of pressure ratios.
압력비 변화과정이 과팽창 노즐에서 발생하는 비정상 횡력 특성에 미치는 영향
이종성(Jongsung Lee),김희동(Heuydong Kim) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.11
본 연구에서는 비정상 노즐 구동 압력비 변화가 유동장의 천이형태 및 횡력 특성에 어떠한 영향을 미치는지 조사하기 위하여 수치해석적 연구를 수행하였다. 비정상, 축대칭, 압축성 N-S 방정식을 유한 체적법으로 이산화 하였으며, SST k-ω 난류모델을 적용하였다. 엔진 정지 및 시동과정을 모사하기 위하여, NPR은 2~10의 범위에서 계산 하였다. 본 연구의 결과로 박리 유동과 히스테리시스 현상은 구동 압력비에 크게 의존하며, 또한 압력비 변동 시간이 횡력 특성에 지대한 영향을 미칠 수 있음을 알았다. In the present work, a numerical study is conducted to investigate the effect of the transient nozzle pressure ratio (NPR) on the flow fields inside the nozzle. The unsteady, compressible, axisymmetric, Navier-Stocks equations with SST k-ω turbulence model are solved using a fully implicit finite volume scheme. In order to simulate the start-up and shut-down processes of the engine, NPR is varied from 2.0 to 10.0. It is observed that the interaction patterns and the hysteresis phenomenon strongly depend on the time variation of NPR, leading to significantly different characteristics in the lateral forces.