http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김홍룡,조재철,유용택 한국전기전자재료학회 1994 電氣電子材料學會誌 Vol.7 No.2
The role of ZnS buffer layer not only suppresses chemical reactions between emission material and insulating material but also alters the luminescence and the crystallinity of the emission layer, if ZnS buffer layer was sandwiched between emission layer and insulating layer of electroluminescent device. In this research, we fabricated ZnS thin film with rf magnetron sputter system by varying rf power 100, 200W, substrate temperature 100, 150, 200, 250.deg. C and post-annealing temperature 200, 300, 400, 500.deg. C and analysed X-ray diffraction pattern, transmission spectra and cross section by SEM photograph for seeking the optimal crystallization condition of ZnS buffer layer. As a result, increasing the rf power, the crystallinity of ZnS thin film was improved. It was found that the ZnS thin film had better properties than anything else when fabricated with the following conditions ; rf power 200W, substrate temperature 150.deg. C, and post-annealing temperature 400.deg. C. ZnS thin film had the transmittance more than 80% in visible range. So it is suitable to use as a buffer layer of electroluminescent devices.
Kim, Hong-Yong,Cho, Yong-Ho 慶熙大學校 1985 論文集 Vol.14 No.-
本 硏究는 分別遠沈法으로 分離한 正常 成熟家兎의 肝 組織에 存在하는 Na^+ ―K^+ ―activated adenosine triphosphatase의 比活性度를 microsomal 分劃과 Supernatant 分劃으로부터 測定하고 이 酵素活動에 미치는 cycloheximide의 影響을 觀察한 바 다음과 같은 結論을 얻었다. 1. 正常 成熟家兎 肝에 存在하는 microsomal Na^+ ―K^+ ―activated ATPase 活性値는 1時間 동안 遊離되는 無機燐酸이 38.02±0.487 micromole 比活性度로 나타났으며 supernatant Na^+ ―K^+ activated ATPase는 10.94±0.261로 나타났다, 2. 그리고 whole microsomal 分劃內에 存在하는 Na^+ ―K^+ activated ATPase 活性은 48.96로 나타났다. 3. Microsome 膜에 結合되어 있는 microsomal Na^+ ―K^+ activated ATPase活性이 全活性 중 約 77.6%를 占有하고 있었고 supernatant Na^+ ―K^+ activated ATPase 活性은 約 24.4%가 含有하고 있다. 4. Cycloheximide 濃度를 0.4mM부터 2.0mM까지 增加하면서 microsoman Na^+ ―K^+ activated ATPase 活性에 미치는 影響을 觀察한 바 점차적으로 현저하게 抑制하였으나 supernatant Na^+ ―K^+ activated ATPase活性은 抑制하지 못하였다. 5. Microsomal Na^+ ―K^+ activated ATPase 活性을 抑制하는 cycloheximide의 抑制影響을 統計學的으로 處理한 바 아주 높은 意義으로 나타났다. 6. 正常 成熟家兎 肝의 microsomal Na^+ ―K^+ activated ATPase 酵素活性은 50% 抑制하는 cycloheximide의 抑制濃度는 約 0.971mM로 나타났었다, 以上과 같은 上記 實驗 結果로 미루어 보면 主로 抗眞菌劑로 使用되는 cycloheximide는 正常成熟家兎의 肝組織에 存在하는 Na^+ ―K^+ activated ATPase 酵素를 "cycloheximide sensitive ATPase"인 microsomal ATPase와 "cycloheximide non - sensitive activated ATPase" 인 supernatant Na^+ ―K^+ activated ATPase로 大別할 수 있다.
구봉근,한상훈,김홍룡 한국콘크리트학회 1993 콘크리트학회지 Vol.5 No.4
본 논문의 목적은 R.C.보 최적설계에 이산수학계획법을 적용하여 상세설계를 포함하는 실제설계의 가능성을 연구하기 위한 것이다. 이산최적문제에서 설계변수로는 단면의 총높이, 폭, 유효높이 및 길이방향철근의 단면적 그리고 전단철근의 단면적과 길이 방향철근의 절단점과 같은 상세변수 등이 고려되었다. 목적함수는 경비함수로 취했으며, 제약조건으로는 강도설계법에 의한 설계휨강도, 전단강도, 연성, 사용성, 콘크리트 덮개 및 철근간격, 복부보강 그리고 정착길이와 길이방향철근의 절단점 등에 관한 시방서 요구사항을 고려하여 문제를 형성하였다. 이산변수를 갖는 최적설계를 효율적으로 실행하기 위해 첫째단계에서 Feasible Direction Methed를 이용하여 연속최적해를 구했으며, 둘째단계에서 분기한계법(Branch and bound method)을 이용하여 이산최적해를 얻는 최적화 알고리즘을 제안하였다. 제안된 알고리즘의 신뢰도를 검증하기 위해 2개의 이산설계변수를 갖는 수치예에 적용하여 도해법 및 rounde-up method와 그 결과를 비교하였고, 단순지지된 R.C.보 및 2경간연속 R.C.보에 적용하여 제안된 알고리즘의 신뢰도, 효율성 및 적용성을 입증하였다. The objective of this paper is to look into the possibility of the detailed and practical optimum design of rt:inforced concrete beam using methods oi discrete mathematical programming. In this discrete optimum formulation, the design variables are the overall depth, width and effective depth of members, and area of longitudinal reinforcement. In addition, the details such as the amount of web reinforcement and cutoff points of longitudinal reinforcement are also considered as variables. Total cost has been used as the objective function. The constraints include the code requirments such as flexural strength, shear strength, ductility, serviceability, concrete cover. spacing, web reinforcement, and development length and cutoff points of longitudinal renforcement. An optimization algorithm is presented for effective optimum design of R.C. beam with discrete de sign variables. First, the continuous variable optimization can be achieved by Feasible Direction Method. Using the results obtained from the continuous variable optimization, a branch and bound method is used to obtained the discrete design values. The proposed algorithm is applied to test problem for reliability, and the results are compared with those of graphical method and rounded-up method. And a simply supported R.C. beam and a two-span continuous R.C. beam are presented as numerical examples for effectiveness and applicability. It is considered that the presented algorithm can be effectively applied to the discrete optimum design of R.C. beams.